FUTURESOFT-OSPF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
21
Rows
21
Columns
145

futOspfAreaTable

table
.1.3.6.1.4.1.2076.10.2 · 1 row entry · 9 columns
Open in standard view 
Information describing the configured parameters 
and cumulative statistics of the router's
   attached areas.
futOspfAreaEntry entry .1.3.6.1.4.1.2076.10.2.1
Information describing the configured parameters
and cumulative statistics of one of the
router's attached areas.
Indexes
futOspfAreaId
Column Syntax OID
futOspfAreaId
A 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone.
OSPF-MIBAreaID
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.2076.10.2.1.1
futOspfAreaIfCount
This gives the Total no. of Ifaces in the Area
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.2.1.2
futOspfAreaNetCount
This gives the Total no. of Networks in the Area.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.2.1.3
futOspfAreaRtrCount
This gives the Total no. of Routers in the Area.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.2.1.4
futOspfAreaNSSATranslatorRole
Indicates an NSSA Border router's ability
to perform NSSA Translation of Type-7 LSAs
to Type-5 LSAs.
Enumerationr/w
Enumerated Values:
1always
2candidate
 .1.3.6.1.4.1.2076.10.2.1.5
futOspfAreaNSSATranslatorState
Indicates if and how an NSSA Border router is
performing NSSA translation of Type-7 to into Type-5
LSAs.When this object is set to enabled, the NSSA border
router's futOspfAreaNssaTranslatorRole has been set to
always.W…
Enumeration
Enumerated Values:
1enabled
2elected
3disabled
 .1.3.6.1.4.1.2076.10.2.1.6
futOspfAreaNSSATranslatorStabilityInterval
The number of seconds after an elected translator
determines its services are no longer required, that
it should continue to perform its translation duties.
OSPF-MIBPositiveIntegerr/w
Textual Convention: OSPF-MIBPositiveInteger Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2076.10.2.1.7
futOspfAreaNSSATranslatorEvents
Indicates the number of translator state
changes that have occurred since the last boot-up.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.2.1.8
futOspfAreaDfInfOriginate
Indicates the generation default Type-7 LSA.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.10.2.1.9

futOspfHostTable

table
.1.3.6.1.4.1.2076.10.3 · 1 row entry · 3 columns
Open in standard view 
The list of Hosts, and their metrics, that the
router will advertise as host routes.
futOspfHostEntry entry .1.3.6.1.4.1.2076.10.3.1
A metric to be advertised, for a given type of
service, when a given host is reachable.
Indexes
futOspfHostIpAddress futOspfHostTOS
Column Syntax OID
futOspfHostIpAddress
The IP Address of the Host.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.3.1.1
futOspfHostTOS
The Type of Service of the route being configured.
OSPF-MIBTOSType
Textual Convention: OSPF-MIBTOSType Integer32
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.2076.10.3.1.2
futOspfHostRouteIfIndex
The Interface to reach the host
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.10.3.1.3

futOspfIfTable

table
.1.3.6.1.4.1.2076.10.4 · 1 row entry · 22 columns
Open in standard view 
The OSPF Interface Table describes the  inter-
faces from the viewpoint of OSPF.
futOspfIfEntry entry .1.3.6.1.4.1.2076.10.4.1
The OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF.
Indexes
futOspfIfIpAddress futOspfAddressLessIf
Column Syntax OID
futOspfIfIpAddress
The IP address of this OSPF interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.4.1.1
futOspfAddressLessIf
For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces havin…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.10.4.1.2
futOspfIfOperState
This gives the Operational Status of the Interface.
Enumeration
Enumerated Values:
1operup
2operdown
3loopback
4unloop
 .1.3.6.1.4.1.2076.10.4.1.3
futOspfIfPassive
This object is used to make the interface as passive.
If set to TRUE, then interface will be passive
If set to FALSE then interface will be normal
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2076.10.4.1.4
futOspfIfNbrCount
This gives the Total number of Neighbours through
that Interface.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.4.1.5
futOspfIfAdjCount
This gives the Total number of Adjacencies through
that Interface.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.4.1.6
futOspfIfHelloRcvd
This gives the Total number of Hello packets received
through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.4.1.7
futOspfIfHelloTxed
This gives the Total number of Hello packets
transmitted through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.4.1.8
futOspfIfHelloDisd
This gives the Total number of Hello packets
discarded through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.4.1.9
futOspfIfDdpRcvd
This gives the Total number of Ddp packets received
through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.4.1.10
futOspfIfDdpTxed
This gives the Total number of Ddp packets
transmitted through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.4.1.11
futOspfIfDdpDisd
This gives the Total number of Ddp packets discarded
through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.4.1.12
futOspfIfLrqRcvd
This gives the Total number of Lrq packets received
through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.4.1.13
futOspfIfLrqTxed
This gives the Total number of Lrq packets
transmitted through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.4.1.14
futOspfIfLrqDisd
This gives the Total number of Lrq packets discarded
through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.4.1.15
futOspfIfLsuRcvd
This gives the Total number of Lsu packets received
through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.4.1.16
futOspfIfLsuTxed
This gives the Total number of Lsu packets
transmitted through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.4.1.17
futOspfIfLsuDisd
This gives the Total number of Lsu packets discarded
through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.4.1.18
futOspfIfLakRcvd
This gives the Total number of Lak packets received
through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.4.1.19
futOspfIfLakTxed
This gives the Total number of Lak packets
transmitted through that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.4.1.20
futOspfIfLakDisd
This gives the Total number of Lak packets discarded
on that Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.4.1.21
futOspfIfBfdState
This object is to enable/disable BFD in a specific OSPF interface.
By default it is disabled. But when futOspfBfdAllIfState is enabled,
internally this object will be enabled for all interface entries.

If…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.10.4.1.22

futOspfIfMD5AuthTable

table
.1.3.6.1.4.1.2076.10.5 · 1 row entry · 9 columns
Open in standard view 
The OSPF Interface Authentication Table describes the parameters
required for MD5 cryptographic Authentication.
futOspfIfMD5AuthEntry entry .1.3.6.1.4.1.2076.10.5.1
The OSPF Interface MD5 Authentication Entry describes one
Authentication Key from the viewpoint of OSPF.
Indexes
futOspfIfMD5AuthIpAddress futOspfIfMD5AuthAddressLessIf futOspfIfMD5AuthKeyId
Column Syntax OID
futOspfIfMD5AuthIpAddress
The IP address of this OSPF interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.5.1.1
futOspfIfMD5AuthAddressLessIf
For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces havin…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.10.5.1.2
futOspfIfMD5AuthKeyId
This object identifies the secret key used to create the
message digest appended to the OSPF packet.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2076.10.5.1.3
futOspfIfMD5AuthKey
This is the secret key which is used to create the
message digest appended to the OSPF packet.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2076.10.5.1.4
futOspfIfMD5AuthKeyStartAccept
The time the router will start accepting packets that have
been created with this key. The value shown will be configured
time + system time at which the value is configured.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.10.5.1.5
futOspfIfMD5AuthKeyStartGenerate
The time the router will start using this key for packets
generation.The value shown will be configured
time + system time at which the value is configured.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.10.5.1.6
futOspfIfMD5AuthKeyStopGenerate
The time the router will stop using this key for packets
generation. The value -1 indicates infinite lifetime.The
value shown will be configured time + system time at which
the value is configured.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.10.5.1.7
futOspfIfMD5AuthKeyStopAccept
The time the router will stop accepting packets that have
been created with this key. The value -1 indicates infinite
lifetime.The value shown will be configured
time + system time at which the value is configured.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.10.5.1.8
futOspfIfMD5AuthKeyStatus
Identifies the status of the key.
NOTE:invalid (2) currently not supported
Enumerationr/w
Enumerated Values:
1valid
3delete
 .1.3.6.1.4.1.2076.10.5.1.9

futOspfVirtIfMD5AuthTable

table
.1.3.6.1.4.1.2076.10.6 · 1 row entry · 9 columns
Open in standard view 
The OSPF Interface Authentication Table describes the parameters
required for MD5 cryptographic Authentication.
futOspfVirtIfMD5AuthEntry entry .1.3.6.1.4.1.2076.10.6.1
The OSPF Interface MD5 Authentication Entry describes one
Authentication Key from the viewpoint of OSPF.
Indexes
futOspfVirtIfMD5AuthAreaId futOspfVirtIfMD5AuthNeighbor futOspfVirtIfMD5AuthKeyId
Column Syntax OID
futOspfVirtIfMD5AuthAreaId
The Transit Area that the Virtual Link
traverses. By definition, this should not be 0.0.0.0.
OSPF-MIBAreaID
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.2076.10.6.1.1
futOspfVirtIfMD5AuthNeighbor
The Router ID of the Virtual Neighbor.
OSPF-MIBRouterID
Textual Convention: OSPF-MIBRouterID OctetString
 .1.3.6.1.4.1.2076.10.6.1.2
futOspfVirtIfMD5AuthKeyId
This object identifies the secret key used to create the
message digest appended to the OSPF packet.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2076.10.6.1.3
futOspfVirtIfMD5AuthKey
This is the secret key which is used to create the
message digest appended to the OSPF packet.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2076.10.6.1.4
futOspfVirtIfMD5AuthKeyStartAccept
The time the router will start accepting packets that have
been created with this key.The value shown will be configured
time + system time at which the value is configured.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.10.6.1.5
futOspfVirtIfMD5AuthKeyStartGenerate
The time the router will start using this key for packet
generation.The value shown will be configured
time + system time at which the value is configured.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.10.6.1.6
futOspfVirtIfMD5AuthKeyStopGenerate
The time the router will stop using this key for packets
generation. The value -1 indicates infinite lifetime.The value
shown will be configured time + system time at which the value
is configured.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.10.6.1.7
futOspfVirtIfMD5AuthKeyStopAccept
The time the router will stop accepting packets that have
been created with this key. The value -1 indicates infinite
lifetime. The value shown will be configured
time + system time at which the value is configured.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.10.6.1.8
futOspfVirtIfMD5AuthKeyStatus
Identifies the status of the key.
NOTE: invalid (2) is currently not supported
Enumerationr/w
Enumerated Values:
1valid
3delete
 .1.3.6.1.4.1.2076.10.6.1.9

futOspfNbrTable

table
.1.3.6.1.4.1.2076.10.7 · 1 row entry · 8 columns
Open in standard view 
A table of non-virtual neighbor information.
futOspfNbrEntry entry .1.3.6.1.4.1.2076.10.7.1
The information regarding a single neighbor.
Indexes
futOspfNbrIpAddr futOspfNbrAddressLessIndex
Column Syntax OID
futOspfNbrIpAddr
The IP address this neighbor is using in its
IP Source Address. Note that, on addressless
links, this will not be 0.0.0.0, but the ad-
dress of another of the neighbor's interfaces.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.7.1.1
futOspfNbrAddressLessIndex
On an interface having an IP Address, zero.
On addressless interfaces, the corresponding
value of ifIndex in the Internet Standard MIB.
On row creation, this can be derived from the
instance.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.10.7.1.2
futOspfNbrDBSummaryQLen
This gives the queue Length of the Database summary List .
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.7.1.3
futOspfNbrLSReqQLen
This gives the Length of Link State Request Queue .
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.7.1.4
futOspfNbrRestartHelperStatus
Indicates whether the router is acting
as a graceful restart helper for the neighbor.
Enumeration
Enumerated Values:
1notHelping
2helping
 .1.3.6.1.4.1.2076.10.7.1.5
futOspfNbrRestartHelperAge
Remaining time in current OSPF graceful restart
interval, if the router is acting as a restart
helper for the neighbor.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.7.1.6
futOspfNbrRestartHelperExitReason
Describes the outcome of the last attempt at acting
as a graceful restart helper for the neighbor.
Enumeration
Enumerated Values:
1none
2inProgress
3completed
4timedOut
5topologyChanged
 .1.3.6.1.4.1.2076.10.7.1.7
futOspfNbrBfdState
This is a read-only object. This will be enabled internally only when BFD is
enabled for monitoring this neighbor IP path.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.10.7.1.8

futOspfRoutingTable

table
.1.3.6.1.4.1.2076.10.8 · 1 row entry · 9 columns
Open in standard view 
A table of routing information.
futOspfRoutingEntry entry .1.3.6.1.4.1.2076.10.8.1
The information regarding a single route.
Indexes
futOspfRouteIpAddr futOspfRouteIpAddrMask futOspfRouteIpTos futOspfRouteIpNextHop
Column Syntax OID
futOspfRouteIpAddr
IP Address of the route
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.8.1.1
futOspfRouteIpAddrMask
IP Address Mask of the route
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.8.1.2
futOspfRouteIpTos
IP TOS of the route
OSPF-MIBTOSType
Textual Convention: OSPF-MIBTOSType Integer32
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.2076.10.8.1.3
futOspfRouteIpNextHop
IP Next Hop of the route
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.8.1.4
futOspfRouteType
Type of the route
Enumeration
Enumerated Values:
1intraArea
2interArea
3type1External
4type2External
 .1.3.6.1.4.1.2076.10.8.1.5
futOspfRouteAreaId
Area ID associated with the route
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.8.1.6
futOspfRouteCost
It is a Type 1 external metrics which is
expressed in the same units as OSPF interface
cost ie. in terms of the OSPF link state metric.
If Type1 and Type2 cost are present, Type1 external
metrics always take precedenc…
OSPF-MIBBigMetric
Textual Convention: OSPF-MIBBigMetric Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.2076.10.8.1.7
futOspfRouteType2Cost
Type 2 external metrics are configured with
the cost greater than any path internal to the AS.
Use of Type 2 external metrics assumes that routing
between AS is the major cost of routing a packet, and
eliminates the…
OSPF-MIBBigMetric
Textual Convention: OSPF-MIBBigMetric Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.2076.10.8.1.8
futOspfRouteInterfaceIndex
Interface Index associated with the route
.1.3.6.1.4.1.2076.10.8.1.9

futOspfSecIfTable

table
.1.3.6.1.4.1.2076.10.9 · 1 row entry · 5 columns
Open in standard view 
A table of Secondary IP Address information.
futOspfSecIfEntry entry .1.3.6.1.4.1.2076.10.9.1
The information regarding a single route.
Indexes
futOspfPrimIpAddr futOspfPrimAddresslessIf futOspfSecIpAddr futOspfSecIpAddrMask
Column Syntax OID
futOspfPrimIpAddr
Primary Interface IP Address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.9.1.1
futOspfPrimAddresslessIf
Primary Interface Addressless Index.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.10.9.1.2
futOspfSecIpAddr
Secondary Interface IP Address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.9.1.3
futOspfSecIpAddrMask
Secondary Interface IP Address Mask.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.9.1.4
futOspfSecIfStatus
This variable displays the status of the entry.
Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.10.9.1.5

futOspfAreaAggregateTable

table
.1.3.6.1.4.1.2076.10.10 · 1 row entry · 5 columns
Open in standard view 
Supports configuration of External Tag for
Type-7 Address ranges configured.
futOspfAreaAggregateEntry entry .1.3.6.1.4.1.2076.10.10.1
Supports configuration of External Tag for
Type-7 Address ranges configured.
Indexes
futOspfAreaAggregateAreaID futOspfAreaAggregateLsdbType futOspfAreaAggregateNet futOspfAreaAggregateMask
Column Syntax OID
futOspfAreaAggregateAreaID
The Area the Address Aggregate is to be found
within.
OSPF-MIBAreaID
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.2076.10.10.1.1
futOspfAreaAggregateLsdbType
The type of the Address Aggregate. This field
specifies the Lsdb type that this Address Ag-
gregate applies to.
Enumeration
Enumerated Values:
3summaryLink
7nssaExternalLink
 .1.3.6.1.4.1.2076.10.10.1.2
futOspfAreaAggregateNet
The IP Address of the Net or Subnet indicated
by the range.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.10.1.3
futOspfAreaAggregateMask
The Subnet Mask that pertains to the Net or
Subnet.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.10.1.4
futOspfAreaAggregateExternalTag
A 32-bit field attached to each external route.
This is not used by OSPF protocol itself. It may
be used to communicate information between AS
boundary routers. The precise nature of this information
is outside the sco…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.10.10.1.5

futOspfAsExternalAggregationTable

table
.1.3.6.1.4.1.2076.10.11 · 1 row entry · 6 columns
Open in standard view 
Indicates whether for the specified address range
Type-7/Type-5 LSA will be aggregated or not generated.
futOspfAsExternalAggregationEntry entry .1.3.6.1.4.1.2076.10.11.1
Supports configuration of Type-5,Type-7 Address Range specifying
whether for the configured range, Type-5,Type-7 LSA will be
generated or not, and if generated whether aggregation is performed.
Indexes
futOspfAsExternalAggregationNet futOspfAsExternalAggregationMask futOspfAsExternalAggregationAreaId
Column Syntax OID
futOspfAsExternalAggregationNet
The IP address of the Net indicated by
the range.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.11.1.1
futOspfAsExternalAggregationMask
The subnet mask that pertains to the
range.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.11.1.2
futOspfAsExternalAggregationAreaId
Refer to description in futOspfAsExternalAggregationEffect.
OSPF-MIBAreaID
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.2076.10.11.1.3
futOspfAsExternalAggregationEffect
Indicates whether Type-5/Type-7 will be aggregated or not
generated for the specified range.
When set to allowAll (3) and associated areaId is 0.0.0.0
aggregated Type-5 are generated for the specified range. In
additio…
Enumerationr/w
Enumerated Values:
1advertise
2doNotAdvertise
3allowAll
4denyAll
 .1.3.6.1.4.1.2076.10.11.1.4
futOspfAsExternalAggregationTranslation
This when set to enabled, P Bit is set in
the generated Type-7 LSA. When set disabled
P Bit is clear in the generated Type-7 LSA
for the range.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.10.11.1.5
futOspfAsExternalAggregationStatus
This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.10.11.1.6

futOspfOpaqueInterfaceTable

table
.1.3.6.1.4.1.2076.10.12.2 · 1 row entry · 2 columns
Open in standard view 
Information describing the count and checksum of the Type9 LSAs.
futOspfOpaqueInterfaceEntry entry .1.3.6.1.4.1.2076.10.12.2.1
Information describing the Type 9 LSAs Count and Checksums.
Indexes
No indexes recorded
Column Syntax OID
futOspfOpaqueType9LsaCount
The total number of TYPE 9 Opaque link-state advertisements.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.12.2.1.1
futOspfOpaqueType9LsaCksumSum
The 32-bit unsigned sum of the link-state ad-
vertisements' TYPE9 Opaque LS checksums.The sum
change in a router's link state data-base, and
to compare the link-state database of the two
routers.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.10.12.2.1.2

futOspfType9LsdbTable

table
.1.3.6.1.4.1.2076.10.12.3 · 1 row entry · 8 columns
Open in standard view 
The OSPF Process's TYPE9 Link State Database.
futOspfType9LsdbEntry entry .1.3.6.1.4.1.2076.10.12.3.1
A single Type 9 Link State Advertisement.
Indexes
futOspfType9LsdbIfIpAddress futOspfType9LsdbOpaqueType futOspfType9LsdbLsid futOspfType9LsdbRouterId
Column Syntax OID
futOspfType9LsdbIfIpAddress
The IP address of this OSPF interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.12.3.1.1
futOspfType9LsdbOpaqueType
The Opaque type of the LSA.
Integer32
Constraints:
range: 1-11
 .1.3.6.1.4.1.2076.10.12.3.1.2
futOspfType9LsdbLsid
The Link State ID is an LS Type Specific field
containing the Opaque Type and Opaque ID.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.12.3.1.3
futOspfType9LsdbRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID
Textual Convention: OSPF-MIBRouterID OctetString
 .1.3.6.1.4.1.2076.10.12.3.1.4
futOspfType9LsdbSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number t…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.10.12.3.1.5
futOspfType9LsdbAge
This field is the age of the link state adver-
tisement in seconds.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.10.12.3.1.6
futOspfType9LsdbChecksum
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checks…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.10.12.3.1.7
futOspfType9LsdbAdvertisement
The entire TYPE9 Opaque Link State Advertisement,
including its header.
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2076.10.12.3.1.8

futOspfType11LsdbTable

table
.1.3.6.1.4.1.2076.10.12.4 · 1 row entry · 7 columns
Open in standard view 
The OSPF Process's TYPE11 Links State Database.
futOspfType11LsdbEntry entry .1.3.6.1.4.1.2076.10.12.4.1
A single TYPE11 Opaque Link State Advertisement.
Indexes
futOspfType11LsdbOpaqueType futOspfType11LsdbLsid futOspfType11LsdbRouterId
Column Syntax OID
futOspfType11LsdbOpaqueType
The Opaquetype of the link state advertisement.
Integer32
Constraints:
range: 1-11
 .1.3.6.1.4.1.2076.10.12.4.1.1
futOspfType11LsdbLsid
The Link State ID identifies the opaque type and
the opaque ID of the received Opaque LSA for an application.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.12.4.1.2
futOspfType11LsdbRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID
Textual Convention: OSPF-MIBRouterID OctetString
 .1.3.6.1.4.1.2076.10.12.4.1.3
futOspfType11LsdbSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number t…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.10.12.4.1.4
futOspfType11LsdbAge
This field is the age of the link state adver-
tisement in seconds.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.10.12.4.1.5
futOspfType11LsdbChecksum
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checks…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.10.12.4.1.6
futOspfType11LsdbAdvertisement
The entire Link State Advertisement, including
its header.
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2076.10.12.4.1.7

futOspfAppInfoDbTable

table
.1.3.6.1.4.1.2076.10.12.5 · 1 row entry · 9 columns
Open in standard view 
This table maintains information related to application statistics.
futOspfAppInfoDbEntry entry .1.3.6.1.4.1.2076.10.12.5.1
A single Application's statistical Information.
Indexes
futOspfAppInfoDbAppid
Column Syntax OID
futOspfAppInfoDbAppid
The Application's ID. Each Application has a
unique Appid associated with it.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2076.10.12.5.1.1
futOspfAppInfoDbOpaqueType
The OpaqueType of the LSA the application can
generate or receive. Each Application can register
only for a single OpaqueType.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2076.10.12.5.1.2
futOspfAppInfoDbLsaTypesSupported
The LSA Types the application can generate is indicated
by a BITMASK.The BITMASK and the interpretation of the
types supported is given as below:-

BitMask TypesSupported
0 0 0 ==> No types
0 0 1 …
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.2076.10.12.5.1.3
futOspfAppInfoDbType9Gen
The number of Type 9 LSAs generated by the application.
This field is invalid if the application does not
support the generation of Type9 LSAs.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.12.5.1.4
futOspfAppInfoDbType9Rcvd
The number of Type 9 LSAs received by the application.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.12.5.1.5
futOspfAppInfoDbType10Gen
The number of Type 10 LSAs generated by the application.
This field is invalid if the application does not
support the generation of Type10 LSAs.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.12.5.1.6
futOspfAppInfoDbType10Rcvd
The number of Type 10 LSAs received by the application.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.12.5.1.7
futOspfAppInfoDbType11Gen
The number of Type 11 LSAs generated by the application.
This field is invalid if the application does not support
the generation of Type11 LSAs.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.12.5.1.8
futOspfAppInfoDbType11Rcvd
The number of Type 11 LSAs received by the application.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.12.5.1.9

futOspfRRDRouteConfigTable

table
.1.3.6.1.4.1.2076.10.13.2 · 1 row entry · 7 columns
Open in standard view 
A table describing the configuration of Metric Cost and Route
Type information to be applied to the routes learnt from the RTM.
futOspfRRDRouteConfigEntry entry .1.3.6.1.4.1.2076.10.13.2.1
Information describing the configuration of single route entry.
Indexes
futOspfRRDRouteDest futOspfRRDRouteMask
Column Syntax OID
futOspfRRDRouteDest
Ip Address of the Destination route.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.13.2.1.1
futOspfRRDRouteMask
Mask of the Destination route.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.13.2.1.2
futOspfRRDRouteMetric
The Metric value applied to the route before it is adv. into the
OSPF Domain.
OSPF-MIBBigMetricr/w
Textual Convention: OSPF-MIBBigMetric Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.2076.10.13.2.1.3
futOspfRRDRouteMetricType
The Metric Type applied to the route before it is adv. into the
OSPF Domain
Enumerationr/w
Enumerated Values:
1asexttype1
2asexttype2
 .1.3.6.1.4.1.2076.10.13.2.1.4
futOspfRRDRouteTagType
The Tag Type MIB object describes whether Tags will be
automatically generated or will be manually configured.
If tags are manually configured , the futospfRRDRouteTag
MIB has to be set with the Tag value needed.
Enumerationr/w
Enumerated Values:
1manual
2automatic
 .1.3.6.1.4.1.2076.10.13.2.1.5
futOspfRRDRouteTag
The Route Tag in case the user configures a Manual option for
the tags.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.13.2.1.6
futOspfRRDRouteStatus
The variable displays the status of the entry.Setting it to
'invalid' has the effect of rendering it inoperative.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.10.13.2.1.7

futOspfVirtNbrTable

table
.1.3.6.1.4.1.2076.10.14 · 1 row entry · 3 columns
Open in standard view 
A table of virtual neighbor information.
futOspfVirtNbrEntry entry .1.3.6.1.4.1.2076.10.14.1
Virtual neighbor information.
Indexes
No indexes recorded
Column Syntax OID
futOspfVirtNbrRestartHelperStatus
Indicates whether the router is acting
as a graceful restart helper for the neighbor.
Enumeration
Enumerated Values:
1notHelping
2helping
 .1.3.6.1.4.1.2076.10.14.1.1
futOspfVirtNbrRestartHelperAge
Remaining time in current OSPF graceful restart
interval, if the router is acting as a restart
helper for the neighbor.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.10.14.1.2
futOspfVirtNbrRestartHelperExitReason
Describes the outcome of the last attempt at acting
as a graceful restart helper for the neighbor.
Enumeration
Enumerated Values:
1none
2inProgress
3completed
4timedOut
5topologyChanged
 .1.3.6.1.4.1.2076.10.14.1.3

futOspfDistInOutRouteMapTable

table
.1.3.6.1.4.1.2076.10.15.1 · 1 row entry · 4 columns
Open in standard view 
A table describing the configuration of filtering for route map.
futOspfDistInOutRouteMapEntry entry .1.3.6.1.4.1.2076.10.15.1.1
Information describing the filtering configuration of single entry.
Indexes
futOspfDistInOutRouteMapName futOspfDistInOutRouteMapType
Column Syntax OID
futOspfDistInOutRouteMapName
Route map name.
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.2076.10.15.1.1.1
futOspfDistInOutRouteMapType
Type of route map to indicate the route map is for
distribute in or for distribute out or for distance.
1 - distance
2 - distribute in
3 - distribute out
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.2076.10.15.1.1.3
futOspfDistInOutRouteMapValue
Distance value ( this will be unused for distribute list )
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2076.10.15.1.1.4
futOspfDistInOutRouteMapRowStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.10.15.1.1.5

futOspfIfAuthTable

table
.1.3.6.1.4.1.2076.10.17 · 1 row entry · 9 columns
Open in standard view 
The OSPF Interface Authentication Table describes the parameters
required for  cryptographic Authentication.
futOspfIfAuthEntry entry .1.3.6.1.4.1.2076.10.17.1
The OSPF Interface Authentication Entry describes one
Authentication Key from the viewpoint of OSPF.
Indexes
futOspfIfAuthIpAddress futOspfIfAuthAddressLessIf futOspfIfAuthKeyId
Column Syntax OID
futOspfIfAuthIpAddress
The IP address of this OSPF interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.10.17.1.1
futOspfIfAuthAddressLessIf
For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces havin…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.10.17.1.2
futOspfIfAuthKeyId
This object identifies the secret key used to create the
message digest appended to the OSPF packet.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2076.10.17.1.3
futOspfIfAuthKey
This is the secret key which is used to create the
message digest appended to the OSPF packet.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2076.10.17.1.4
futOspfIfAuthKeyStartAccept
The time the router will start accepting packets that have
been created with this key.If the value is not set, then it
will be taken as infinite and displayed as 9999-12-31,23:59:59.0.
For example, Tuesday May 26, 19…
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2076.10.17.1.5
futOspfIfAuthKeyStartGenerate
The time the router will start using this key for packets
generation.If the value is not set, then it will be taken
as infinite and displayed as 9999-12-31,23:59:59.0.
For example, Tuesday May 26, 1992 at 1:30:15 PM …
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2076.10.17.1.6
futOspfIfAuthKeyStopGenerate
The time the router will stop using this key for packets
generation.If the value is not set, then it will be taken
as infinite and displayed as 9999-12-31,23:59:59.0.
For example, Tuesday May 26, 1992 at 1:30:15 PM s…
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2076.10.17.1.7
futOspfIfAuthKeyStopAccept
The time the router will stop accepting packets that have
been created with this key.If the value is not set, then it
will be taken as infinite and displayed as 9999-12-31,23:59:59.0.
For example, Tuesday May 26, 199…
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2076.10.17.1.8
futOspfIfAuthKeyStatus
Identifies the status of the key.
NOTE:invalid (2) currently not supported
Enumerationr/w
Enumerated Values:
1valid
3delete
 .1.3.6.1.4.1.2076.10.17.1.9

futOspfVirtIfAuthTable

table
.1.3.6.1.4.1.2076.10.18 · 1 row entry · 9 columns
Open in standard view 
The OSPF Interface Authentication Table describes the parameters
required for cryptographic Authentication.
futOspfVirtIfAuthEntry entry .1.3.6.1.4.1.2076.10.18.1
The OSPF Interface Authentication Entry describes one
Authentication Key from the viewpoint of OSPF.
Indexes
futOspfVirtIfAuthAreaId futOspfVirtIfAuthNeighbor futOspfVirtIfAuthKeyId
Column Syntax OID
futOspfVirtIfAuthAreaId
The Transit Area that the Virtual Link
traverses. By definition, this should not be 0.0.0.0.
OSPF-MIBAreaID
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.2076.10.18.1.1
futOspfVirtIfAuthNeighbor
The Router ID of the Virtual Neighbor.
OSPF-MIBRouterID
Textual Convention: OSPF-MIBRouterID OctetString
 .1.3.6.1.4.1.2076.10.18.1.2
futOspfVirtIfAuthKeyId
This object identifies the secret key used to create the
message digest appended to the OSPF packet.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2076.10.18.1.3
futOspfVirtIfAuthKey
This is the secret key which is used to create the
message digest appended to the OSPF packet.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2076.10.18.1.4
futOspfVirtIfAuthKeyStartAccept
The time the router will start accepting packets that have
been created with this key.If the value is not set, then it
will be taken as infinite and displayed as 9999-12-31,23:59:59.0.
For example, Tuesday May 26, 19…
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2076.10.18.1.5
futOspfVirtIfAuthKeyStartGenerate
The time the router will start using this key for packets
generation.If the value is not set, then it will be taken
as infinite and displayed as 9999-12-31,23:59:59.0.
For example, Tuesday May 26, 1992 at 1:30:15 PM …
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2076.10.18.1.6
futOspfVirtIfAuthKeyStopGenerate
The time the router will stop using this key for packets
generation.If the value is not set, then it will be taken
as infinite and displayed as 9999-12-31,23:59:59.0.
For example, Tuesday May 26, 1992 at 1:30:15 PM s…
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2076.10.18.1.7
futOspfVirtIfAuthKeyStopAccept
The time the router will stop accepting packets that have
been created with this key.If the value is not set, then it
will be taken as infinite and displayed as 9999-12-31,23:59:59.0.
For example, Tuesday May 26, 199…
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2076.10.18.1.8
futOspfVirtIfAuthKeyStatus
Identifies the status of the key.
NOTE: invalid (2) is currently not supported
Enumerationr/w
Enumerated Values:
1valid
3delete
 .1.3.6.1.4.1.2076.10.18.1.9

futOspfIfCryptoAuthTable

table
.1.3.6.1.4.1.2076.10.19 · 1 row entry · 1 columns
Open in standard view 
A table which holds the crypto authentication type.This must be configured
for SHA-1 / SHA-2 authentication to be enabled.
futOspfIfCryptoAuthEntry entry .1.3.6.1.4.1.2076.10.19.1
Describes the cryptographic authentication.
Indexes
No indexes recorded
Column Syntax OID
futOspfIfCryptoAuthType
Crypto authentication type to be used on the interface. This object
should be used to set SHA authentication along with ospfIfAuthType
in stdospf.mib
Enumerationr/w
Enumerated Values:
1md5
2sha1
3sha224
4sha256
5sha384
6sha512
 .1.3.6.1.4.1.2076.10.19.1.1

futOspfVirtIfCryptoAuthTable

table
.1.3.6.1.4.1.2076.10.20 · 1 row entry · 1 columns
Open in standard view 
A table which holds the crypto authentication type.
futOspfVirtIfCryptoAuthEntry entry .1.3.6.1.4.1.2076.10.20.1
Describes the cryptographic authentication.
Indexes
No indexes recorded
Column Syntax OID
futOspfVirtIfCryptoAuthType
Crypto authentication type to be used on the interface This object
should be used to set SHA authentication along with ospfVirtIfAuthType
in stdospf.mib
Enumerationr/w
Enumerated Values:
1md5
2sha1
3sha224
4sha256
5sha384
6sha512
 .1.3.6.1.4.1.2076.10.20.1.1