configDiffServTable

FSM726S-MIB · .1.3.6.1.4.1.4526.1.1.11.31

Object

table mandatory

A list of DSCP Priorities.

Context

MIB: FSM726S-MIB
OID: .1.3.6.1.4.1.4526.1.1.11.31
Type: table
Status: mandatory
Parent: netgearConfigGroup
Siblings: 35
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
configVerSwPrimary mandatory The software image version string	scalar	OctetString	`.1.3.6.1.4.1.4526.1.1.11.1`
configMirrorMon mandatory When mirroring is enabled (configMirroringOnOff = enabled), this identifies the mirroring monitoring port. This value has a valid range of 1 to ifNumber when enabled.	scalar	Integer32	`.1.3.6.1.4.1.4526.1.1.11.10`
configIpAssignmentMode mandatory Indicates whether the device address is assigned by the user (manual), BootP, or DHCP.	scalar	Enumeration	`.1.3.6.1.4.1.4526.1.1.11.12`
configPhysAddress mandatory The interface's address at the protocol layer immediately 'below' the network layer in the protocol stack. This is the physical address for the end-station.	scalar	MacAddress	`.1.3.6.1.4.1.4526.1.1.11.13`
configPasswordAdmin mandatory The adminstrator password	scalar	OctetString	`.1.3.6.1.4.1.4526.1.1.11.15`
configIpAddress mandatory The IP Address for the RDU box.	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.4526.1.1.11.16`
configNetMask mandatory The network mask for the RDU box.	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.4526.1.1.11.17`
configGateway mandatory The Gatway Address for the unit.	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.4526.1.1.11.18`
configSave mandatory Physically saves the current configuration to nvram. - use with care. (1) saves the configuration (2) does nothing.	scalar	Enumeration	`.1.3.6.1.4.1.4526.1.1.11.19`
configVerHwChipSet mandatory The hardware chipset version string	scalar	OctetString	`.1.3.6.1.4.1.4526.1.1.11.2`
configVerBootRomImage mandatory The Boot ROM version string	scalar	OctetString	`.1.3.6.1.4.1.4526.1.1.11.21`
configRestoreDefaults mandatory Restores the configuration of the unit to the original settings.	scalar	Enumeration	`.1.3.6.1.4.1.4526.1.1.11.22`
configIGMPOnOff mandatory Enable or disable the IGMP protocol within the switch.	scalar	Enumeration	`.1.3.6.1.4.1.4526.1.1.11.23`
configWebOnOff mandatory Enable or disable the Web Interface.	scalar	Enumeration	`.1.3.6.1.4.1.4526.1.1.11.24`
configHighPriorityOptimization mandatory Enable or disable high priority optimization.	scalar	Enumeration	`.1.3.6.1.4.1.4526.1.1.11.25`
configUserAuthenticationMode mandatory Determines whether the user password will be authenticated by the switch, a remote RADIUS server, or some combination of the two.	scalar	Enumeration	`.1.3.6.1.4.1.4526.1.1.11.27`
configRadiusServerIpAddress mandatory The IP Address of the RADIUS server used for remote user authentication.	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.4526.1.1.11.28`
configRadiusSharedSecret mandatory A string of characters used in the RADIUS password encryption process.	scalar	OctetString	`.1.3.6.1.4.1.4526.1.1.11.29`
configBootMode mandatory Defines the method used for downloading the image when reset.	scalar	Enumeration	`.1.3.6.1.4.1.4526.1.1.11.3`
configTelnetConsole mandatory Enable or disable the telnet console.	scalar	Enumeration	`.1.3.6.1.4.1.4526.1.1.11.30`
configTftpServerIpAddress mandatory The IP Address of the tftp server used to upload and download configuration files. This object is to be used in conjunction with configTftpServerFileName and configTftpOperation.	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.4526.1.1.11.32`
configTftpServerFileName mandatory The filename, including the path, used to store or retrieve a configuration file from the tftp server. This object is to be used in conjunction with configTftpServerIpAddress an…	scalar	OctetString	`.1.3.6.1.4.1.4526.1.1.11.33`
configTftpOperation mandatory The tftp operation to perform. Either download a configuration to the unit or upload the current configuration to the tftp server. This object is to be used in conjunction with …	scalar	Enumeration	`.1.3.6.1.4.1.4526.1.1.11.34`
configIpFilter mandatory Determines if access to the device is limited to only those IP addresses specified in the configIpFilterTable.	scalar	Enumeration	`.1.3.6.1.4.1.4526.1.1.11.35`
configIpFilterTable mandatory A list of IP addresses allowed access to this device.	table	-	`.1.3.6.1.4.1.4526.1.1.11.36`
configUserName mandatory The users login Id.	scalar	OctetString	`.1.3.6.1.4.1.4526.1.1.11.37`
configPasswordProtection mandatory Determines if a user must login before gaining access to the device.	scalar	Enumeration	`.1.3.6.1.4.1.4526.1.1.11.38`
configPasswordEncryption mandatory Determines when the password is written to the configuration file whether it is written as clear text or encrypted format.	scalar	Enumeration	`.1.3.6.1.4.1.4526.1.1.11.39`
configBootFtpServerIp mandatory The FTP server's IP address used for downloading the boot image	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.4526.1.1.11.4`
configAuthServerIpAddress mandatory The IP Address of the server used for 802.1x authentication.	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.4526.1.1.11.40`
configAuthServerSharedSecret mandatory A string of characters used in the RADIUS password encryption process by 802.1x authentication.	scalar	OctetString	`.1.3.6.1.4.1.4526.1.1.11.41`
configBootImageFileName mandatory The path and filename of the boot image to download	scalar	OctetString	`.1.3.6.1.4.1.4526.1.1.11.5`
configPortTable mandatory A list of interface entries used for enterprise specific configuration. The number of entries is given by the value of ifNumber. All interface entries are assumed to be Ethernet…	table	-	`.1.3.6.1.4.1.4526.1.1.11.6`
configMirroringOnOff mandatory Enable or disable port mirroring.	scalar	Enumeration	`.1.3.6.1.4.1.4526.1.1.11.8`
configMirrorSrc mandatory When mirroring is enabled (configMirroringOnOff = enabled), this identifies the mirroring source port. This value has a valid range of 1 to ifNumber when enbaled.	scalar	Integer32	`.1.3.6.1.4.1.4526.1.1.11.9`

Child Objects