hh3cBfdSessAddrType
HH3C-BFD-STD-MIB ·
.1.3.6.1.4.1.25506.2.72.1.3.1.8
Object
column
INET-ADDRESS-MIBInetAddressType
This object defines IP address type of the interface
associated with this BFD session.
Only values unknown(0), ipv4(1) or ipv6(2)
have to be supported.
A value of unknown(0) is allowed only when
the outgoing interface is of type point-to-point, or
when the BFD session is not associated with a specific
interface.
If any other unsupported values are attempted in a set
operation, the agent must return an inconsistentValue
error.
Context
- MIB
- HH3C-BFD-STD-MIB
- OID
.1.3.6.1.4.1.25506.2.72.1.3.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hh3cBfdSessEntry
- Table
- hh3cBfdSessTable
- Siblings
- 14
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hh3cBfdSessIndex This variable contains an index which represents a
unique BFD session on this device. | column | BfdSessIndexTC | .1.3.6.1.4.1.25506.2.72.1.3.1.1 |
| hh3cBfdSessRemoteAddr This variable defines IP address of the remote interface
from which the BFD packets is transmitted.
It can also be used to enabled BFD on a specific
interface. The value is set to… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.25506.2.72.1.3.1.10 |
| hh3cBfdSessLocalDiag The BFD diagnostic code for the BFD session was down with the
neighbor. If no such event happens this object contains a zero
value. | column | BfdDiag | .1.3.6.1.4.1.25506.2.72.1.3.1.11 |
| hh3cBfdSessState The state of the running BFD session.
There are three states through which a session normally
proceeds, two for establishing a session (Init and Up)
and one for tea… | column | Enumeration | .1.3.6.1.4.1.25506.2.72.1.3.1.12 |
| hh3cBfdSessControlPlanIndepFlag This variable indicates whether the local system
can continue to work while the control plane is out
of work. Specifically, it is set to true(1) if the
local system is independent… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.2.72.1.3.1.13 |
| hh3cBfdSessAuthFlag This variable indicates that the local system wants
to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or false(2… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.2.72.1.3.1.14 |
| hh3cBfdSessDemandModeFlag This variable indicates that the local system wants
to use Demand mode. Specifically, it is set
to true(1) if the local system wishes to use
Demand mode or false(2) if not | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.2.72.1.3.1.15 |
| hh3cBfdSessIfIndex This variable contains an interface's index under which the BFD
session runs. If hh3cBfdSessIfIndex is equal to 0, it means that
the BFD session does not specify an interface. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.25506.2.72.1.3.1.2 |
| hh3cBfdSessAppSupportId This variable contains an ID used to indicate
a local application which owns or maintains this
BFD session. Note, a BFD session can support several route
protocols. This is a bit-… | column | Bits | .1.3.6.1.4.1.25506.2.72.1.3.1.3 |
| hh3cBfdSessLocalDiscr This variable defines the local discriminator for this BFD
session, used to uniquely identify it. | column | Unsigned32 | .1.3.6.1.4.1.25506.2.72.1.3.1.4 |
| hh3cBfdSessRemoteDiscr This variable defines the session discriminator chosen
by the remote system for this BFD session. | column | Unsigned32 | .1.3.6.1.4.1.25506.2.72.1.3.1.5 |
| hh3cBfdSessDstPort The UDP Port for BFD. The default value is the
well-known value for this port. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.25506.2.72.1.3.1.6 |
| hh3cBfdSessOperMode This variable defines current operating mode that BFD
session is running in.
The primary mode which the BFD session runs in is known as
Asynchronous mode. In this … | column | Enumeration | .1.3.6.1.4.1.25506.2.72.1.3.1.7 |
| hh3cBfdSessLocalAddr This variable defines IP address of the local interface
from which the BFD packets is transmitted.
It can also be used to enabled BFD on a specific
interface. The value is set to … | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.25506.2.72.1.3.1.9 |