nmsifthThresholdFiredValue
FS-NMS-IF-THRESHOLD-MIB ·
.1.3.6.1.4.1.52642.9.218.1.1.5.1.7
Object
column
r/w
Integer32
A threshold value to check against the object identified in nmsifthThresholdObject. If the value of nmsifthThresholdDirection is 'rising', then the threshold is fired when the current sampled value (absolute, delta, or rate of increase, depending on the value of nmsifthThresholdType) of the object identified in nmsifthThresholdObject is greater than or equal to this value. If the value of nmsifthThresholdDirection is 'falling', then the threshold is fired when the current sampled value (absolute, delta, or rate of increase, depending on the value of nmsifthThresholdType) of the object identified in nmsifthThresholdObject is less than or equal to this value.
Context
- MIB
- FS-NMS-IF-THRESHOLD-MIB
- OID
.1.3.6.1.4.1.52642.9.218.1.1.5.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- nmsifthThresholdEntry
- Table
- nmsifthThresholdTable
- Siblings
- 10
Syntax
Integer32
Values & Constraints
Object Constraints
range: -2147483648-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nmsifthThresholdIndex An arbitrary integer that uniquely identifies a threshold in
a threshold template. The value for each threshold must remain
constant when the agent's network management system is… | column | NMSifthThresholdIndex | .1.3.6.1.4.1.52642.9.218.1.1.5.1.1 |
| nmsifthThresholdApsSwitchover This object indicates whether automatic protection switching
(APS) switchover should be triggered, if applicable, when the
threshold is fired. The value of this object takes effe… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.52642.9.218.1.1.5.1.10 |
| nmsifthThresholdRowStatus This object is used to create and delete thresholds in
templates.
A new entry can only be created when there is an active entry
in the nmsifthTemplateTable with the… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.52642.9.218.1.1.5.1.11 |
| nmsifthThresholdDescr A description of the threshold's function and use. The
description must not include carriage returns. | column | OctetString | .1.3.6.1.4.1.52642.9.218.1.1.5.1.2 |
| nmsifthThresholdObject The object to be compared against the threshold values.
The object must be defined in a table indexed only by ifIndex.
All of the instance portion of the object identifier is
trun… | column | ObjectIdentifier | .1.3.6.1.4.1.52642.9.218.1.1.5.1.3 |
| nmsifthThresholdSeverity This object specifies the severity associated with the
condition when the threshold is exceeded. | column | NMSifthThresholdSeverity | .1.3.6.1.4.1.52642.9.218.1.1.5.1.4 |
| nmsifthThresholdType The manner in which to compare nmsifthThresholdObject to
nmsifthThresholdFiredValue and nmsifthThresholdClearedValue.
The value 'absoluteValue' indicates that the v… | column | Enumeration | .1.3.6.1.4.1.52642.9.218.1.1.5.1.5 |
| nmsifthThresholdDirection This object indicates which direction of movement causes the
threshold to fire.
The value 'rising' indicates that the threshold is fired when
the current sampled va… | column | Enumeration | .1.3.6.1.4.1.52642.9.218.1.1.5.1.6 |
| nmsifthThresholdClearedValue A threshold value to check against the object identified in
nmsifthThresholdObject. If the value of nmsifthThresholdDirection
is 'rising', then the threshold is cleared when the … | column | Integer32 | .1.3.6.1.4.1.52642.9.218.1.1.5.1.8 |
| nmsifthThresholdSampleInterval The number of milliseconds to wait between samples of the
object identified in nmsifthThresholdObject. To encourage
consistency in sampling, the interval is measured from the
beg… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.52642.9.218.1.1.5.1.9 |