nnmfrClass
FR-MIB ·
.1.3.6.1.4.1.562.73.1.1.1.16.1.1.14
Object
column
r/w
Enumeration
classA -- bundle is UP when 1 link is UP
classB -- bundle is UP when all links are UP
classC -- bundle is UP when user-specific # of links
are UP.
In the case of classC, mfrClassThreshold should be
configured with mfrClass in an atomic set operation.
This variable can be set on a multilink bundle but
not on a uni link bundle.
Context
- MIB
- FR-MIB
- OID
.1.3.6.1.4.1.562.73.1.1.1.16.1.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- nnfrTableEntry
- Table
- nnfrTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | classA |
2 | classB |
3 | classC |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nnfrIfEnable Enables or disables the frame-relay interface. By
default frame- relay interface is enabled. Writing
zero (0) disables frame-relay interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.562.73.1.1.1.16.1.1.1 |
| nnfrLmiDteN391 DTE/UNI full status polling interval. Ranges from 1
to 255, with a default value of 6. To configure the
value of this variable, LMI type should be configured. | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.1.16.1.1.10 |
| nnfrLmiKeepalive Local management interface keepalive polling interval
time in seconds. The value for this ranges from 5
seconds to 255 seconds with a default value of 10
seconds. To configure t… | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.1.16.1.1.11 |
| nnmfrAckMsgTimer The time to wait for an ADD_LINK_ACK message
before timing out. | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.1.16.1.1.12 |
| nnmfrAckMsgMaxRetry Maximum number of Retries for the Ack Msg. This
variable can be set on a multilink bundle. | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.1.16.1.1.13 |
| nnmfrClassThreshold Threshold - minimum number of links required to
activate bundle, for a mfrClass, classC. This
variable can be set on a multilink bundle but not
on a uni link bundle. | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.1.16.1.1.15 |
| nnmfrFrameSize The frame size for multi-link frame relay. This
variable can be set on a multilink bundle but not
on a uni link bundle. | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.1.16.1.1.16 |
| nnmfrHelloTimer Hello timer in seconds. This variable can be set
on a multilink bundle but not on a uni link bundle. | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.1.16.1.1.17 |
| nnmfrSegThreshold Segment threshold packet size in bytes. This variable
can be set on a multilink bundle but not on a uni link
bundle. | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.1.16.1.1.18 |
| nnmfrDiffDelay Differential delay in milli seconds. This variable
can be set on a multilink bundle but not on a uni
link bundle. | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.1.16.1.1.19 |
| nnfrEnablePvcAll Enables all PVCs related to the interface. By default all
PVCs related to an interface are disabled. Writing One (1)
enables all PVCs at the same time for an interface indexed
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.562.73.1.1.1.16.1.1.2 |
| nnfrFrameSize Maximum Size of the frame that will be configured for
this Frame Relay interface. The value for frame size
ranges from 56 to 4096 bytes, with a default value of
1600 bytes. | column | bytes Integer32 | .1.3.6.1.4.1.562.73.1.1.1.16.1.1.3 |
| nnfrIfType Indicates the interface type for the frame-relay
interface. | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.16.1.1.4 |
| nnfrLmiType Local management Interface type for the frame-relay
interface.
It can take any of the following three values:
ansi - ANSI T1.617 (Annex D),
cisco - Cisco LMI,
q933a - ITU-T Q.9… | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.16.1.1.5 |
| nnfrLmiDceN392 DCE/UNI error threshold value. Ranges from 1 to 10,
with a default value of 9. To configure the value
of this variable, LMI type should be configured. | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.1.16.1.1.6 |
| nnfrLmiDceN393 DCE/UNI monitored events count. Ranges from 1 to 10,
with a default value of 10. To configure the value
of this variable, LMI type should be configured. | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.1.16.1.1.7 |
| nnfrLmiDteN392 DTE/UNI error threshold. Ranges from 1 to 10, with a
default value of 9. To configure the value of this
variable, LMI type should be configured. | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.1.16.1.1.8 |
| nnfrLmiDteN393 DTE/UNI monitored events count. Ranges from 1 to 10,
with a default value of 10. To configure the value
of this variable, LMI type should be configured. | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.1.16.1.1.9 |