moduleControlLedTest

G6-MSP1000-MIB · .1.3.6.1.4.1.3181.10.6.1.94.12.1.10
MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
This will start the modules LED test and will return the LED back up automatic mode after a few seconds. May be also be used to identify a certain module.

Context

MIB
G6-MSP1000-MIB
OID
.1.3.6.1.4.1.3181.10.6.1.94.12.1.10
Type
column
Access
readwrite
Status
current
Parent
moduleControlEntry
Table
moduleControlTable
Siblings
17

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
moduleControlIndex
Automatically generated
columnInteger32.1.3.6.1.4.1.3181.10.6.1.94.12.1.1
moduleControlLoopOff
Turns all loops off
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.94.12.1.11
moduleControlLoopPort1
Tries to engage a loop at port 1. Note not all modules support loops. View port status to check success.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.94.12.1.12
moduleControlLoopPort2
Tries to engage a loop at port 2. Note not all modules support loops. View port status to check success.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.94.12.1.13
moduleControlLoopPort3
Tries to engage a loop at port 3. Note not all modules support loops. View port status to check success.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.94.12.1.14
moduleControlLoopPort4
Tries to engage a loop at port 4. Note not all modules support loops. View port status to check success.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.94.12.1.15
moduleControlBertRestart
Resynchronizes BERT. Only has an effect if a BERT is available on the module and configured to be active.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.94.12.1.16
moduleControlBertInsertError
Inserts an error in the data pattern. This can be used to confirm that a BERT is actually operating. Only has an effect if a BERT is available on the module and configured to be a…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.94.12.1.17
moduleControlBertClearCounter
Clears the BERT counter. Only has an effect if a BERT is available on the module and configured to be active.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.94.12.1.18
moduleControlEnterPassword
This command will set the module password. Only required when the nms_operation_mode is set to passive mode. Enter the password before configuration or actions can be accepted by …
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.94.12.1.2
moduleControlRebootModule
This command will restart the module. All communication will be disrupted! Syntax: reboot_module = CONFIRM.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.94.12.1.3
moduleControlWarmStart
This command will warm start the module. Communication shall not be disrupted. (Firmware dependend) Syntax: warm_start = CONFIRM.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.94.12.1.4
moduleControlClearCounter
This command will clear all module and port related statistics counter.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.94.12.1.5
moduleControlSwitchOffBackup
For a module that supports backup and which currently is in backup condition this command will revert to normal operation. If this would disrupt traffic a warning is returned and …
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.94.12.1.6
moduleControlSwitchToBackup
For a module that supports backup this command will switch to the backup link. If this would disrupt traffic because backup link is not available a warning is returned and nothing…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.94.12.1.7
moduleControlAutomaticBackup
This command returns a manually overridden backup module to normal automatic mode. No parameter are required.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.94.12.1.8
moduleControlWriteDisplay
Writes to the front panel display of the module. Only for modules that offer a front panel display.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.94.12.1.9