upsEventThirdTable

GEPARALLELUPS-MIB · .1.3.6.1.4.1.818.1.1.13.10.6

Object

table

A list of event table entries.  The number of entries is always
10, and the value of upsEventTableSize gives the number of valid
entries from the begging of the table.  Invalid entries return 0.
          
To prevent problems with simultaneous queries from several agents,
these values MUST be accessed using several PDUs in the
same SNMP message (<number> is (1..10)):
          
PDU-SET upsSetStartingTimeStamp <time> 
PDU-SET upsEventGetNext <number>
PDU-GET upsEventTableSize
PDU-GET upsEventCode,upsEventStatus,upsEventTime 1
PDU-GET upsEventCode,upsEventStatus,upsEventTime 2
..
PDU-GET upsEventCode,upsEventStatus,upsEventTime <number>
          
The table is read up to requested number of events and the
management software afterwards decides which entries are
valid, as indicated by the upsEventTableSize.

Context

MIB: GEPARALLELUPS-MIB
OID: .1.3.6.1.4.1.818.1.1.13.10.6
Type: table
Status: current
Parent: upsGetSetthird
Siblings: 23
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
upsEventGetNextthird The number of events to retreive from the UPS event buffer. When this object is set the EventTable will be filled with the requested number of entries. The value upsEventSetStarti…	scalar	PositiveInteger32	`.1.3.6.1.4.1.818.1.1.13.10.1`
upsParameterTableSizethird The number of entries in the parameter table. This object indicates the number of rows in the parameter table.	scalar	NonNegativeInteger32	`.1.3.6.1.4.1.818.1.1.13.10.10`
upsParameterThirdTable A list of parameter entries. The number of entries is always 16, and the value of upsParameterTableSize gives the number of valid entries from the begging of the table. Invalid en…	table	-	`.1.3.6.1.4.1.818.1.1.13.10.11`
upsStatusthird The global UPS status is returned. Every bit reflects a specific status condition. Unused bits returns as 0. The status value can also be found on other commands. The value SNMP…	scalar	NonNegativeInteger32	`.1.3.6.1.4.1.818.1.1.13.10.12`
upsMainsStatisticsMBfailthird Count of main bypass failures (>200 ms), since UPS installation.	scalar	NonNegativeInteger32	`.1.3.6.1.4.1.818.1.1.13.10.13`
upsMainsStatisticsMRfailthird Count of mains rectifier failures (>200 ms), since UPS installation.	scalar	NonNegativeInteger32	`.1.3.6.1.4.1.818.1.1.13.10.14`
upsMainsStatisticsB2third Count of transients on the mains bypass (0..2 ms), during the last 7 days.	scalar	NonNegativeInteger32	`.1.3.6.1.4.1.818.1.1.13.10.15`
upsMainsStatisticsB5third Count of transients on the mains bypass (2..5 ms), during the last 7 days.	scalar	NonNegativeInteger32	`.1.3.6.1.4.1.818.1.1.13.10.16`
upsMainsStatisticsB10third Count of transients on the mains bypass (5..10 ms), during the last 7 days.	scalar	NonNegativeInteger32	`.1.3.6.1.4.1.818.1.1.13.10.17`
upsMainsStatisticsB200third Count of transients on the mains bypass (10..200 ms), during the last 7 days.	scalar	NonNegativeInteger32	`.1.3.6.1.4.1.818.1.1.13.10.18`
upsMainsStatisticsBypRelthird Bypass reliability degree [0..100%;255]. The value NOSUCHNAME means 'not available'.	scalar	NonNegativeInteger32	`.1.3.6.1.4.1.818.1.1.13.10.19`
upsEventGetPreviousthird The number of events to retreive from the UPS event buffer. When this object is set the EventTable will be filled with the requested number of entries. The value upsEventLastTime …	scalar	PositiveInteger32	`.1.3.6.1.4.1.818.1.1.13.10.2`
upsTimethird The current timestamp (or real-time) of the UPS. For the format, see 'Timestamp' specifications. The write-command has to comply with the correct timestamp format expected by th…	scalar	NonNegativeInteger32	`.1.3.6.1.4.1.818.1.1.13.10.20`
upsRequestPermissionthird An encrypted code is send to enable use of restricted write objects during a limited period of time.	scalar	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.818.1.1.13.10.21`
upsEventGetCodethird The code which is used as starting point to downloading the events from the UPS event buffer.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.818.1.1.13.10.22`
upsEventSpinLockthird A spin lock on the event subsystem.	scalar	SNMPv2-TCTestAndIncr	`.1.3.6.1.4.1.818.1.1.13.10.23`
upsParameterSpinLockthird A spin lock on the parameters subsystem.	scalar	SNMPv2-TCTestAndIncr	`.1.3.6.1.4.1.818.1.1.13.10.24`
upsEventSetStartingTimeStampthird The timestamp which is used as starting point for downloading events from the UPS event buffer	scalar	NonNegativeInteger32	`.1.3.6.1.4.1.818.1.1.13.10.3`
upsEventRetreiveCurrentTimeStampthird The current timestamp is retreived from the UPS	scalar	NonNegativeInteger32	`.1.3.6.1.4.1.818.1.1.13.10.4`
upsEventTableSizethird The number of entries in the event table. This object indicates the number of rows in the event table.	scalar	NonNegativeInteger32	`.1.3.6.1.4.1.818.1.1.13.10.5`
upsParametersReadthird The number of parameters to retreive from the UPS. When this object is set the ParameterTable will be filled with the requested number of entries. The value upsParametersStartAddr…	scalar	PositiveInteger32	`.1.3.6.1.4.1.818.1.1.13.10.7`
upsParametersWritethird The number of parameters to write to the UPS. When this object is set the ParameterTable will be send to the ups. The value upsParametersStartAddress will be used for the third v…	scalar	PositiveInteger32	`.1.3.6.1.4.1.818.1.1.13.10.8`
upsParametersStartAddressthird The address which is used as starting point for downloading parameters from the UPS	scalar	NonNegativeInteger32	`.1.3.6.1.4.1.818.1.1.13.10.9`

Child Objects