nmsifthThresholdType

FS-NMS-IF-THRESHOLD-MIB · .1.3.6.1.4.1.52642.9.218.1.1.5.1.5

Object

column r/w Enumeration

The manner in which to compare nmsifthThresholdObject to
nmsifthThresholdFiredValue and nmsifthThresholdClearedValue.
              
The value 'absoluteValue' indicates that the value of
nmsifthThresholdObject is to be compared directly to
nmsifthThresholdFiredValue or nmsifthThresholdClearedValue.
              
The value 'deltaValue' indicates that the difference between
two successive samples of nmsifthThresholdObject is to be
compared to nmsifthThresholdFiredValue or
nmsifthThresholdClearedValue.  The polling interval between
successive samples is defined in nmsifthThresholdSampleInterval.
              
The value 'rateOfIncreaseExponentXIfSpeed' indicates that the
rate of increase of nmsifthThresholdObject is to be compared to
the negated value of nmsifthThresholdFiredValue used as the
exponent of 10, times the value of ifSpeed (if the value of
ifSpeed is less than the maximum value) or ifHighSpeed
(otherwise).  For example, a value of nmsifthThresholdFiredValue
of 5 on a gigabit ethernet interface indicates a threshold of
10^-5 times the interface speed, which is equal to 10,000 per
second.  When the value of this object is
'rateOfIncreaseExponentXIfSpeed', the polling interval between
successive samples is determined automatically by the agent.
              
When the object identified by nmsifthThresholdObject is a
counter, a threshold type of 'deltaValue' or
'rateOfIncreaseExponentXIfSpeed' should be used.  When the
object identified by nmsifthThresholdObject is not a counter, a
threshold type of 'absoluteValue' should be used.

Context

MIB: FS-NMS-IF-THRESHOLD-MIB
OID: .1.3.6.1.4.1.52642.9.218.1.1.5.1.5
Type: column
Access: readwrite
Status: current
Parent: nmsifthThresholdEntry
Table: nmsifthThresholdTable
Siblings: 10

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	absoluteValue
`2`	deltaValue
`3`	rateOfIncreaseExponentXIfSpeed

Related Objects

Sibling Objects

Object	Type	Syntax	OID
nmsifthThresholdIndex An arbitrary integer that uniquely identifies a threshold in a threshold template. The value for each threshold must remain constant when the agent's network management system is…	column	NMSifthThresholdIndex	`.1.3.6.1.4.1.52642.9.218.1.1.5.1.1`
nmsifthThresholdApsSwitchover This object indicates whether automatic protection switching (APS) switchover should be triggered, if applicable, when the threshold is fired. The value of this object takes effe…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.52642.9.218.1.1.5.1.10`
nmsifthThresholdRowStatus This object is used to create and delete thresholds in templates. A new entry can only be created when there is an active entry in the nmsifthTemplateTable with the…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.52642.9.218.1.1.5.1.11`
nmsifthThresholdDescr A description of the threshold's function and use. The description must not include carriage returns.	column	OctetString	`.1.3.6.1.4.1.52642.9.218.1.1.5.1.2`
nmsifthThresholdObject The object to be compared against the threshold values. The object must be defined in a table indexed only by ifIndex. All of the instance portion of the object identifier is trun…	column	ObjectIdentifier	`.1.3.6.1.4.1.52642.9.218.1.1.5.1.3`
nmsifthThresholdSeverity This object specifies the severity associated with the condition when the threshold is exceeded.	column	NMSifthThresholdSeverity	`.1.3.6.1.4.1.52642.9.218.1.1.5.1.4`
nmsifthThresholdDirection This object indicates which direction of movement causes the threshold to fire. The value 'rising' indicates that the threshold is fired when the current sampled va…	column	Enumeration	`.1.3.6.1.4.1.52642.9.218.1.1.5.1.6`
nmsifthThresholdFiredValue A threshold value to check against the object identified in nmsifthThresholdObject. If the value of nmsifthThresholdDirection is 'rising', then the threshold is fired when the cu…	column	Integer32	`.1.3.6.1.4.1.52642.9.218.1.1.5.1.7`
nmsifthThresholdClearedValue A threshold value to check against the object identified in nmsifthThresholdObject. If the value of nmsifthThresholdDirection is 'rising', then the threshold is cleared when the …	column	Integer32	`.1.3.6.1.4.1.52642.9.218.1.1.5.1.8`
nmsifthThresholdSampleInterval The number of milliseconds to wait between samples of the object identified in nmsifthThresholdObject. To encourage consistency in sampling, the interval is measured from the beg…	column	milliseconds Unsigned32	`.1.3.6.1.4.1.52642.9.218.1.1.5.1.9`