h3cDot11RCRadioRate

H3C-DOT11-CFG-MIB · .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.11
MIB view Table view

Object

column r/w OctetString 
Set data transmit rates for the radio, in the format of 1,2,5.5...
For 802.11n radios, the format can be MCS X.  The data transmit rates
between AP and STA must fall into the configured rates.
(Note: For 802.11n radios, the first value will be treated as a mandatory rate,
and the second value will be treated as a supported rate.
If you configure more than two rates, the configuration cannot take effect.
If you configure only one rate, it is considered as the mandatory rate by default.)

Context

MIB
H3C-DOT11-CFG-MIB
OID
.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.11
Type
column
Access
readwrite
Status
current
Parent
h3cDot11RadioConfigEntry
Table
h3cDot11RadioConfigTable
Siblings
20

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
h3cDot11RCAPSerialID
This object represents the Serial ID of AP.
columnOctetString.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.1
h3cDot11RCRadioStatus
Represents the radio admin status whether is enabled or disabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.10
h3cDot11RCPwrAdjustStepLength
Power adjustment step-length in dBm.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.12
h3cDot11RCRadioType2
This object represents the radio will work with which 802.11 radio type.
columnH3C-DOT11-REF-MIBH3cDot11RadioType2.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.13
h3cDot11RCPreambleLenCM
This object represents whether use long or short preamble for 802.11 MAC frame. When h3cDot11CfgRadioType is either dot11b or dot11g, then value for h3cDot11PreambleLenCM will be …
columnEnumeration.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.14
h3cDot11RCDynamicChlStateCM
Enable/Disable dynamic channel selection.
columnEnumeration.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.15
h3cDot11RCRadioStatusCM
Represents the radio admin status whether is enabled or disabled.
columnEnumeration.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.16
h3cDot11RCRadioRateCM
Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format of each value can be MCS X. The data transmit rates between AP and client should…
columnOctetString.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.17
h3cDot11RCDynamicPowerStateCM
Enable/disable dynamic power selection for the band.
columnH3C-DOT11-REF-MIBH3cDot11TruthValueCM.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.18
h3cDot11RCRssiThresholdCM
Represents the minimum value of the RSSI. The clients with RSSI below this value will be refused to associate.
columndBm SNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.19
h3cDot11RCRadioID
This object represents each radio.
columnH3C-DOT11-REF-MIBH3cDot11RadioScopeType.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.2
h3cDot11RCDynamicChlStateSelfDecisiveCM
Enable/disable dynamic channel selection self decisive for the band.
columnH3C-DOT11-REF-MIBH3cDot11TruthValueCM.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.20
h3cDot11RCDynamicPowerStateSelfDecisiveCM
Enable/disable dynamic power selection self decisive for the band.
columnH3C-DOT11-REF-MIBH3cDot11TruthValueCM.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.21
h3cDot11RCRadioType
This object represents the radio will work with which 802.11 radio type.
columnH3C-DOT11-REF-MIBH3cDot11RadioType.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.3
h3cDot11RCChannel
This object represents the channel allocation of radio.
columnH3C-DOT11-REF-MIBH3cDot11ChannelScopeType.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.4
h3cDot11RCPreambleLen
This object represents whether use long or short preamble for 802.11 MAC frame. When h3cDot11CfgRadioType is either dot11b or dot11g, then value for h3cDot11PreambleLen will be va…
columnH3C-DOT11-REF-MIBH3cDot11PreambleType.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.5
h3cDot11RCPwrAttValue
This object represents the value of power attenuation.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.6
h3cDot11RCApPowerLevel
Represents the maximal transmit power scope for AP.
columndbm H3C-DOT11-REF-MIBH3cDot11TxPwrLevelScopeType.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.7
h3cDot11RCDynamicChlState
Enable/Disable dynamic channel selection.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.8
h3cDot11RCDynamicPowerState
Enable/Disable dynamic power selection for the band.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.9