fsMplsOamEgrAvaState
FS-MPLSOAM-MIB ·
.1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.14
Object
column
Integer32
If the LSP Timer (T1) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to be at the entry into the LSP defect state. An LSP re-enters the Available state after the LSP Defect State. first exists. T1 defines the length of time the LSP is in the Defect state before declaring an LSP Unavailable or returning to defect free state 0: available state; 1: unavailable state.
Context
- MIB
- FS-MPLSOAM-MIB
- OID
.1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fsMplsOamEgrEntry
- Table
- fsMplsOamEgrTable
- Siblings
- 15
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-1
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMplsOamEgrIndex This is a unique index in the egress table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.1 |
| fsMplsOamEgrAutoOvertime The wait-time of adaptability. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.10 |
| fsMplsOamEgrBDIFreq For CV: the frequency is 1s.
For FFD: the frequency is one of
50ms,100ms,200ms,500ms.
0: 1000ms(only for cv);
1: 50ms;
2: 100ms;
3: 200ms;
4: 500ms. | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.11 |
| fsMplsOamEgrEnable The detection of OAM is enabled/disabled on the egress of an LSP.
0: The OAM detection is disabled on the egress;
1: The OAM detection is enabled on the egress. | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.12 |
| fsMplsOamEgrValid 1: stop detection of OAM;
2: start detection of OAM. | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.13 |
| fsMplsOamEgrDefectType There are 6 types of defect in total, among which there are 4 MPLS layer user-plane
defects(i.e., dLOCV, dTTSI_Mismatch, dTTSI_Mismerge and dExcess), 1 Server layer defect,
1 peer… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.15 |
| fsMplsOamEgrRowStatus It is used to create and
delete a row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.16 |
| fsMplsOamEgrLspName The name of static LSP at egress. | column | OctetString | .1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.2 |
| fsMplsOamEgrLsrId The Ingress LSR ID of an LSP. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.3 |
| fsMplsOamEgrLspId The ID of an LSP. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.4 |
| fsMplsOamEgrDetType 0: adaptability;
1: CV;
2: FFD. | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.5 |
| fsMplsOamEgrDetFreq 0: 1000ms(only for cv);
1: 50ms;
2: 100ms;
3: 200ms;
4: 500ms;
5: invalid. | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.6 |
| fsMplsOamEgrRevType The BDI flow is injected on a return path (such as a return LSP) to inform the upstream LSR
(which is the source of the forward LSP) that there is a defect at the downstream LSP's… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.7 |
| fsMplsOamEgrRevLspName The name of a return LSP. | column | OctetString | .1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.8 |
| fsMplsOamEgrAutoEn The adaptability is enabled/disabled.
0: disable;
1: enable. | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.9 |