systemBootPreference
G6-SYSTEM-MIB ·
.1.3.6.1.4.1.3181.10.6.1.30.9
Object
scalar
r/w
Enumeration
This feature only applies to devices that feature internal memory plus plugged-in SD cards. It defines which software is used after reboot.
Context
- MIB
- G6-SYSTEM-MIB
- OID
.1.3.6.1.4.1.3181.10.6.1.30.9- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- system
- Siblings
- 24
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | sdCardFirst |
1 | internalFirst |
2 | sdCardOnly |
3 | internalOnly |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| systemShowTimeDate Show system time and date. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.30.1 |
| systemInventory Inventory string free for customer use. Up to 512 character are accepted. Note this config is linked to the SD card and may change when config or SD card is exchanged. For an inve… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.30.10 |
| systemLastBootTime The time and date when this device has booted. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.30.100 |
| systemUptime Uptime since last reboot in seconds. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3181.10.6.1.30.101 |
| systemUsedMacAddress Contains the mac address used by this unit. Usually follows to MAC defined in the factory setting, but may be overwritten by the alternative_mac_address. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3181.10.6.1.30.102 |
| systemUsedBootMedia | scalar | Enumeration | .1.3.6.1.4.1.3181.10.6.1.30.103 |
| systemTemperature Temperature value in centigrade. | scalar | Integer32 | .1.3.6.1.4.1.3181.10.6.1.30.104 |
| systemClimateLevel Annotated temperature level. | scalar | Enumeration | .1.3.6.1.4.1.3181.10.6.1.30.105 |
| firmwareTable This section provides details about the running firmware. | table | - | .1.3.6.1.4.1.3181.10.6.1.30.106 |
| saveInfoTable This section provided status information about the internal parameter saving process. | table | - | .1.3.6.1.4.1.3181.10.6.1.30.107 |
| systemAutorunCliScript Optional cli scripts executed after power sequence is completed. Several scripts may be assigned, with comma or blank separation. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.30.11 |
| systemSerialPort When set to DISABLED the local serial console port is disabled. Local access via serial cable is blocked. While this enhances local protection it also closes the emergency access … | scalar | Enumeration | .1.3.6.1.4.1.3181.10.6.1.30.12 |
| systemPermitDebugAccess When enabled it is possible to log into the system for debug purposes. This includes telnet/ssh, as well as web and file transfer protocols. To protect the system from unauthorize… | scalar | Enumeration | .1.3.6.1.4.1.3181.10.6.1.30.13 |
| systemPermitIncomingAlerts When enabled it is possible receive alerts via from external devices via SNMP or HTTP(S). This feature may be used in combination with custom scripting to react to external events… | scalar | Enumeration | .1.3.6.1.4.1.3181.10.6.1.30.14 |
| systemCharacterSet This parameter can be set to support languages with characters not found the normal Western European character set. Be sure to set your CLI terminal to the matching setting. | scalar | Enumeration | .1.3.6.1.4.1.3181.10.6.1.30.15 |
| systemConfigurationSaveMode In most cases the configuration of the device should be permanently saved and automatically be applied after a power up. In some cases, however, where public acces to the device i… | scalar | Enumeration | .1.3.6.1.4.1.3181.10.6.1.30.16 |
| scriptScheduleTable This dynamic table permits the setup of automated script execution based on precise time scheduling definition. Any number of scripts may be executed at any desired interval or at… | table | - | .1.3.6.1.4.1.3181.10.6.1.30.17 |
| systemSetTime Sets the system clock (time only). Syntax: 12:30:00 | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.30.2 |
| systemSetDate Sets the system clock (date only). Syntax: 2012-12-24 | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.30.3 |
| systemShowUtilization Show CPU status information | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.30.4 |
| systemRebootDevice This command will restart the device. All communication will be disrupted! Syntax: reboot_device = CONFIRM. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.30.5 |
| systemCreateSnapshot Creates a snapshot of all relevant configuration and status information packaged as a single tar archieve. This file can be found in service/snapshot. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.30.6 |
| systemSendWakeOnLanPacket This command will send a magic packet to wake up a selected sleeping device. The device is identified by its MAC address. Syntax: send_wake_on_lan_packet = 00:11:22:44:55:66. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.30.7 |
| systemAlternativeMacAddress This field is usually empty. This field may be used to override the MAC address fixed in the factory setting. NOTE: This value is only activated after a reset! | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3181.10.6.1.30.8 |