snSwSingleStpMode
FOUNDRY-SN-SWITCH-GROUP-MIB ·
.1.3.6.1.4.1.1991.1.1.3.1.41
Object
scalar
r/w
Enumeration
Single Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is disabled mode. disable(0)...........no Single Spanning Tree enableStp(1).........activate SSTP control vlan to run Spanning Tree enableRstp(2)........activate SSTP control vlan to run Rapid Spanning Tree
Context
- MIB
- FOUNDRY-SN-SWITCH-GROUP-MIB
- OID
.1.3.6.1.4.1.1991.1.1.3.1.41- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- snSwInfo
- Siblings
- 46
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | disable |
1 | enableStp |
2 | enableRstp |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snSwGroupOperMode noVLan(1) represents all switch ports with no virtual
LAN by port (no Port VLAN), and with no tag assigned.
vlanByPort(2) represents all switch ports with Basic
VLAN (layer2 Swi… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.1 |
| snFdbTableStationFlush The following values of the flush state
can only be read:
normal(1)... normal state
error(2)... operation failed
flushing(4)... in process
The following value can be… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.10 |
| snPortStpSetAll The value of this object is 1 which means invoking
Port STP Set-all command. The snPortStpPriority,
snPortStpPathCost, the read-write STP related
attributes of the first row of… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.11 |
| snSwProbePortNum A chassis switch probe port is operated as a traffic analyzer
port and only one port can be assigned in the chassis.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot nu… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.12 |
| snSw8021qTagMode The Switch Group is configured with the IEEE802.1q
Tagging mode either enabled or disabled and the
default is disabled mode.
enabled(1)...........activate IEEE802.1q Tagging mode.… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.13 |
| snSwGlobalStpMode Spanning Tree System Global Mode in the Switch Group
can be set either enabled or disabled and the default is
enabled mode.
enabled(1)...........activate Spanning Tree
disabled(… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.14 |
| snSwIpMcastQuerierMode The IP Multicast pruning mode is configured either
Non-Querier or Querier mode and the default is
querier mode.
querier(1)...........when prunning traffic locally
within… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.15 |
| snSwViolatorPortNumber The port number of the switch or router that received
a violator packet. It is included in the locked
address violation trap.
The bit 0 to bit 7: port number.
The bit 8 to bit 11… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.17 |
| snSwViolatorMacAddress The source address of the violator packet received
by the switch or router. It is included in the locked
address violation trap. | scalar | FOUNDRY-SN-AGENT-MIBMacAddress | .1.3.6.1.4.1.1991.1.1.3.1.18 |
| snVLanGroupVlanMaxEntry The maximum number of VLAN entries are allowed to configure. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.19 |
| snSwGroupIpL3SwMode The Switch Group is configured with the Layer3
IP Switch mode either enabled or disabled and the
default is disabled mode.
enabled(1)...........activate Layer3 IP Switch
disabled(… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.2 |
| snSwEosBufferSize A specific buffer size for all the different EOS buffers. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.20 |
| snVLanByPortEntrySize The size of each VLAN table entry. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.21 |
| snSwPortEntrySize The size of each port table entry. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.22 |
| snFdbStationEntrySize The size of each Fdb station table entry. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.23 |
| snPortStpEntrySize The size of each port stp table entry. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.24 |
| snSwEnableBridgeNewRootTrap Indicates whether the SNMP agent process is
permitted to generate bridge new root traps. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.25 |
| snSwEnableBridgeTopoChangeTrap Indicates whether the SNMP agent process is
permitted to generate bridge topology change
traps. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.26 |
| snSwEnableLockedAddrViolationTrap Indicates whether the SNMP agent process is
permitted to generate locked address violation
traps. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.27 |
| snSwIpxL3SwMode The Switch Group is configured with the Layer3
IPX Switch mode either enabled or disabled and
the default is disabled mode.
enabled(1)...........activate Layer3 Switch
disabled(0… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.28 |
| snVLanByIpSubnetMaxSubnets The maximum number of subnets for each IP VLAN. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.29 |
| snSwGroupIpMcastMode The Switch Group is configured with the IP Multicast (IGMP snooping)
mode either enabled (active or passive) or disabled and the
default is disabled mode.
disabled(0)......IP Mul… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.3 |
| snVLanByIpxNetMaxNetworks The maximum number of networks for each IPX VLAN. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.30 |
| snSwProtocolVLanMode deprecated disabled(0) - represents system with Protocol VLAN disabled.
enabled(1) - represents system with Protocol VLAN enabled (Layer3 VLAN). | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.31 |
| snMacStationVLanId deprecated This VLAN ID controls filtering of the Forwarding Database
table in the standard Bridge MIB (dot1dTpFdbTable). Since the
dot1dTpFdbTable contains MAC addresses associated with ea… | scalar | Integer32 | .1.3.6.1.4.1.1991.1.1.3.1.32 |
| snSwClearCounters valid(0) - a SNMP-GET of this mib shows that it is valid command to use.
clear(1) - represents clear counter command of the following counters:
Dot3, MIB2, IP and IPX counters… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.33 |
| snSw8021qTagType The IEEE802.1q tag type embedded in the length/type field of
an Ethernet packet. It specifies that the 2 octets after the
length/type field in an Ethernet packet is the tag value. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.34 |
| snSwBroadcastLimit Limit the number of broadcast packets to forward out of the
switch ports. This object specifies the number of broadcast
packets per second. Setting a value of 0 to this object
dis… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.35 |
| snSwMaxMacFilterPerSystem The maximum number of MAC Filters per system in the MAC Filter table. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.36 |
| snSwMaxMacFilterPerPort The maximum number of MAC Filters per port in the Port MAC Access Filter table. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.37 |
| snSwDefaultVLanId The VLAN ID of the DEFAULT PORT-VLAN. | scalar | Integer32 | .1.3.6.1.4.1.1991.1.1.3.1.38 |
| snSwGlobalAutoNegotiate This feature only applies to Gigabit Ethernet ports. If set
to disable(0), all Gigabit Ethernet ports will be put to non-
negotiation mode. If set to enable(1), all Gigabit Ethern… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.39 |
| snSwGroupDefaultCfgMode The Switch Group is configured with the Default
configuration. If the default configuration gets
overwritten, the state will change to non-default.
default(1)...........default co… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.4 |
| snSwQosMechanism Indicates whether the qos mechanism is
strict or weighted. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.40 |
| snSwFastStpMode Fast Spanning Tree System Mode in the Switch Group
can be set either enabled or disabled and the default is
enabled mode.
enabled(1)...........activate Fast Spanning Tree
disabl… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.42 |
| snSwViolatorIfIndex The port number of the switch or router that received
a violator packet. It is included in the locked
address violation trap. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.43 |
| snSwSingleStpVLanId The VLAN ID of the Single Spanning Tree VLAN if Single
Spanning Tree was enabled. This object returns zero if
Single Spanning Tree was disabled. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.44 |
| snSwJumboMode The jumbo mode on the Switch can be set either enabled or disabled
and the default is disabled mode. The jumbo frame (10200 bytes) can
be supported if this mode is enabled. Plea… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.45 |
| snSwACLPerPortPerVlanMode obsolete The ACL Per port per VLAN mode on the Switch
can be set either enabled or disabled and the default is
disabled mode. Allow the access list on selective ports
of VLAN or VE if t… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.3.1.46 |
| snSwIpMcastVersion Multicast version at the globle level can be set
2 or 3, and the default is 2 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.47 |
| snSwMgmtVlan VLAN can be a part of the management VLAN. It dedicates
this VLAN for management purpose.
The value 0 means that the management VLAN is not configurated,
or is not applicable,… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.48 |
| snSwGroupSwitchAgeTime Sets the aging period for ports on the device, defining how long a port
address remains active in the address table.
Valid values: 0 = no aging, or 67 - 65535 seconds
Default: 300… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.5 |
| snVLanGroupVlanCurEntry The current total entry number of VLANs are configured. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.6 |
| snVLanGroupSetAllVLan The value of this object is the VLanIndex of a particalur
entry in snVLanByPortCfgTable (snVLanByPortCfgVLanId).
All the attributes of that row of table except PortMask
will be … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.7 |
| snSwPortSetAll The value of this object is the index number of the
snSwPortInfoTable (snSwPortInfoPortIndex).
snSwPortInfoMonitorMode, snSwPortInfoTagMode,
snSwPortInfoChnMode, snSwPortInfoSp… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.8 |
| snFdbTableCurEntry The current total entry number of FDB are configured. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.1.9 |