nnfrAvcRemoteIpAddr

FR-MIB · .1.3.6.1.4.1.562.73.1.1.1.16.5.1.6

MIB view Table view

Object

column r/w SNMPv2-SMIIpAddress

Remote IP address to be mapped for the avc. If configured,
the arp table is updated with this static entry and
inverse arp request packets are no longer sent for this
interface.To unconfigure this parameter, a set operation
is performed with the value 0.0.0.0 .

Context

MIB: FR-MIB
OID: .1.3.6.1.4.1.562.73.1.1.1.16.5.1.6
Type: column
Access: readwrite
Status: current
Parent: nnfrAvcTableEntry
Table: nnfrAvcTable
Siblings: 16

Syntax

SNMPv2-SMIIpAddress

Source: SNMPv2-SMIIpAddress
Base type: OctetString

Values & Constraints

Type Constraints

range: 4

Related Objects

Sibling Objects

Object	Type	Syntax	OID
nnfrAvcId frAvcId is the identifier of an avc. To configure an avc, this parameter must be used as the index. This is assigned internally by the system. Whenever a row creation needs to…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.562.73.1.1.1.16.5.1.1`
nnfrAvcSegThreshold Segment threshold packet size in bytes. This value defines the minimum size of any fragment that can be transmitted on any cvc. Frames smaller than this size must not be fragmente…	column	Integer32	`.1.3.6.1.4.1.562.73.1.1.1.16.5.1.10`
nnfrAvcSequence multilink frame relay sequence number length (short = 12 bits ; long = 24 bits.24 bit sequence space increases MFR header by 2 more bytes, but in those situations where the diffe…	column	Enumeration	`.1.3.6.1.4.1.562.73.1.1.1.16.5.1.11`
nnfrAvcDiffDelay Differential delay in milli seconds. This variable can be set only when the AVC is in Enhanced FRF.15 mode. This value indicates the maximum tolerable differential delay between …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.562.73.1.1.1.16.5.1.12`
nnfrAvcEnhancedMode Enhanced FRF.15 mode is a modification of the standard FRF.15 to improve the end to end CVC status integrity and to calculate and act on differential delay build up. By default, t…	column	Enumeration	`.1.3.6.1.4.1.562.73.1.1.1.16.5.1.13`
nnfrAvcNoOfCvcs Indicates the number of links configured in the avc.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.562.73.1.1.1.16.5.1.14`
nnfrAvcTotalBw Indicates the total bandwidth for this avc. The avc bandwidth is the aggregated band- widths of all the links assigned to a particular avc.	column	kbps SNMPv2-SMIInteger32	`.1.3.6.1.4.1.562.73.1.1.1.16.5.1.15`
nnfrAvcEnable Enables the AVC. By default AVC is enabled. Writing one(1) on this enables AVC, zero(0) disables it.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.562.73.1.1.1.16.5.1.16`
nnfrAvcRowStatus frAvcRowStatus is used to add/delete a row in the table. Adding or deleting a row corresponds to creating an avc or deleting an avc. In order to add a row to the avc table, a …	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.562.73.1.1.1.16.5.1.17`
nnfrAvcDlci Data Link Connection Identifier of the avc. The value ranges from 16 to 1022. This number is unique across all the avcs created. Once set during creation, it can't be changed.	column	Integer32	`.1.3.6.1.4.1.562.73.1.1.1.16.5.1.2`
nnfrAvcName Name of the avc. To configure an avc, this parameter must be set. That is, a descriptive name should be given to an avc. The maximum length of an avc name is 8 characters. Thi…	column	OctetString	`.1.3.6.1.4.1.562.73.1.1.1.16.5.1.3`
nnfrAvcIpAddr The avc's source IP address. This is one of the parameters required to set up IP multiplexing for an avc. Also the parameters avcIpAddr and avcSubnetMask have to be set togethe…	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.562.73.1.1.1.16.5.1.4`
nnfrAvcIpSubnetMask This parameter represents the source subnet mask address. This is one of the parameters required to set up IP multiplexing for a avc. This parameter is set along with the avcI…	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.562.73.1.1.1.16.5.1.5`
nnfrAvcClass classA -- avc is UP when at least 1 cvc is UP classB -- avc is UP when all cvcs are UP classC -- avc is UP when user-specified # of cvcs are UP classD -- avc is UP when user-s…	column	Enumeration	`.1.3.6.1.4.1.562.73.1.1.1.16.5.1.7`
nnfrAvcClassThreshold Threshold - minimum number of links required to activate bundle, for the avcClass 'classC'. For 'classD' or 'classE', the value will be in bits per second. For 'classA' and 'class…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.562.73.1.1.1.16.5.1.8`
nnfrAvcFragmentSize The frame size for multi-link frame relay End-to-End avc in bytes. This value defines the maximum size of any fragment that can be transmitted on any cvc. Frames larger than th…	column	Integer32	`.1.3.6.1.4.1.562.73.1.1.1.16.5.1.9`