cmgHardwareStatusMask
G700-MG-MIB ·
.1.3.6.1.4.1.6889.2.9.1.1.10.13
Object
scalar
OctetString
Each bit of this value set to '1' indicates a specific status
condition in the module.
Octets are numbered in the order in which they appear in the PDU.
Bits are numbered from the most-significant leftmost bit in the
octet (bit 0) to the least-significant rightmost bit (bit 7).
Cajun numbering continues across octets, so that octet 1 bit 0 is
called bit 8 in the Cajun scheme. That number is also shown below,
with the octet value for each single bit set.
Octet 0 high-order 4 bits show LED status.
Octet 0 low-order 4 bits show ICC status.
Octets 1 - 5 show power-on self test (POST) results.
Cajun Octet Octet
bit# bit# value Meaning
----- ----- ----- -------
0 0/0 0x80 Media gateway red LED is on.
1 0/1 0x40 The red LED is on in one or more of the media modules.
2-3 0/2-3 Unused.
4 0/4 0x08 Integrated Communications Controller hardware watchdog
alert is on.
5-7 0/5-7 Unused.
8 1/0 0x80 POST HDLC local loopback failed.
9 1/1 0x40 POST Ethernet local loopback failed.
10 1/2 0x20 POST Ethernet physical local loopback failed.
11 1/3 0x10 POST Port I/O read-write test failed.
12-15 1/4-7 Unused.
16 2/0 0x80 POST NCE0 reset failed.
17 2/1 0x40 POST NCE0 internal RAM test failed.
18 2/2 0x20 POST NCE0 FIFO loop-around failed.
19 2/3 0x10 POST NCE0 internal channel loopback failed.
20 2/4 0x08 POST NCE0 internal TDM loopback failed.
21 2/5 0x04 POST NCE0 external channel loopback failed.
22-23 2/6-7 Unused.
24 3/0 0x80 POST NCE1 reset failed.
25 3/1 0x40 POST NCE1 internal RAM test failed.
26 3/2 0x20 POST NCE1 FIFO loop-around failed.
27 3/3 0x10 POST NCE1 internal channel loopback failed.
28 3/4 0x08 POST NCE1 internal TDM loopback failed.
29 3/5 0x04 POST NCE1 external channel loopback failed.
30-31 3/6-7 Unused.
32 4/0 0x80 POST DSP reset failed.
33 4/1 0x40 POST POST SPI internal loopback failed.
34 4/2 0x20 POST Spitfire FIFO test failed.
35 4/3 0x10 POST ADC test failed.
36 4/4 0x08 POST CPLD access test failed.
37-39 4/5-7 Unused.
40-47 5/0-7 Unused.
Context
- MIB
- G700-MG-MIB
- OID
.1.3.6.1.4.1.6889.2.9.1.1.10.13- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- cmgHardware
- Siblings
- 13
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmgCpuTemp Reading of the internal temperature sensor at the CPU,
expressed in degrees Celsius. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.9.1.1.10.1 |
| cmgPowerDsp Voltage reading in millivolts at the power supply serving the DSP
units, derived from VoIP complex power. Nominal value is +1580 mV.
If the reading falls outside the range 1530 t… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.9.1.1.10.10 |
| cmgPower8260 Voltage reading in millivolts at the power supply serving the 8260
processor, derived from VoIP complex power. Nominal value is +2500
mV. If the reading falls outside the range … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.9.1.1.10.11 |
| cmgHardwareFaultMask Each bit of this value set to '1' indicates a specific fault
in the module.
Octets are numbered in the order in which they appear in the PDU.
Bits are numbered from the… | scalar | OctetString | .1.3.6.1.4.1.6889.2.9.1.1.10.12 |
| cmgHardwareFanLowSpeedLevel The fan speed level mode. Disable(2) is used for normal operation of two fan speeds.
Enable(1) is used to activate additional lower speed level.
Default is disable(2). | scalar | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.10.14 |
| cmgCpuTempWarningThresh Internal enclosure temperature warning threshold, expressed in degrees
Celsius. When the temperature at the CPU sensor exceeds the threshold,
a trap is sent to the management con… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.9.1.1.10.2 |
| cmgCpuTempShutdownThresh Internal enclosure temperature shutdown threshold, expressed in degrees
Celsius. When the temperature at the CPU sensor exceeds the threshold,
a trap is sent to the management co… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.9.1.1.10.3 |
| cmgDspTemp Reading of the internal temperature sensor at the DSPs,
expressed in degrees Celsius. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.9.1.1.10.4 |
| cmgDspTempWarningThresh Internal enclosure temperature warning threshold, expressed in degrees
Celsius. When the temperature at the DSP sensor exceeds the threshold,
a trap is sent to the management con… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.9.1.1.10.5 |
| cmgDspTempShutdownThresh Internal enclosure temperature shutdown threshold, expressed in degrees
Celsius. When the temperature at the DSP sensor exceeds the threshold,
a trap is sent to the management co… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.9.1.1.10.6 |
| cmgPowerMgProcessor Voltage reading in millivolts at the power supply serving the Media
Gateway main processor. Nominal value is +5100 mV. If the reading
falls outside the range 4950 to 5250 mV, a … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.9.1.1.10.7 |
| cmgPowerMediaModules Voltage reading in millivolts at the power supply serving the Media
Modules. Nominal value is -48000 mV. If the reading falls outside
the range -43000 to -53000 mV, a trap is se… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.9.1.1.10.8 |
| cmgPowerVoipComplex Voltage reading in millivolts at the power supply serving the VoIP
complexes. Nominal value is +3400 mV. If the reading falls outside
the range 3200 to 3600 mV, a trap is sent t… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6889.2.9.1.1.10.9 |