fsMplsOamIgrEntry

FS-MPLSOAM-MIB · .1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1

MIB view Table view

Object

row

A row in this table represents information for configuring
and monitoring LSP(or te tunnel). It is indexed by
fsMplsOamIgrIndex, which uniquely identifies a single LSP(or te tunnel).

Context

MIB: FS-MPLSOAM-MIB
OID: .1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1
Type: row
Status: current
Parent: fsMplsOamIgrTable
Table: fsMplsOamIgrTable
Children: 12

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
fsMplsOamIgrIndex This is a unique index in the ingress table.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.1`
fsMplsOamIgrAvaState If the LSP Timer (T3) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to be at the entry into the LSP defect state. An LSP…	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.10`
fsMplsOamIgrDefectType There are 6 types of defect in total, among which there are 4 MPLS layer user-plane defects(i.e., dLOCV, dTTSI_Mismatch, dTTSI_Mismerge and dExcess), 1 Server layer defect, 1 peer…	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.11`
fsMplsOamIgrRowStatus It is used to create and delete a row in this table.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.12`
fsMplsOamIgrLspName The name of an LSP(or te tunnel).	column	OctetString	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.2`
fsMplsOamIgrLspId The ID of an LSP.	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.3`
fsMplsOamIgrDetType The OAM defect detection function is based on the periodic transmission of CV or FFD packets from ingress to egress of an LSP. Each CV and FFD packet carries a unique TTSI (Trai…	column	Enumeration	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.4`
fsMplsOamIgrDetFreq For CV: the frequency is 1s. For FFD: the frequency is one of 50ms,100ms,200ms,500ms. 0: 1s(only for cv); 1: 50ms; 2: 100ms; 3: 200ms; 4: 500ms.	column	Enumeration	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.5`
fsMplsOamIgrRevType The BDI flow is injected on a return path (such as a return LSP) to inform the upstream LSR (which is the source of the forward LSP) that there is a defect at the downstream LSP's…	column	Enumeration	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.6`
fsMplsOamIgrRevLspName The name of a return LSP.	column	OctetString	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.7`
fsMplsOamIgrEnable The detection of OAM is enabled/disabled on the ingress of an LSP. 0: The OAM detection is disabled on the ingress; 1: The OAM detection is enabled on the ingress.	column	Enumeration	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.8`
fsMplsOamIgrValid 0: stop detection of OAM; 1: start detection of OAM.	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.9`

Indexes