h3cDot11RCApPowerLevel
H3C-DOT11-CFG-MIB ·
.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.7
Object
Represents the maximal transmit power scope for AP.
Context
- MIB
- H3C-DOT11-CFG-MIB
- OID
.1.3.6.1.4.1.2011.10.2.75.4.3.8.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Units
- dbm
- Parent
- h3cDot11RadioConfigEntry
- Table
- h3cDot11RadioConfigTable
- Siblings
- 20
Syntax
dbm H3C-DOT11-REF-MIBH3cDot11TxPwrLevelScopeType
- Source
- H3C-DOT11-REF-MIBH3cDot11TxPwrLevelScopeType
- Base type
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cDot11RCAPSerialID This object represents the Serial ID of AP. | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.1 |
| h3cDot11RCRadioStatus Represents the radio admin status whether is enabled
or disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.10 |
| h3cDot11RCRadioRate Set data transmit rates for the radio, in the format of 1,2,5.5...
For 802.11n radios, the format can be MCS X. The data transmit rates
between AP and STA must fall into the conf… | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.11 |
| h3cDot11RCPwrAdjustStepLength Power adjustment step-length in dBm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.12 |
| h3cDot11RCRadioType2 This object represents the radio will work with which 802.11 radio
type. | column | H3C-DOT11-REF-MIBH3cDot11RadioType2 | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.13 |
| h3cDot11RCPreambleLenCM This object represents whether use long or short preamble for 802.11
MAC frame.
When h3cDot11CfgRadioType is either dot11b or dot11g,
then value for h3cDot11PreambleLenCM will be … | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.14 |
| h3cDot11RCDynamicChlStateCM Enable/Disable dynamic channel selection. | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.15 |
| h3cDot11RCRadioStatusCM Represents the radio admin status whether is enabled
or disabled. | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.16 |
| h3cDot11RCRadioRateCM Set data transmit rates for the radio, in the format of 1,2,5.5...
For 802.11n radios, the format of each value can be MCS X. The data transmit
rates between AP and client should… | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.17 |
| h3cDot11RCDynamicPowerStateCM Enable/disable dynamic power selection for the band. | column | H3C-DOT11-REF-MIBH3cDot11TruthValueCM | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.18 |
| h3cDot11RCRssiThresholdCM Represents the minimum value of the RSSI.
The clients with RSSI below this value will be refused to associate. | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.19 |
| h3cDot11RCRadioID This object represents each radio. | column | H3C-DOT11-REF-MIBH3cDot11RadioScopeType | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.2 |
| h3cDot11RCDynamicChlStateSelfDecisiveCM Enable/disable dynamic channel selection self decisive for the band. | column | H3C-DOT11-REF-MIBH3cDot11TruthValueCM | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.20 |
| h3cDot11RCDynamicPowerStateSelfDecisiveCM Enable/disable dynamic power selection self decisive for the band. | column | H3C-DOT11-REF-MIBH3cDot11TruthValueCM | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.21 |
| h3cDot11RCRadioType This object represents the radio will work with which 802.11 radio
type. | column | H3C-DOT11-REF-MIBH3cDot11RadioType | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.3 |
| h3cDot11RCChannel This object represents the channel allocation of radio. | column | H3C-DOT11-REF-MIBH3cDot11ChannelScopeType | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.4 |
| h3cDot11RCPreambleLen This object represents whether use long or short preamble for 802.11
MAC frame.
When h3cDot11CfgRadioType is either dot11b or dot11g,
then value for h3cDot11PreambleLen will be va… | column | H3C-DOT11-REF-MIBH3cDot11PreambleType | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.5 |
| h3cDot11RCPwrAttValue This object represents the value of power attenuation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.6 |
| h3cDot11RCDynamicChlState Enable/Disable dynamic channel selection. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.8 |
| h3cDot11RCDynamicPowerState Enable/Disable dynamic power selection for the band. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.4.3.8.1.9 |