systemTemperature

G6-SYSTEM-MIB · .1.3.6.1.4.1.3181.10.6.1.30.104
MIB view Table view

Object

scalar Integer32 
Temperature value in centigrade.

Context

MIB
G6-SYSTEM-MIB
OID
.1.3.6.1.4.1.3181.10.6.1.30.104
Type
scalar
Access
readonly
Status
current
Parent
system
Siblings
24

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
systemShowTimeDate
Show system time and date.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.30.1
systemInventory
Inventory string free for customer use. Up to 512 character are accepted. Note this config is linked to the SD card and may change when config or SD card is exchanged. For an inve…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.30.10
systemLastBootTime
The time and date when this device has booted.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.30.100
systemUptime
Uptime since last reboot in seconds.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.3181.10.6.1.30.101
systemUsedMacAddress
Contains the mac address used by this unit. Usually follows to MAC defined in the factory setting, but may be overwritten by the alternative_mac_address.
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.3181.10.6.1.30.102
systemUsedBootMediascalarEnumeration.1.3.6.1.4.1.3181.10.6.1.30.103
systemClimateLevel
Annotated temperature level.
scalarEnumeration.1.3.6.1.4.1.3181.10.6.1.30.105
firmwareTable
This section provides details about the running firmware.
table-.1.3.6.1.4.1.3181.10.6.1.30.106
saveInfoTable
This section provided status information about the internal parameter saving process.
table-.1.3.6.1.4.1.3181.10.6.1.30.107
systemAutorunCliScript
Optional cli scripts executed after power sequence is completed. Several scripts may be assigned, with comma or blank separation.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.30.11
systemSerialPort
When set to DISABLED the local serial console port is disabled. Local access via serial cable is blocked. While this enhances local protection it also closes the emergency access …
scalarEnumeration.1.3.6.1.4.1.3181.10.6.1.30.12
systemPermitDebugAccess
When enabled it is possible to log into the system for debug purposes. This includes telnet/ssh, as well as web and file transfer protocols. To protect the system from unauthorize…
scalarEnumeration.1.3.6.1.4.1.3181.10.6.1.30.13
systemPermitIncomingAlerts
When enabled it is possible receive alerts via from external devices via SNMP or HTTP(S). This feature may be used in combination with custom scripting to react to external events…
scalarEnumeration.1.3.6.1.4.1.3181.10.6.1.30.14
systemCharacterSet
This parameter can be set to support languages with characters not found the normal Western European character set. Be sure to set your CLI terminal to the matching setting.
scalarEnumeration.1.3.6.1.4.1.3181.10.6.1.30.15
systemConfigurationSaveMode
In most cases the configuration of the device should be permanently saved and automatically be applied after a power up. In some cases, however, where public acces to the device i…
scalarEnumeration.1.3.6.1.4.1.3181.10.6.1.30.16
scriptScheduleTable
This dynamic table permits the setup of automated script execution based on precise time scheduling definition. Any number of scripts may be executed at any desired interval or at…
table-.1.3.6.1.4.1.3181.10.6.1.30.17
systemSetTime
Sets the system clock (time only). Syntax: 12:30:00
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.30.2
systemSetDate
Sets the system clock (date only). Syntax: 2012-12-24
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.30.3
systemShowUtilization
Show CPU status information
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.30.4
systemRebootDevice
This command will restart the device. All communication will be disrupted! Syntax: reboot_device = CONFIRM.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.30.5
systemCreateSnapshot
Creates a snapshot of all relevant configuration and status information packaged as a single tar archieve. This file can be found in service/snapshot.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.30.6
systemSendWakeOnLanPacket
This command will send a magic packet to wake up a selected sleeping device. The device is identified by its MAC address. Syntax: send_wake_on_lan_packet = 00:11:22:44:55:66.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.30.7
systemAlternativeMacAddress
This field is usually empty. This field may be used to override the MAC address fixed in the factory setting. NOTE: This value is only activated after a reset!
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.3181.10.6.1.30.8
systemBootPreference
This feature only applies to devices that feature internal memory plus plugged-in SD cards. It defines which software is used after reboot.
scalarEnumeration.1.3.6.1.4.1.3181.10.6.1.30.9