configUserAuthenticationMode

FSM726S-MIB · .1.3.6.1.4.1.4526.1.1.11.27
MIB view Table view

Object

scalar mandatory r/w Enumeration 
Determines whether the user password will be authenticated
by the switch, a remote RADIUS server, or some combination
of the two.

Context

MIB
FSM726S-MIB
OID
.1.3.6.1.4.1.4526.1.1.11.27
Type
scalar
Access
readwrite
Status
mandatory
Parent
netgearConfigGroup
Siblings
35

Syntax

Enumeration

Values & Constraints

Enumerated Values
1basicPasswordOnly
2basicPasswordThenRemoteRADIUS
4remoteRADIUSOnly

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
configVerSwPrimary mandatory
The software image version string
scalarOctetString.1.3.6.1.4.1.4526.1.1.11.1
configMirrorMon mandatory
When mirroring is enabled (configMirroringOnOff = enabled), this identifies the mirroring monitoring port. This value has a valid range of 1 to ifNumber when enabled.
scalarInteger32.1.3.6.1.4.1.4526.1.1.11.10
configIpAssignmentMode mandatory
Indicates whether the device address is assigned by the user (manual), BootP, or DHCP.
scalarEnumeration.1.3.6.1.4.1.4526.1.1.11.12
configPhysAddress mandatory
The interface's address at the protocol layer immediately 'below' the network layer in the protocol stack. This is the physical address for the end-station.
scalarMacAddress.1.3.6.1.4.1.4526.1.1.11.13
configPasswordAdmin mandatory
The adminstrator password
scalarOctetString.1.3.6.1.4.1.4526.1.1.11.15
configIpAddress mandatory
The IP Address for the RDU box.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4526.1.1.11.16
configNetMask mandatory
The network mask for the RDU box.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4526.1.1.11.17
configGateway mandatory
The Gatway Address for the unit.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4526.1.1.11.18
configSave mandatory
Physically saves the current configuration to nvram. - use with care. (1) saves the configuration (2) does nothing.
scalarEnumeration.1.3.6.1.4.1.4526.1.1.11.19
configVerHwChipSet mandatory
The hardware chipset version string
scalarOctetString.1.3.6.1.4.1.4526.1.1.11.2
configVerBootRomImage mandatory
The Boot ROM version string
scalarOctetString.1.3.6.1.4.1.4526.1.1.11.21
configRestoreDefaults mandatory
Restores the configuration of the unit to the original settings.
scalarEnumeration.1.3.6.1.4.1.4526.1.1.11.22
configIGMPOnOff mandatory
Enable or disable the IGMP protocol within the switch.
scalarEnumeration.1.3.6.1.4.1.4526.1.1.11.23
configWebOnOff mandatory
Enable or disable the Web Interface.
scalarEnumeration.1.3.6.1.4.1.4526.1.1.11.24
configHighPriorityOptimization mandatory
Enable or disable high priority optimization.
scalarEnumeration.1.3.6.1.4.1.4526.1.1.11.25
configRadiusServerIpAddress mandatory
The IP Address of the RADIUS server used for remote user authentication.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4526.1.1.11.28
configRadiusSharedSecret mandatory
A string of characters used in the RADIUS password encryption process.
scalarOctetString.1.3.6.1.4.1.4526.1.1.11.29
configBootMode mandatory
Defines the method used for downloading the image when reset.
scalarEnumeration.1.3.6.1.4.1.4526.1.1.11.3
configTelnetConsole mandatory
Enable or disable the telnet console.
scalarEnumeration.1.3.6.1.4.1.4526.1.1.11.30
configDiffServTable mandatory
A list of DSCP Priorities.
table-.1.3.6.1.4.1.4526.1.1.11.31
configTftpServerIpAddress mandatory
The IP Address of the tftp server used to upload and download configuration files. This object is to be used in conjunction with configTftpServerFileName and configTftpOperation.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4526.1.1.11.32
configTftpServerFileName mandatory
The filename, including the path, used to store or retrieve a configuration file from the tftp server. This object is to be used in conjunction with configTftpServerIpAddress an…
scalarOctetString.1.3.6.1.4.1.4526.1.1.11.33
configTftpOperation mandatory
The tftp operation to perform. Either download a configuration to the unit or upload the current configuration to the tftp server. This object is to be used in conjunction with …
scalarEnumeration.1.3.6.1.4.1.4526.1.1.11.34
configIpFilter mandatory
Determines if access to the device is limited to only those IP addresses specified in the configIpFilterTable.
scalarEnumeration.1.3.6.1.4.1.4526.1.1.11.35
configIpFilterTable mandatory
A list of IP addresses allowed access to this device.
table-.1.3.6.1.4.1.4526.1.1.11.36
configUserName mandatory
The users login Id.
scalarOctetString.1.3.6.1.4.1.4526.1.1.11.37
configPasswordProtection mandatory
Determines if a user must login before gaining access to the device.
scalarEnumeration.1.3.6.1.4.1.4526.1.1.11.38
configPasswordEncryption mandatory
Determines when the password is written to the configuration file whether it is written as clear text or encrypted format.
scalarEnumeration.1.3.6.1.4.1.4526.1.1.11.39
configBootFtpServerIp mandatory
The FTP server's IP address used for downloading the boot image
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4526.1.1.11.4
configAuthServerIpAddress mandatory
The IP Address of the server used for 802.1x authentication.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.4526.1.1.11.40
configAuthServerSharedSecret mandatory
A string of characters used in the RADIUS password encryption process by 802.1x authentication.
scalarOctetString.1.3.6.1.4.1.4526.1.1.11.41
configBootImageFileName mandatory
The path and filename of the boot image to download
scalarOctetString.1.3.6.1.4.1.4526.1.1.11.5
configPortTable mandatory
A list of interface entries used for enterprise specific configuration. The number of entries is given by the value of ifNumber. All interface entries are assumed to be Ethernet…
table-.1.3.6.1.4.1.4526.1.1.11.6
configMirroringOnOff mandatory
Enable or disable port mirroring.
scalarEnumeration.1.3.6.1.4.1.4526.1.1.11.8
configMirrorSrc mandatory
When mirroring is enabled (configMirroringOnOff = enabled), this identifies the mirroring source port. This value has a valid range of 1 to ifNumber when enbaled.
scalarInteger32.1.3.6.1.4.1.4526.1.1.11.9