futOspfDefaultPassiveInterface
FUTURESOFT-OSPF-MIB ·
.1.3.6.1.4.1.2076.10.1.16
Object
When set to true all OSPF interfaces created after this setting will be passive interfaces. If set to false OSPF interfaces created after this setting will not be passive.
Context
- MIB
- FUTURESOFT-OSPF-MIB
- OID
.1.3.6.1.4.1.2076.10.1.16- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- futospfGeneralGroup
- Siblings
- 39
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| futOspfOverFlowState Indicates whether router is in overflow state or not. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.10.1.1 |
| futOspfMaxRoutes deprecated This gives the maximum number of routing table entries. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.10.1.10 |
| futOspfMaxLsaSize deprecated This specifies the maximum size of the LSA. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.10.1.11 |
| futOspfTraceLevel This object is used to define level of trace required for OSPF.
Levels are defined as follows.
0x00000100 -- Packet High Level Dump Trace.
0x00000200 -- Packet Low Level Dump Tra… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.10.1.12 |
| futOspfMinLsaInterval The minimum time between distinct originations of any particular LSA. | scalar | Integer32 | .1.3.6.1.4.1.2076.10.1.13 |
| futOspfABRType Different Types of ABRs supported | scalar | Enumeration | .1.3.6.1.4.1.2076.10.1.14 |
| futOspfNssaAsbrDefRtTrans Specifies the P-Bit setting for the default Type-7
LSA generated by ASBR(which is not ABR).When set
disabled, P-Bit is clear in the generated default Lsa.
When set to enabled, P-… | scalar | Enumeration | .1.3.6.1.4.1.2076.10.1.15 |
| futOspfSpfHoldtime Minimum time between two consecutive SPF calculations.
Time is configured in milli seconds | scalar | Integer32 | .1.3.6.1.4.1.2076.10.1.17 |
| futOspfSpfDelay The Delay at which routing calculation is carried after a topology change.
Time is configured in milli seconds | scalar | Integer32 | .1.3.6.1.4.1.2076.10.1.18 |
| futOspfRestartSupport The router.s support for OSPF graceful restart.
Options include: no restart support, only planned
restarts, or both planned and unplanned restarts.
This object is persi… | scalar | Enumeration | .1.3.6.1.4.1.2076.10.1.19 |
| futOspfPktsRcvd This gives the Total no. of Packets received. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.10.1.2 |
| futOspfRestartInterval Configured OSPF graceful restart timeout interval.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage. | scalar | Integer32 | .1.3.6.1.4.1.2076.10.1.20 |
| futOspfRestartStrictLsaChecking Indicates if strict LSA checking is enabled for
graceful restart.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.10.1.21 |
| futOspfRestartStatus Current status of OSPF graceful restart. | scalar | Enumeration | .1.3.6.1.4.1.2076.10.1.22 |
| futOspfRestartAge Remaining time in current OSPF graceful restart
interval. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.10.1.23 |
| futOspfRestartExitReason Describes the outcome of the last attempt at a
graceful restart. If the value is 'none', no restart
has yet been attempted. If the value is 'inProgress',
a restart attempt is curr… | scalar | Enumeration | .1.3.6.1.4.1.2076.10.1.24 |
| futOspfHelperSupport The router.s helper support for OSPF graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
futOspfHelperSupport is indicated by bitmap.
… | scalar | Bits | .1.3.6.1.4.1.2076.10.1.25 |
| futOspfHelperGraceTimeLimit Configured OSPF graceful restart interval limit in helper side.
Time is configured in seconds
This object is persistent and when written the entity
SHOULD save the cha… | scalar | Integer32 | .1.3.6.1.4.1.2076.10.1.26 |
| futOspfRestartAckState Indicates Reception required / not-required . whether GraceLSAs
sent by this router are expected to be acknowledged by peers.
This object is persistent and when writt… | scalar | Enumeration | .1.3.6.1.4.1.2076.10.1.27 |
| futOspfGraceLsaRetransmitCount Number of retransmissions for unacknowledged GraceLSAs | scalar | Integer32 | .1.3.6.1.4.1.2076.10.1.28 |
| futOspfRestartReason The router.s restarter reason code of OSPF graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
This object is persistent and when writte… | scalar | Enumeration | .1.3.6.1.4.1.2076.10.1.29 |
| futOspfPktsTxed This gives the Total no. of Packets Transmitted. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.10.1.3 |
| futOspfRTStaggeringInterval This object denotes the time interval in milliseconds after which the route
calculation is suspended for doing all other OSPF operations.Default value of
this object is equal to… | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2076.10.1.30 |
| futOspfRTStaggeringStatus This object indicates the status of route table calculation
staggering option | scalar | Enumeration | .1.3.6.1.4.1.2076.10.1.31 |
| futOspfHotStandbyAdminStatus High Availabilty feature enabled or disabled in OSPF | scalar | Enumeration | .1.3.6.1.4.1.2076.10.1.32 |
| futOspfHotStandbyState Internal State of the OSPF instance.
init(1) implies that the OSPF instance is up, but is unaware
of the status of its peer.
activeStandbyUp(2) implies that the current OSPF inst… | scalar | Enumeration | .1.3.6.1.4.1.2076.10.1.33 |
| futOspfDynamicBulkUpdStatus Status of dynamic bulk update between active and dynamic
OSPF instance. | scalar | Enumeration | .1.3.6.1.4.1.2076.10.1.34 |
| futOspfStanbyHelloSyncCount Total number of hello packets synced. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.10.1.35 |
| futOspfStanbyLsaSyncCount Total number of LSAs synced. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.10.1.36 |
| futOspfExtTraceLevel This object is used to define level of trace required for OSPF Extension.
Levels are defined as follows.
0x00000100 -- Restart Module.
0x00000200 -- Helper Module.
0x00000400 -- … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.10.1.37 |
| futospfRouterIdPermanence This variable displays the status of the ospfRouterId.
'dynamic' and 'permanent' refer to how the ospfRouterId is derived. This object … | scalar | Enumeration | .1.3.6.1.4.1.2076.10.1.38 |
| futOspfBfdStatus This object is to enable/disable BFD feature in OSPF.By default is enabled.
If it is disabled OSPF will not register with BFD for neighbor IP path monitoring | scalar | Enumeration | .1.3.6.1.4.1.2076.10.1.39 |
| futOspfPktsDisd This gives the Total no. of Packets Discarded. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.10.1.4 |
| futOspfBfdAllIfState This object is to enable/disable BFD for all OSPF interfaces
By default it is disabled. If it is enabled, OSPF will register
with BFD for neighbor IP path monitoring, when the OSP… | scalar | Enumeration | .1.3.6.1.4.1.2076.10.1.40 |
| futOspfRFC1583Compatibility Controls the preference rules, when choosing among multiple AS
external LSAs advertising the same destination.
When set to enabled, the preference rules remain those specified
by… | scalar | OSPF-MIBStatus | .1.3.6.1.4.1.2076.10.1.5 |
| futOspfMaxAreas deprecated This gives the maximum number of areas. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.10.1.6 |
| futOspfMaxLSAperArea deprecated This gives the maximum number of LSAs in each area. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.10.1.7 |
| futOspfMaxExtLSAs deprecated This gives the maximum number of AS-EXT LSAs in
the router's LSDB. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.10.1.8 |
| futOspfMaxSelfOrgLSAs deprecated This gives the maximum number of Self Originated LSAs
that can be geneated by the router. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.10.1.9 |