cmgHardwareFaultMask

Each bit of this value set to '1' indicates a specific fault
in the module.
          
Octets are numbered in the order in which they appear in the PDU.
Bits are numbered from the most-significant leftmost bit in the
octet (bit 0) to the least-significant rightmost bit (bit 7).
          
Cajun numbering continues across octets, so that octet 1 bit 0 is
called bit 8 in the Cajun scheme.  That number is also shown below,
with the octet value for each single bit set.
          
Octet 0 high-order 4 bits show fan status.
Octet 0 low-order 4 bits show temperature status.
Octet 1 shows power supply status.
Octet 2 shows other alarms.
          
Cajun  Octet Octet
bit#   /bit# value	Meaning
-----  ----- -----	-------
0      0/0   0x80	Multiple fan warning: at least two fans have been operating
		at less than 90% of their nominal speed for 5 minutes or
		more.  This may be an early warning of overheating.
          
1      0/1   0x40	PSU fan brief failure warning: the power supply fan has been
		operating at less than 90% of its nominal speed for 10 minutes
		or more, but less than 15 minutes.  This may be an early
		warning of overheating.
          
2      0/2   0x20	PSU fan prolonged failure warning: the power supply fan has
		been operating at less than 90% of its nominal speed for 15
		minutes or more.  This may be an early warning of overheating.
          
3      0/3       	Unused.
          
4      0/4   0x08	Temperature warning: cmgCpuTemp has exceeded its warning
		threshold.
          
5      0/5   0x04	Temperature warning: cmgDspTemp has exceeded its warning
		threshold.
          
6     0/6	Unused.
          
7     0/7   Power On Status Test failure -NCE, QUICC test failures on power up
          
8      1/0   0x80	The +5.1 v power supply to the MG processor is out of range.
9      1/1   0x40	The -48 v power supply to the media modules is out of range.
10      1/2   0x20	The +3.3 v power supply to the VoIP complexes is out of range.
11      1/3   0x10	The +1.58 v power supply to the DSP units is out of range.
12      1/4   0x08	The +2.5 v power supply to the 8260 processor is out of range.
13      1/5   0x04	The -48 v auxiliary power supply to the endpoints is out of
		range.
14      1/6   0x02	The +12 v power supply to the fans is out of range.
15      1/7		Unused.
          
16      2/0   0x80	Clock synchronization signal is lost.
17      2/1   0x40	Clock synchronization signal warning. Only one clock
               syncronization signal source remains.
18      2/2   0x20   Clock synchronization signal excessive switching.
19      2/3   0x10   TDM Test Expansion Box 1 Failure
20      2/4   0x08   TDM Test Expansion Box 2 Failure
21      2/5   0x04   PoE Power Supply Base Box Failure
22      2/6   0x02   PoE Power Supply Expansion Box 1 Failure
23      2/7   0x01   PoE Power Supply Expansion Box 2 Failure

MIB

G700-MG-MIB

OID

.1.3.6.1.4.1.6889.2.9.1.1.10.12

Type

scalar

Access

readonly

Status

current

Parent

cmgHardware

Siblings

13