nnfrAvcTableEntry
FR-MIB ·
.1.3.6.1.4.1.562.73.1.1.1.16.5.1
Object
row
avc parameter entries are listed in this table.
Context
- MIB
- FR-MIB
- OID
.1.3.6.1.4.1.562.73.1.1.1.16.5.1- Type
- row
- Status
- current
- Parent
- nnfrAvcTable
- Table
- nnfrAvcTable
- Children
- 17
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nnfrAvcId frAvcId is the identifier of an avc. To
configure an avc, this parameter must be
used as the index. This is assigned internally
by the system. Whenever a row creation
needs to… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.16.5.1.1 |
| nnfrAvcSegThreshold Segment threshold packet size in bytes. This value defines
the minimum size of any fragment that can be transmitted on
any cvc. Frames smaller than this size must not be fragmente… | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.1.16.5.1.10 |
| nnfrAvcSequence multilink frame relay sequence number length (short = 12 bits ; long =
24 bits.24 bit sequence space increases MFR header by 2 more bytes, but
in those situations where the diffe… | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.16.5.1.11 |
| nnfrAvcDiffDelay Differential delay in milli seconds. This variable
can be set only when the AVC is in Enhanced FRF.15
mode. This value indicates the maximum tolerable differential
delay between … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.16.5.1.12 |
| nnfrAvcEnhancedMode Enhanced FRF.15 mode is a modification of the standard FRF.15 to
improve the end to end CVC status integrity and to calculate and act on
differential delay build up. By default, t… | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.16.5.1.13 |
| nnfrAvcNoOfCvcs Indicates the number of links configured in
the avc. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.16.5.1.14 |
| nnfrAvcTotalBw Indicates the total bandwidth for this avc.
The avc bandwidth is the aggregated band-
widths of all the links assigned to a
particular avc. | column | kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.16.5.1.15 |
| nnfrAvcEnable Enables the AVC. By default AVC is enabled.
Writing one(1) on this enables AVC, zero(0)
disables it. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.562.73.1.1.1.16.5.1.16 |
| nnfrAvcRowStatus frAvcRowStatus is used to add/delete a row
in the table. Adding or deleting a row
corresponds to creating an avc or deleting
an avc. In order to add a row to the avc
table, a … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.562.73.1.1.1.16.5.1.17 |
| nnfrAvcDlci Data Link Connection Identifier of the avc. The value
ranges from 16 to 1022. This number is unique across
all the avcs created. Once set during creation,
it can't be changed. | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.1.16.5.1.2 |
| nnfrAvcName Name of the avc. To configure an avc,
this parameter must be set. That is, a
descriptive name should be given to an avc.
The maximum length of an avc name is 8
characters. Thi… | column | OctetString | .1.3.6.1.4.1.562.73.1.1.1.16.5.1.3 |
| nnfrAvcIpAddr The avc's source IP address. This is one
of the parameters required to set up IP
multiplexing for an avc. Also the parameters
avcIpAddr and avcSubnetMask have to be set
togethe… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.562.73.1.1.1.16.5.1.4 |
| nnfrAvcIpSubnetMask This parameter represents the source subnet
mask address. This is one of the parameters
required to set up IP multiplexing for a
avc. This parameter is set along with the
avcI… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.562.73.1.1.1.16.5.1.5 |
| nnfrAvcRemoteIpAddr Remote IP address to be mapped for the avc. If configured,
the arp table is updated with this static entry and
inverse arp request packets are no longer sent for this
interface.To… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.562.73.1.1.1.16.5.1.6 |
| nnfrAvcClass classA -- avc is UP when at least 1 cvc is UP
classB -- avc is UP when all cvcs are UP
classC -- avc is UP when user-specified # of cvcs are UP
classD -- avc is UP when user-s… | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.16.5.1.7 |
| nnfrAvcClassThreshold Threshold - minimum number of links required to
activate bundle, for the avcClass 'classC'. For
'classD' or 'classE', the value will be in bits per second.
For 'classA' and 'class… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.16.5.1.8 |
| nnfrAvcFragmentSize The frame size for multi-link frame relay End-to-End avc in
bytes. This value defines the maximum size of any fragment
that can be transmitted on any cvc. Frames larger than th… | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.1.16.5.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| nnfrAvcId frAvcId is the identifier of an avc. To
configure an avc, this parameter must be
used as the index. This is assigned internally
by the system. Whenever a row creation
needs to… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.16.5.1.1 |