nnfrFrameSize

FR-MIB · .1.3.6.1.4.1.562.73.1.1.1.16.1.1.3

MIB view Table view

Object

column r/w bytes Integer32

Maximum Size of the frame that will be configured for 
this Frame Relay interface. The value for frame size 
ranges from 56 to 4096 bytes, with a default value of
1600 bytes.

Context

MIB: FR-MIB
OID: .1.3.6.1.4.1.562.73.1.1.1.16.1.1.3
Type: column
Access: readwrite
Status: current
Units: bytes
Parent: nnfrTableEntry
Table: nnfrTable
Siblings: 18

Syntax

bytes Integer32

Values & Constraints

Object Constraints

range: 56-4096

Related Objects

Sibling Objects

Object	Type	Syntax	OID
nnfrIfEnable Enables or disables the frame-relay interface. By default frame- relay interface is enabled. Writing zero (0) disables frame-relay interface.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.562.73.1.1.1.16.1.1.1`
nnfrLmiDteN391 DTE/UNI full status polling interval. Ranges from 1 to 255, with a default value of 6. To configure the value of this variable, LMI type should be configured.	column	Integer32	`.1.3.6.1.4.1.562.73.1.1.1.16.1.1.10`
nnfrLmiKeepalive Local management interface keepalive polling interval time in seconds. The value for this ranges from 5 seconds to 255 seconds with a default value of 10 seconds. To configure t…	column	Integer32	`.1.3.6.1.4.1.562.73.1.1.1.16.1.1.11`
nnmfrAckMsgTimer The time to wait for an ADD_LINK_ACK message before timing out.	column	Integer32	`.1.3.6.1.4.1.562.73.1.1.1.16.1.1.12`
nnmfrAckMsgMaxRetry Maximum number of Retries for the Ack Msg. This variable can be set on a multilink bundle.	column	Integer32	`.1.3.6.1.4.1.562.73.1.1.1.16.1.1.13`
nnmfrClass classA -- bundle is UP when 1 link is UP classB -- bundle is UP when all links are UP classC -- bundle is UP when user-specific # of links are UP. In the case of c…	column	Enumeration	`.1.3.6.1.4.1.562.73.1.1.1.16.1.1.14`
nnmfrClassThreshold Threshold - minimum number of links required to activate bundle, for a mfrClass, classC. This variable can be set on a multilink bundle but not on a uni link bundle.	column	Integer32	`.1.3.6.1.4.1.562.73.1.1.1.16.1.1.15`
nnmfrFrameSize The frame size for multi-link frame relay. This variable can be set on a multilink bundle but not on a uni link bundle.	column	Integer32	`.1.3.6.1.4.1.562.73.1.1.1.16.1.1.16`
nnmfrHelloTimer Hello timer in seconds. This variable can be set on a multilink bundle but not on a uni link bundle.	column	Integer32	`.1.3.6.1.4.1.562.73.1.1.1.16.1.1.17`
nnmfrSegThreshold Segment threshold packet size in bytes. This variable can be set on a multilink bundle but not on a uni link bundle.	column	Integer32	`.1.3.6.1.4.1.562.73.1.1.1.16.1.1.18`
nnmfrDiffDelay Differential delay in milli seconds. This variable can be set on a multilink bundle but not on a uni link bundle.	column	Integer32	`.1.3.6.1.4.1.562.73.1.1.1.16.1.1.19`
nnfrEnablePvcAll Enables all PVCs related to the interface. By default all PVCs related to an interface are disabled. Writing One (1) enables all PVCs at the same time for an interface indexed …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.562.73.1.1.1.16.1.1.2`
nnfrIfType Indicates the interface type for the frame-relay interface.	column	Enumeration	`.1.3.6.1.4.1.562.73.1.1.1.16.1.1.4`
nnfrLmiType Local management Interface type for the frame-relay interface. It can take any of the following three values: ansi - ANSI T1.617 (Annex D), cisco - Cisco LMI, q933a - ITU-T Q.9…	column	Enumeration	`.1.3.6.1.4.1.562.73.1.1.1.16.1.1.5`
nnfrLmiDceN392 DCE/UNI error threshold value. Ranges from 1 to 10, with a default value of 9. To configure the value of this variable, LMI type should be configured.	column	Integer32	`.1.3.6.1.4.1.562.73.1.1.1.16.1.1.6`
nnfrLmiDceN393 DCE/UNI monitored events count. Ranges from 1 to 10, with a default value of 10. To configure the value of this variable, LMI type should be configured.	column	Integer32	`.1.3.6.1.4.1.562.73.1.1.1.16.1.1.7`
nnfrLmiDteN392 DTE/UNI error threshold. Ranges from 1 to 10, with a default value of 9. To configure the value of this variable, LMI type should be configured.	column	Integer32	`.1.3.6.1.4.1.562.73.1.1.1.16.1.1.8`
nnfrLmiDteN393 DTE/UNI monitored events count. Ranges from 1 to 10, with a default value of 10. To configure the value of this variable, LMI type should be configured.	column	Integer32	`.1.3.6.1.4.1.562.73.1.1.1.16.1.1.9`