h3cEponMonitorCycle
H3C-EPON-MIB ·
.1.3.6.1.4.1.2011.10.2.42.1.1.2
Object
scalar
r/w
Integer32
The cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch alarm and so on. The unit is second.
Context
- MIB
- H3C-EPON-MIB
- OID
.1.3.6.1.4.1.2011.10.2.42.1.1.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- h3cEponSysMan
- Siblings
- 21
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-3600
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cEponAutoAuthorize This value determines whether software performs
self-authorization for each Optical Network Unit(ONU)
registering to the network. Setting it to false
means for every ONU register… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.42.1.1.1 |
| h3cEponMonitorCycleMaxVal The upper limit of cycle which be confined to the
h3cEponMonitorCycle. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.42.1.1.10 |
| h3cEponMsgTimeOutMinVal The lower limit of timeout which be confined to the
h3cEponMsgTimeOut. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.42.1.1.11 |
| h3cEponMsgTimeOutMaxVal The upper limit of timeout which be confined to the
h3cEponMsgTimeOut. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.42.1.1.12 |
| h3cEponMsgLoseNumMinVal The lower limit of time which be confined to the
h3cEponMsgLoseNum. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.42.1.1.13 |
| h3cEponMsgLoseNumMaxVal The upper limit of time which be confined to the
h3cEponMsgLoseNum. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.42.1.1.14 |
| h3cEponSysScalarGroup | node | - | .1.3.6.1.4.1.2011.10.2.42.1.1.15 |
| h3cEponSysManTable This table defines system related parameters. | table | - | .1.3.6.1.4.1.2011.10.2.42.1.1.16 |
| h3cEponAutoUpdateTable EPON auto update ONU application configuration. | table | - | .1.3.6.1.4.1.2011.10.2.42.1.1.17 |
| h3cEponOuiIndexNextTable Next OUI index table. | table | - | .1.3.6.1.4.1.2011.10.2.42.1.1.18 |
| h3cEponOuiTable List of OUI and OAM supported by OLT. | table | - | .1.3.6.1.4.1.2011.10.2.42.1.1.19 |
| h3cEponMulticastControlTable Multicast control global configuration. | table | - | .1.3.6.1.4.1.2011.10.2.42.1.1.20 |
| h3cEponAuthMode Set global auth mode, which can be combined(loid and loid-password cannot be configured at the same time).
If no auth mode was set, 0 is returned. | scalar | Bits | .1.3.6.1.4.1.2011.10.2.42.1.1.21 |
| h3cEponOnuBindOneToOne Enable or disable one-to-one ONU binding feature.
true(1) - feature enable.
false(2) - feature disable. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.42.1.1.22 |
| h3cEponMsgTimeOut Timeout waiting for a response from Optical Line Terminal(OLT)
firmware after sending it a message.
The unit is millisecond. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.42.1.1.3 |
| h3cEponMsgLoseNum The times of messages sending timeouts, after
which OLT will reset (applying to every OLT). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.42.1.1.4 |
| h3cEponSysHasEPONBoard true(1) - At least an EPON board exists.
false(2) - No EPON board exists. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.42.1.1.5 |
| h3cEponMonitorCycleEnable Stop or continue monitoring.
true(1) - Continue monitoring.
false(2) - Stop monitoring. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.42.1.1.6 |
| h3cEponOltSoftwareErrAlmEnable Software error alarm behavior of all active OLTs.
true(1) - alarm enable.
false(2) - alarm disable. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.42.1.1.7 |
| h3cEponPortLoopBackAlmEnable LoopBack alarm behavior of EPON ports.
true(1) - alarm enable.
false(2) - alarm disable. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.42.1.1.8 |
| h3cEponMonitorCycleMinVal The lower limit of cycle which be confined to the
h3cEponMonitorCycle. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.42.1.1.9 |