syncE
FS-SWITCH-MIB ·
.1.3.6.1.4.1.27975.81
Object
node
No description available.
Context
- MIB
- FS-SWITCH-MIB
- OID
.1.3.6.1.4.1.27975.81- Type
- node
- Parent
- switch
- Siblings
- 67
- Children
- 15
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| system | node | - | .1.3.6.1.4.1.27975.1 |
| linkAgg | node | - | .1.3.6.1.4.1.27975.10 |
| l2protocol | node | - | .1.3.6.1.4.1.27975.100 |
| loopbackDetect | node | - | .1.3.6.1.4.1.27975.105 |
| ipsla | node | - | .1.3.6.1.4.1.27975.106 |
| qBridgeExt | node | - | .1.3.6.1.4.1.27975.11 |
| dot1xExt | node | - | .1.3.6.1.4.1.27975.12 |
| timeRange | node | - | .1.3.6.1.4.1.27975.13 |
| stpExt | node | - | .1.3.6.1.4.1.27975.14 |
| igmpExt | node | - | .1.3.6.1.4.1.27975.16 |
| boardHealthyMonitor | node | - | .1.3.6.1.4.1.27975.17 |
| syslog | node | - | .1.3.6.1.4.1.27975.2 |
| arpInsp | node | - | .1.3.6.1.4.1.27975.20 |
| pimsmExt | node | - | .1.3.6.1.4.1.27975.21 |
| ospfExt | node | - | .1.3.6.1.4.1.27975.22 |
| mirror | node | - | .1.3.6.1.4.1.27975.3 |
| user | node | - | .1.3.6.1.4.1.27975.30 |
| snmpExt | node | - | .1.3.6.1.4.1.27975.32 |
| stm | node | - | .1.3.6.1.4.1.27975.33 |
| dnsClient | node | - | .1.3.6.1.4.1.27975.34 |
| ssh | node | - | .1.3.6.1.4.1.27975.35 |
| dhcp | node | - | .1.3.6.1.4.1.27975.36 |
| lswdevMMib | node | - | .1.3.6.1.4.1.27975.37 |
| lswTrapMib | node | - | .1.3.6.1.4.1.27975.39 |
| portSecurity | node | - | .1.3.6.1.4.1.27975.4 |
| ipSourceGuard | node | - | .1.3.6.1.4.1.27975.40 |
| vrrpExt | node | - | .1.3.6.1.4.1.27975.41 |
| interface | node | - | .1.3.6.1.4.1.27975.42 |
| management | node | - | .1.3.6.1.4.1.27975.43 |
| mvr | node | - | .1.3.6.1.4.1.27975.44 |
| erps | node | - | .1.3.6.1.4.1.27975.45 |
| prefixList | node | - | .1.3.6.1.4.1.27975.46 |
| ipUnicast | node | - | .1.3.6.1.4.1.27975.47 |
| aaa | node | - | .1.3.6.1.4.1.27975.49 |
| stormControl | node | - | .1.3.6.1.4.1.27975.5 |
| evc | node | - | .1.3.6.1.4.1.27975.51 |
| qinq | node | - | .1.3.6.1.4.1.27975.52 |
| rmonExt | node | - | .1.3.6.1.4.1.27975.53 |
| ntp | node | - | .1.3.6.1.4.1.27975.6 |
| ldpExt | node | - | .1.3.6.1.4.1.27975.60 |
| bgp | node | - | .1.3.6.1.4.1.27975.68 |
| mpls | node | - | .1.3.6.1.4.1.27975.69 |
| acl | node | - | .1.3.6.1.4.1.27975.7 |
| smartlink | node | - | .1.3.6.1.4.1.27975.70 |
| flowctrl | node | - | .1.3.6.1.4.1.27975.71 |
| cputraffic | node | - | .1.3.6.1.4.1.27975.72 |
| portisolate | node | - | .1.3.6.1.4.1.27975.73 |
| phyloopback | node | - | .1.3.6.1.4.1.27975.74 |
| monitorlink | node | - | .1.3.6.1.4.1.27975.75 |
| udld | node | - | .1.3.6.1.4.1.27975.76 |
| policyBasedRouting | node | - | .1.3.6.1.4.1.27975.77 |
| ddos | node | - | .1.3.6.1.4.1.27975.78 |
| l2ping | node | - | .1.3.6.1.4.1.27975.79 |
| qos | node | - | .1.3.6.1.4.1.27975.8 |
| arpConfig | node | - | .1.3.6.1.4.1.27975.82 |
| cfm | node | - | .1.3.6.1.4.1.27975.83 |
| efm | node | - | .1.3.6.1.4.1.27975.84 |
| ptp | node | - | .1.3.6.1.4.1.27975.85 |
| igsp | node | - | .1.3.6.1.4.1.27975.9 |
| pm | node | - | .1.3.6.1.4.1.27975.90 |
| alarm | node | - | .1.3.6.1.4.1.27975.91 |
| rsvpTe | node | - | .1.3.6.1.4.1.27975.92 |
| g8031 | node | - | .1.3.6.1.4.1.27975.93 |
| g8032 | node | - | .1.3.6.1.4.1.27975.94 |
| voiceVlan | node | - | .1.3.6.1.4.1.27975.95 |
| ivi | node | - | .1.3.6.1.4.1.27975.96 |
| product | node | - | .1.3.6.1.4.1.27975.99 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| syncEDeviceClockID A exclusive flag to distinguish every device | scalar | OctetString | .1.3.6.1.4.1.27975.81.1 |
| syncEClockState Get the device clock status.
The meanings of the values are:
master-clock(1) - Master-only device
affords time signal;
freerun(2) - Device has not been … | scalar | Enumeration | .1.3.6.1.4.1.27975.81.10 |
| syncENotifications | node | - | .1.3.6.1.4.1.27975.81.100 |
| syncEOptionMode Get the device clock ssm option mode.
op1(1) - Option mode 1;
op2(2) - Option mode 2 | scalar | Enumeration | .1.3.6.1.4.1.27975.81.11 |
| syncESwitchForceIF Switch time resource to one interface forcibaly.
The value is the ifindex.
Value 0 cancles configuration | scalar | Integer32 | .1.3.6.1.4.1.27975.81.12 |
| syncEIfTable Table of ssm interface entry. | table | - | .1.3.6.1.4.1.27975.81.13 |
| syncEClockRecoverySelect Set the way to recovery clock.
The meanings of the values are:
synce(1) - Set syncE to recovery clock;
bits1(2) - Set bits1 to recovery clock;
bits2(3) - Set bits2 to recov… | scalar | Enumeration | .1.3.6.1.4.1.27975.81.15 |
| syncEGlbEnable Set whether the device is a synchronous equipment.
The meanings of the values are:
enable(1) - A synchronous equipment;
disable(2) - Not a synchronous equipment | scalar | Enumeration | .1.3.6.1.4.1.27975.81.2 |
| syncESsmGlbEnable Set whether the device work under synchronous
operation mode. The meanings of the values are:
enable(1) - Under synchronous operation mode;
disable(2) - Under non-sync operati… | scalar | Enumeration | .1.3.6.1.4.1.27975.81.3 |
| syncEDeviceType Set the device type. The meanings of the values are:
master-olny(1) - master-only type;
slave-only(2) - slave-only type;
none(3) - default type | scalar | Enumeration | .1.3.6.1.4.1.27975.81.4 |
| syncELocalQuality Set the device quality globally under option1.
The meanings of the values are:
op2-prs(1) - Primary reference source;
op1-prc(2) - Primary reference clock;
op2-eec2(3) - EEC2… | scalar | Enumeration | .1.3.6.1.4.1.27975.81.5 |
| syncELockedQuality Get the locked quality.The meanings of the values are:
prs(1) - PRS traceable (ITU-T G.811);
prc(2) - Primary reference clock;
stu(3) - Synchronized Ƀ Traceability unknow… | scalar | Enumeration | .1.3.6.1.4.1.27975.81.6 |
| syncELocalPriority Set the device priority globally.
The range is 1 ~ 255 | scalar | Integer32 | .1.3.6.1.4.1.27975.81.7 |
| syncESelectedInterface Get ifindex of the current selected port.
0 means no interface is selected. | scalar | Integer32 | .1.3.6.1.4.1.27975.81.8 |
| syncEExtensionEnable Set whether the device start extend ssm.
The meanings of the values are:
enable(1) - Start extend ssm;
disable(2) - Not start extend ssm | scalar | Enumeration | .1.3.6.1.4.1.27975.81.9 |