upsWellKnownAlarmsfirst
GEPARALLELUPS-MIB ·
.1.3.6.1.4.1.818.1.1.11.6.3
Object
node
No description available.
Context
- MIB
- GEPARALLELUPS-MIB
- OID
.1.3.6.1.4.1.818.1.1.11.6.3- Type
- node
- Parent
- upsAlarmfirst
- Siblings
- 3
- Children
- 31
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| upsAlarmsPresentfirst The present number of active alarm conditions.(*) | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.818.1.1.11.6.1 |
| upsAlarmFirstTable A list of alarm table entries. The table contains
zero, one, or many rows at any moment, depending upon
the number of alarm conditions in effect. The table
is initially empty at… | table | - | .1.3.6.1.4.1.818.1.1.11.6.2 |
| upsAlarmMaskAfirst Specifies which alarm can be handled by the UPS.
The 'Mask' parameter is a Long Integer32. The meaning
of every bit is the same as for the 'upsAlarmGroupA'
command. A bit having v… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.818.1.1.11.6.4 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| upsAlarmBatteryBadfirst One or more batteries have been determined to require
replacement.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.1 |
| upsAlarmBypassBadfirst The Bypass is out of tolerance.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.10 |
| upsAlarmOutputOffAsRequestedfirst The UPS has shutdown as requested, i.e., the output
is off.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.11 |
| upsAlarmUpsOffAsRequestedfirst The entire UPS has shutdown as commanded.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.12 |
| upsAlarmChargerFailedfirst An uncorrected problem has been detected within the
UPS charger subsystem.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.13 |
| upsAlarmUpsOutputOfffirst The output of the UPS is in the off state.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.14 |
| upsAlarmUpsSystemOfffirst The UPS system is in the off state.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.15 |
| upsAlarmFanFailurefirst The failure of one or more fans in the UPS has been
detected.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.16 |
| upsAlarmFuseFailurefirst The failure of one or more fuses has been detected.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.17 |
| upsAlarmGeneralFaultfirst A general fault in the UPS has been detected.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.18 |
| upsAlarmDiagnosticTestFailedfirst The result of the last diagnostic test indicates a
failure.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.19 |
| upsAlarmOnBatteryfirst The UPS is drawing power from the batteries.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.2 |
| upsAlarmCommunicationsLostfirst A problem has been encountered in the communications
between the agent and the UPS.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.20 |
| upsAlarmAwaitingPowerfirst The UPS output is off and the UPS is awaiting the
return of input power.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.21 |
| upsAlarmShutdownPendingfirst A upsShutdownAfterDelay countdown is underway.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.22 |
| upsAlarmShutdownImminentfirst The UPS will turn off power to the load in less than
5 seconds; this may be either a timed shutdown or a
low battery shutdown.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.23 |
| upsAlarmTestInProgressfirst A test is in progress, as initiated and indicated by
the Test Group. Tests initiated via other
implementation-specific mechanisms can indicate the
presence of the testing in the … | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.24 |
| upsAlarmReceptacleOfffirst The receptacle are switch off | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.25 |
| upsAlarmHighSpeedBusFailurefirst A problem on the High Speed Bus communication is detected | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.26 |
| upsAlarmHighSpeedBusJACRCFailurefirst A CRC failure on High Speed Bus JA is detected. | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.27 |
| upsAlarmConnectivityBusFailurefirst A problem on the Connectivity Bus communication is detected. | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.28 |
| upsAlarmHighSpeedBusJBCRCFailurefirst A CRC failure on High Speed Bus JB is detected. | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.29 |
| upsAlarmLowBatteryfirst The remaining battery run-time is less than or equal
to upsConfigLowBattTime.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.3 |
| upsAlarmCurrentSharingfirst The UPS detects an high current sharing on the parallel system. | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.30 |
| upsAlarmDCRipplefirst The UPS detects an high ripple voltage on his DC link. | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.31 |
| upsAlarmDepletedBatteryfirst The UPS will be unable to sustain the present load
when and if the utility power is lost.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.4 |
| upsAlarmTempBadfirst A temperature is out of tolerance.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.5 |
| upsAlarmInputBadfirst An input condition is out of tolerance.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.6 |
| upsAlarmOutputBadfirst An output condition (other than OutputOverload) is
out of tolerance.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.7 |
| upsAlarmOutputOverloadfirst The output load exceeds the UPS output capacity.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.8 |
| upsAlarmOnBypassfirst The Bypass is presently engaged on the UPS.(*) | node | - | .1.3.6.1.4.1.818.1.1.11.6.3.9 |