upsTrapAlarmShutdownPendingsecond
GEPARALLELUPS-MIB ·
.1.3.6.1.4.1.818.1.1.12.11.22
Object
notification
A upsShutdownAfterDelay countdown is underway.
Context
- MIB
- GEPARALLELUPS-MIB
- OID
.1.3.6.1.4.1.818.1.1.12.11.22- Type
- notification
- Status
- current
- Parent
- geUPSTrapssecond
- Siblings
- 65
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| upsTrapAlarmBatteryBadsecond One or more batteries have been determined to require
replacement. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.1 |
| upsTrapAlarmBypassBadsecond The Bypass is out of tolerance. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.10 |
| upsTrapAlarmOutputOffAsRequestedsecond The UPS has shutdown as requested, i.e., the output
is off. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.11 |
| upsTrapAlarmUpsOffAsRequestedsecond The entire UPS has shutdown as commanded. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.12 |
| upsTrapAlarmValueLowsecond A measurement value reached a value below its low-level threshold. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.129 |
| upsTrapAlarmChargerFailedsecond An uncorrected problem has been detected within the
UPS charger subsystem. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.13 |
| upsTrapAlarmValueHighsecond A measurement value reached a value higher than its high-level threshold. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.130 |
| upsTrapAlarmValueLowRestoredsecond A ValueLow alarm condition is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.133 |
| upsTrapAlarmValueHighRestoredsecond A ValueHigh alarm condition is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.134 |
| upsTrapAlarmUpsOutputOffsecond The output of the UPS is in the off state. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.14 |
| upsTrapAlarmUpsSystemOffsecond The UPS system is in the off state. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.15 |
| upsTrapAlarmFanFailuresecond The failure of one or more fans in the UPS has been
detected. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.16 |
| upsTrapAlarmFuseFailuresecond The failure of one or more fuses has been detected. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.17 |
| upsTrapAlarmGeneralFaultsecond A general fault in the UPS has been detected. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.18 |
| upsTrapAlarmDiagnosticTestFailedsecond The result of the last diagnostic test indicates a
failure. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.19 |
| upsTrapAlarmOnBatterysecond The UPS is drawing power from the batteries. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.2 |
| upsTrapAlarmCommunicationsLostsecond A problem has been encountered in the communication
between the agent and the UPS. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.20 |
| upsTrapAlarmAwaitingPowersecond The UPS output is off and the UPS is awaiting the
return of the input power (*). | notification | - | .1.3.6.1.4.1.818.1.1.12.11.21 |
| upsTrapAlarmShutdownImminentsecond The UPS will turn off power to the load in less than
5 seconds; this may be either a timed shutdown or a
low battery shutdown. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.23 |
| upsTrapAlarmTestInProgresssecond A test is in progress, as initiated and indicated by
the Test Group. Tests initiated via other
implementation-specific mechanisms can indicate the
presence of the testing in the … | notification | - | .1.3.6.1.4.1.818.1.1.12.11.24 |
| upsTrapAlarmReceptacleOffsecond A receptacle has been switched off. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.25 |
| upsTrapAlarmHighspeedBusFailuresecond A problem on the Highspeed Bus communication is detected. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.26 |
| upsTrapAlarmHighspeedBusJACRCFailuresecond A CRC failure on the Highspeed Bus JA is detected. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.27 |
| upsTrapAlarmConnectivityBusFailuresecond A problem on the Connectivity Bus communication is detected. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.28 |
| upsTrapAlarmHighspeedBusJBCRCFailuresecond A CRC failure on the Highspeed Bus JB is detected. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.29 |
| upsTrapAlarmLowBatterysecond The remaining battery run-time is less than or equal
to upsConfigLowBattTime. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.3 |
| upsTrapAlarmCurrentSharingFailuresecond An high current sharing on the parallel system is detected. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.30 |
| upsTrapAlarmDCRippleFailuresecond An high ripple voltage on his DC link is detected. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.31 |
| upsTrapAlarmBatteryBadRestoredsecond A Battery bad condition is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.33 |
| upsTrapAlarmOnBatteryRestoredsecond The UPS is drawing power from mains again. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.34 |
| upsTrapAlarmLowBatteryRestoredsecond A Low Battery condition is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.35 |
| upsTrapAlarmDepletedBatteryRestoredsecond A Depleted Battery condition is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.36 |
| upsTrapAlarmTempBadRestoredsecond A bad temperature condition is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.37 |
| upsTrapAlarmInputBadRestoredsecond An input bad condition is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.38 |
| upsTrapAlarmOutputBadRestoredsecond An output bad condition is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.39 |
| upsTrapAlarmDepletedBatterysecond The UPS will be unable to sustain the present load
when and if the utility power is lost) | notification | - | .1.3.6.1.4.1.818.1.1.12.11.4 |
| upsTrapAlarmOutputOverloadRestoredsecond An output overload condition is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.40 |
| upsTrapAlarmOnBypassRestoredsecond An On Bypass condition is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.41 |
| upsTrapAlarmBypassBadRestoredsecond A Bypass bad condition is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.42 |
| upsTrapAlarmOutputOffAsRequestedRestoredsecond A request shutdown has been restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.43 |
| upsTrapAlarmUpsOffAsRequestedRestoredsecond A entire UPS command has been restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.44 |
| upsTrapAlarmChargerFailedRestoredsecond A Charger Failer condition is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.45 |
| upsTrapAlarmUpsOutputOnsecond The output of the UPS switched in the on state. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.46 |
| upsTrapAlarmUpsSystemOnsecond The UPS system is switched in the on state. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.47 |
| upsTrapAlarmFanFailureRestoredsecond A Fan failure condition is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.48 |
| upsTrapAlarmFuseFailureRestoredsecond A Fuse failure condition is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.49 |
| upsTrapAlarmTempBadsecond A temperature is out of tolerance. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.5 |
| upsTrapAlarmGeneralFaultRestoredsecond A general fault is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.50 |
| upsTrapAlarmDiagnosticTestFailedRestoredsecond A last diagnostic test indicates a failure is
restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.51 |
| upsTrapAlarmCommunicationsLostRestoredsecond A problem in the communication between the agent
and the UPS is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.52 |
| upsTrapAlarmAwaitingPowerRestoredsecond A awaiting power condition is restored (*). | notification | - | .1.3.6.1.4.1.818.1.1.12.11.53 |
| upsTrapAlarmShutdownPendingRestoredsecond A upsShutdownAfterDelay countdown is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.54 |
| upsTrapAlarmShutdownImminentRestoredsecond A shutdown imminent condition is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.55 |
| upsTrapAlarmTestInProgressRestoredsecond The test is in progress is terminated. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.56 |
| upsTrapAlarmReceptacleOnsecond A receptacle has been switched on. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.57 |
| upsTrapAlarmHighspeedBusRestoredsecond A problem on the Highspeed Bus communication is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.58 |
| upsTrapAlarmHighspeedBusJACRCRestoredsecond A CRC failure on the Highspeed Bus JA is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.59 |
| upsTrapAlarmInputBadsecond An input condition is out of tolerance. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.6 |
| upsTrapAlarmConnectivityBusRestoredsecond A problem on the Connectivity Bus communication is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.60 |
| upsTrapAlarmHighspeedBusJBCRCRestoredsecond A CRC failure on the Highspeed Bus JB is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.61 |
| upsTrapAlarmCurrentSharingRestoredsecond An high current sharing on the parallel system is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.62 |
| upsTrapAlarmDCRippleRestoredsecond An high ripple voltage on his DC link is restored. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.63 |
| upsTrapAlarmOutputBadsecond An output condition (other than OutputOverload) is
out of tolerance. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.7 |
| upsTrapAlarmOutputOverloadsecond The output load exceeds the UPS output capacity. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.8 |
| upsTrapAlarmOnBypasssecond The Bypass is presently engaged on the UPS. | notification | - | .1.3.6.1.4.1.818.1.1.12.11.9 |