upsEventRetreiveCurrentTimeStampseventh
GEPARALLELUPS-MIB ·
.1.3.6.1.4.1.818.1.1.17.10.4
Object
scalar
NonNegativeInteger32
The current timestamp is retreived from the UPS
Context
- MIB
- GEPARALLELUPS-MIB
- OID
.1.3.6.1.4.1.818.1.1.17.10.4- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- upsGetSetseventh
- Siblings
- 23
Syntax
NonNegativeInteger32
- Source
- NonNegativeInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| upsEventGetNextseventh The number of events to retreive from the UPS event buffer.
When this object is set the EventTable will be filled with the
requested number of entries. The value upsEventSetStarti… | scalar | PositiveInteger32 | .1.3.6.1.4.1.818.1.1.17.10.1 |
| upsParameterTableSizeseventh The number of entries in the parameter table.
This object indicates the number of rows in the parameter table. | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.17.10.10 |
| upsParameterSeventhTable A list of parameter entries. The number of entries is always
16, and the value of upsParameterTableSize gives the number of valid
entries from the begging of the table. Invalid en… | table | - | .1.3.6.1.4.1.818.1.1.17.10.11 |
| upsStatusseventh The global UPS status is returned. Every bit reflects a specific
status condition. Unused bits returns as 0. The status value can
also be found on other commands. The value SNMP… | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.17.10.12 |
| upsMainsStatisticsMBfailseventh Count of main bypass failures (>200 ms), since UPS installation. | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.17.10.13 |
| upsMainsStatisticsMRfailseventh Count of mains rectifier failures (>200 ms), since UPS installation. | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.17.10.14 |
| upsMainsStatisticsB2seventh Count of transients on the mains bypass (0..2 ms), during the last 7 days. | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.17.10.15 |
| upsMainsStatisticsB5seventh Count of transients on the mains bypass (2..5 ms), during the last 7 days. | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.17.10.16 |
| upsMainsStatisticsB10seventh Count of transients on the mains bypass (5..10 ms), during the last 7 days. | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.17.10.17 |
| upsMainsStatisticsB200seventh Count of transients on the mains bypass (10..200 ms), during the last 7 days. | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.17.10.18 |
| upsMainsStatisticsBypRelseventh Bypass reliability degree [0..100%;255]. The value NOSUCHNAME means 'not available'. | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.17.10.19 |
| upsEventGetPreviousseventh The number of events to retreive from the UPS event buffer.
When this object is set the EventTable will be filled with the
requested number of entries. The value upsEventLastTime … | scalar | PositiveInteger32 | .1.3.6.1.4.1.818.1.1.17.10.2 |
| upsTimeseventh The current timestamp (or real-time) of the UPS. For the format,
see 'Timestamp' specifications. The write-command has to comply with the
correct timestamp format expected by th… | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.17.10.20 |
| upsRequestPermissionseventh An encrypted code is send to enable use of restricted write objects during
a limited period of time. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.818.1.1.17.10.21 |
| upsEventGetCodeseventh The code which is used as starting point to downloading the events from the
UPS event buffer. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.818.1.1.17.10.22 |
| upsEventSpinLockseventh A spin lock on the event subsystem. | scalar | SNMPv2-TCTestAndIncr | .1.3.6.1.4.1.818.1.1.17.10.23 |
| upsParameterSpinLockseventh A spin lock on the parameters subsystem. | scalar | SNMPv2-TCTestAndIncr | .1.3.6.1.4.1.818.1.1.17.10.24 |
| upsEventSetStartingTimeStampseventh The timestamp which is used as starting point for downloading
events from the UPS event buffer | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.17.10.3 |
| upsEventTableSizeseventh The number of entries in the event table.
This object indicates the number of rows in the event table. | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.17.10.5 |
| upsEventSeventhTable A list of event table entries. The number of entries is always
10, and the value of upsEventTableSize gives the number of valid
entries from the begging of the table. Invalid en… | table | - | .1.3.6.1.4.1.818.1.1.17.10.6 |
| upsParametersReadseventh The number of parameters to retreive from the UPS.
When this object is set the ParameterTable will be filled with the
requested number of entries. The value upsParametersStartAddr… | scalar | PositiveInteger32 | .1.3.6.1.4.1.818.1.1.17.10.7 |
| upsParametersWriteseventh The number of parameters to write to the UPS.
When this object is set the ParameterTable will be send to the ups.
The value upsParametersStartAddress will be used for the seventh… | scalar | PositiveInteger32 | .1.3.6.1.4.1.818.1.1.17.10.8 |
| upsParametersStartAddressseventh The address which is used as starting point for downloading
parameters from the UPS | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.17.10.9 |