h3cEponMsgTimeOut

H3C-EPON-MIB · .1.3.6.1.4.1.2011.10.2.42.1.1.3
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
Timeout waiting for a response from Optical Line Terminal(OLT)
firmware after sending it a message.
The unit is millisecond.

Context

MIB
H3C-EPON-MIB
OID
.1.3.6.1.4.1.2011.10.2.42.1.1.3
Type
scalar
Access
readwrite
Status
current
Parent
h3cEponSysMan
Siblings
21

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
h3cEponAutoAuthorize
This value determines whether software performs self-authorization for each Optical Network Unit(ONU) registering to the network. Setting it to false means for every ONU register…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.42.1.1.1
h3cEponMonitorCycleMaxVal
The upper limit of cycle which be confined to the h3cEponMonitorCycle.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.42.1.1.10
h3cEponMsgTimeOutMinVal
The lower limit of timeout which be confined to the h3cEponMsgTimeOut.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.42.1.1.11
h3cEponMsgTimeOutMaxVal
The upper limit of timeout which be confined to the h3cEponMsgTimeOut.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.42.1.1.12
h3cEponMsgLoseNumMinVal
The lower limit of time which be confined to the h3cEponMsgLoseNum.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.42.1.1.13
h3cEponMsgLoseNumMaxVal
The upper limit of time which be confined to the h3cEponMsgLoseNum.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.42.1.1.14
h3cEponSysScalarGroupnode-.1.3.6.1.4.1.2011.10.2.42.1.1.15
h3cEponSysManTable
This table defines system related parameters.
table-.1.3.6.1.4.1.2011.10.2.42.1.1.16
h3cEponAutoUpdateTable
EPON auto update ONU application configuration.
table-.1.3.6.1.4.1.2011.10.2.42.1.1.17
h3cEponOuiIndexNextTable
Next OUI index table.
table-.1.3.6.1.4.1.2011.10.2.42.1.1.18
h3cEponOuiTable
List of OUI and OAM supported by OLT.
table-.1.3.6.1.4.1.2011.10.2.42.1.1.19
h3cEponMonitorCycle
The cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch alarm and so on. Th…
scalarInteger32.1.3.6.1.4.1.2011.10.2.42.1.1.2
h3cEponMulticastControlTable
Multicast control global configuration.
table-.1.3.6.1.4.1.2011.10.2.42.1.1.20
h3cEponAuthMode
Set global auth mode, which can be combined(loid and loid-password cannot be configured at the same time). If no auth mode was set, 0 is returned.
scalarBits.1.3.6.1.4.1.2011.10.2.42.1.1.21
h3cEponOnuBindOneToOne
Enable or disable one-to-one ONU binding feature. true(1) - feature enable. false(2) - feature disable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.42.1.1.22
h3cEponMsgLoseNum
The times of messages sending timeouts, after which OLT will reset (applying to every OLT).
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.42.1.1.4
h3cEponSysHasEPONBoard
true(1) - At least an EPON board exists. false(2) - No EPON board exists.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.42.1.1.5
h3cEponMonitorCycleEnable
Stop or continue monitoring. true(1) - Continue monitoring. false(2) - Stop monitoring.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.42.1.1.6
h3cEponOltSoftwareErrAlmEnable
Software error alarm behavior of all active OLTs. true(1) - alarm enable. false(2) - alarm disable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.42.1.1.7
h3cEponPortLoopBackAlmEnable
LoopBack alarm behavior of EPON ports. true(1) - alarm enable. false(2) - alarm disable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.42.1.1.8
h3cEponMonitorCycleMinVal
The lower limit of cycle which be confined to the h3cEponMonitorCycle.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.42.1.1.9