FOUNDRY-SN-SWITCH-GROUP-MIB Table View

.

snVLanByProtocolEntry row .1.3.6.1.4.1.1991.1.1.3.2.2.1

An entry in the VLAN By Protocol Configuration table.

Indexes

snVLanByProtocolVLanId snVLanByProtocolIndex

Column	Syntax	OID
snVLanByProtocolVLanId The VLAN ID index to both of the VLAN By Port Info Table and this table.	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.1991.1.1.3.2.2.1.1
snVLanByProtocolIndex The following IP/IPX protocol VLAN types are operated in Layer3 VLAN such as : ip(1), ipx(2), ipv6(7) The following are operated in Layer2 bridging such as: appleTalk(3), decNet(4), netBios(5), others(6) -- other proto…	Enumeration Enumerated Values: 1 ip 2 ipx 3 appleTalk 4 decNet 5 netBios 6 others 7 ipv6	.1.3.6.1.4.1.1991.1.1.3.2.2.1.2
snVLanByProtocolDynamic disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.1991.1.1.3.2.2.1.3
snVLanByProtocolStaticMaskdeprecated The Standand-alone switch Protocol VLAN port membership applied in static mode. (It was obsoleted for Chassis Product)	PortMaskr/w	.1.3.6.1.4.1.1991.1.1.3.2.2.1.4
snVLanByProtocolExcludeMaskdeprecated The Standand-alone switch Protocol VLAN port membership applied in exclusive mode. (It was obsoleted for Chassis Product)	PortMaskr/w	.1.3.6.1.4.1.1991.1.1.3.2.2.1.5
snVLanByProtocolRouterIntf Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured.	Integer32r/w Constraints: range: 1-60	.1.3.6.1.4.1.1991.1.1.3.2.2.1.6
snVLanByProtocolRowStatus This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisti…	Enumerationr/w Enumerated Values: 1 other 2 valid 3 delete 4 create 5 modify	.1.3.6.1.4.1.1991.1.1.3.2.2.1.7
snVLanByProtocolDynamicMaskdeprecated The Standand-alone switch Protocol VLAN active port membership. (It was obsoleted for Chassis Product)	PortMask	.1.3.6.1.4.1.1991.1.1.3.2.2.1.8
snVLanByProtocolChassisStaticMaskdeprecated The Chassis Protocol VLAN port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByProtocolStaticPortList)	OctetStringr/w Constraints: range: 32-32	.1.3.6.1.4.1.1991.1.1.3.2.2.1.9
snVLanByProtocolChassisExcludeMaskdeprecated The Chassis Protocol VLAN port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByProtocolExcludePortList)	OctetStringr/w Constraints: range: 32-32	.1.3.6.1.4.1.1991.1.1.3.2.2.1.10
snVLanByProtocolChassisDynamicMaskdeprecated The Chassis Protocol VLAN active port membership. (It was obsoleted after release 07100, replaced by snVLanByProtocolDynamicPortList)	OctetString Constraints: range: 32-32	.1.3.6.1.4.1.1991.1.1.3.2.2.1.11
snVLanByProtocolVLanName VLAN Community Name string.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1991.1.1.3.2.2.1.12
snVLanByProtocolStaticPortList A list of port indices which are the configured port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.	OctetStringr/w	.1.3.6.1.4.1.1991.1.1.3.2.2.1.13
snVLanByProtocolExcludePortList A list of port indices which are the excluded from port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.	OctetStringr/w	.1.3.6.1.4.1.1991.1.1.3.2.2.1.14
snVLanByProtocolDynamicPortList A list of port indices which are dynamically joining the port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.	OctetString	.1.3.6.1.4.1.1991.1.1.3.2.2.1.15

An entry of the VLAN By IPX Network Number Table.

snVLanByIpSubnetEntry row .1.3.6.1.4.1.1991.1.1.3.2.3.1

An entry in the VLAN By IP Subnet Configuration table.

Indexes

snVLanByIpSubnetVLanId snVLanByIpSubnetIpAddress snVLanByIpSubnetSubnetMask

Column	Syntax	OID
snVLanByIpSubnetVLanId The VLAN ID index to both of the VLAN By Port Info Table and this table.	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.1991.1.1.3.2.3.1.1
snVLanByIpSubnetIpAddress Subnet IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1991.1.1.3.2.3.1.2
snVLanByIpSubnetSubnetMask Subnet mask associated with the Subnet IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1991.1.1.3.2.3.1.3
snVLanByIpSubnetDynamic disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.1991.1.1.3.2.3.1.4
snVLanByIpSubnetStaticMaskdeprecated The Standand-alone switch VLAN By Subnet port membership applied in static mode. (It was obsoleted for Chassis Product)	PortMaskr/w	.1.3.6.1.4.1.1991.1.1.3.2.3.1.5
snVLanByIpSubnetExcludeMaskdeprecated The Standand-alone switch VLAN By Subnet port membership applied in exclusive mode. (It was obsoleted for Chassis Product)	PortMaskr/w	.1.3.6.1.4.1.1991.1.1.3.2.3.1.6
snVLanByIpSubnetRouterIntf Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured.	Integer32r/w Constraints: range: 1-60	.1.3.6.1.4.1.1991.1.1.3.2.3.1.7
snVLanByIpSubnetRowStatus This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisti…	Enumerationr/w Enumerated Values: 1 other 2 valid 3 delete 4 create 5 modify	.1.3.6.1.4.1.1991.1.1.3.2.3.1.8
snVLanByIpSubnetDynamicMaskdeprecated The Standand-alone switch VLAN By Subnet active port membership. (It was obsoleted for Chassis Product)	PortMask	.1.3.6.1.4.1.1991.1.1.3.2.3.1.9
snVLanByIpSubnetChassisStaticMaskdeprecated The Chassis VLAN By Subnet port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetStaticPortList)	OctetStringr/w Constraints: range: 32-32	.1.3.6.1.4.1.1991.1.1.3.2.3.1.10
snVLanByIpSubnetChassisExcludeMaskdeprecated The Chassis VLAN By Subnet port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetExcludePortList)	OctetStringr/w Constraints: range: 32-32	.1.3.6.1.4.1.1991.1.1.3.2.3.1.11
snVLanByIpSubnetChassisDynamicMaskdeprecated The Chassis VLAN By Subnet active port membership. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetDynamicPortList)	OctetString Constraints: range: 32-32	.1.3.6.1.4.1.1991.1.1.3.2.3.1.12
snVLanByIpSubnetVLanName VLAN Community Name string.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1991.1.1.3.2.3.1.13
snVLanByIpSubnetStaticPortList A list of port indices which are the configured port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.	OctetStringr/w	.1.3.6.1.4.1.1991.1.1.3.2.3.1.14
snVLanByIpSubnetExcludePortList A list of port indices which are the excluded from port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.	OctetStringr/w	.1.3.6.1.4.1.1991.1.1.3.2.3.1.15
snVLanByIpSubnetDynamicPortList A list of port indices which are dynamically joining the port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.	OctetString	.1.3.6.1.4.1.1991.1.1.3.2.3.1.16

An entry of the VLAN By IPX Network Number Table.

snVLanByIpxNetEntry row .1.3.6.1.4.1.1991.1.1.3.2.4.1

An entry in the VLAN By Ipx Network Number Configuration table.

Indexes

snVLanByIpxNetVLanId snVLanByIpxNetNetworkNum snVLanByIpxNetFrameType

Column	Syntax	OID
snVLanByIpxNetVLanId The VLAN ID index to both of the VLAN By Port Info Table and this table.	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.1991.1.1.3.2.4.1.1
snVLanByIpxNetNetworkNum IPX Network Number.	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.1991.1.1.3.2.4.1.2
snVLanByIpxNetFrameType The following IPX Frame types are operated in Layer3 VLAN such as : ipxEthernet8022(1), ipxEthernet8023(2), ipxEthernetII(3), ipxEthernetSnap(4). choose notApplicable(0) for other protocols. Note: Each Network Number…	Enumeration Enumerated Values: 0 notApplicable 1 ipxEthernet8022 2 ipxEthernet8023 3 ipxEthernetII 4 ipxEthernetSnap	.1.3.6.1.4.1.1991.1.1.3.2.4.1.3
snVLanByIpxNetDynamic disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.1991.1.1.3.2.4.1.4
snVLanByIpxNetStaticMaskdeprecated The VLAN By IPX network port membership applied in static mode. (It was obsoleted for Chassis Product)	PortMaskr/w	.1.3.6.1.4.1.1991.1.1.3.2.4.1.5
snVLanByIpxNetExcludeMaskdeprecated The VLAN By IPX network port membership applied in exclusive mode. (It was obsoleted for Chassis Product)	PortMaskr/w	.1.3.6.1.4.1.1991.1.1.3.2.4.1.6
snVLanByIpxNetRouterIntf Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured.	Integer32r/w Constraints: range: 1-60	.1.3.6.1.4.1.1991.1.1.3.2.4.1.7
snVLanByIpxNetRowStatus This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisti…	Enumerationr/w Enumerated Values: 1 other 2 valid 3 delete 4 create 5 modify	.1.3.6.1.4.1.1991.1.1.3.2.4.1.8
snVLanByIpxNetDynamicMaskdeprecated The VLAN By IPX network active port membership. (It was obsoleted for Chassis Product)	PortMask	.1.3.6.1.4.1.1991.1.1.3.2.4.1.9
snVLanByIpxNetChassisStaticMaskdeprecated The Chassis VLAN By IPX network port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByIpxNetStaticPortList)	OctetStringr/w Constraints: range: 32-32	.1.3.6.1.4.1.1991.1.1.3.2.4.1.10
snVLanByIpxNetChassisExcludeMaskdeprecated The Chassis VLAN By IPX network port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByIpxNetExcludePortList)	OctetStringr/w Constraints: range: 32-32	.1.3.6.1.4.1.1991.1.1.3.2.4.1.11
snVLanByIpxNetChassisDynamicMaskdeprecated The Chassis VLAN By IPX network active port membership. (It was obsoleted after release 07100, replaced by snVLanByIpxNetDynamicPortList)	OctetString Constraints: range: 32-32	.1.3.6.1.4.1.1991.1.1.3.2.4.1.12
snVLanByIpxNetVLanName VLAN Community Name string.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1991.1.1.3.2.4.1.13
snVLanByIpxNetStaticPortList A list of port indices which are the configured port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.	OctetStringr/w	.1.3.6.1.4.1.1991.1.1.3.2.4.1.14
snVLanByIpxNetExcludePortList A list of port indices which are the excluded from port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.	OctetStringr/w	.1.3.6.1.4.1.1991.1.1.3.2.4.1.15
snVLanByIpxNetDynamicPortList A list of port indices which are dynamically joining the port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.	OctetString	.1.3.6.1.4.1.1991.1.1.3.2.4.1.16

A Table Of VLAN By AppleTalk Network Number.

snVLanByATCableEntry row .1.3.6.1.4.1.1991.1.1.3.2.5.1

An entry of the AppleTalk Cable VLAN table.

Indexes

snVLanByATCableVLanId snVLanByATCableIndex

Column	Syntax	OID
snVLanByATCableVLanId The VLAN ID of a PORT VLAN of which the AppleTalk Cable VLAN was attaching to.	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.1991.1.1.3.2.5.1.1
snVLanByATCableIndex AppleTalk Cable VLAN index number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.1.3.2.5.1.2
snVLanByATCableRouterIntf A virtual router interface to the AppleTalk Cable VLAN, only router products accept the SNMP-SET operation. The value zero indicates that virtual router interface was not configured.	Integer32r/w Constraints: range: 0-60	.1.3.6.1.4.1.1991.1.1.3.2.5.1.3
snVLanByATCableRowStatus This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisti…	Enumerationr/w Enumerated Values: 1 other 2 valid 3 delete 4 create 5 modify	.1.3.6.1.4.1.1991.1.1.3.2.5.1.4
snVLanByATCableChassisStaticMaskdeprecated A list of ports which are statically configured to become port members of a VLAN. (It was obsoleted after release 07100, replaced by snVLanByATCableStaticPortList)	OctetStringr/w Constraints: range: 32-32	.1.3.6.1.4.1.1991.1.1.3.2.5.1.5
snVLanByATCableVLanName VLAN Name string.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1991.1.1.3.2.5.1.6
snVLanByATCableStaticPortList A list of port indices which are the configured port membership of the AppleTalk Cable VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.	OctetStringr/w	.1.3.6.1.4.1.1991.1.1.3.2.5.1.7

Port VLAN (Layer 2 VLAN) port membership table.

snVLanByPortMemberEntry row .1.3.6.1.4.1.1991.1.1.3.2.6.1

An entry of the port VLAN membership table.

Indexes

snVLanByPortMemberVLanId snVLanByPortMemberPortId

Column	Syntax	OID
snVLanByPortMemberVLanId The VLAN identifier (VLAN ID).	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.1991.1.1.3.2.6.1.1
snVLanByPortMemberPortId The ifIndex which is a member of the port VLAN.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.1991.1.1.3.2.6.1.2
snVLanByPortMemberRowStatus This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists,…	Enumerationr/w Enumerated Values: 1 other 2 valid 3 delete 4 create	.1.3.6.1.4.1.1991.1.1.3.2.6.1.3
snVLanByPortMemberTagMode Configure an interface as tagged member of non-default VLAN, untagged VLAN membership of the interface will not be modified, be it is default-VLAN or non-default VLAN. Configure an interface as untagged member of non-de…	Enumerationr/w Enumerated Values: 1 tagged 2 untagged	.1.3.6.1.4.1.1991.1.1.3.2.6.1.4

Port VLAN (Layer 2 VLAN) configuration table.

snVLanByPortCfgEntry row .1.3.6.1.4.1.1991.1.1.3.2.7.1

An entry of the port VLAN configuration table.

Indexes

snVLanByPortCfgVLanId

Column	Syntax	OID
snVLanByPortCfgVLanId The VLAN identifier (VLAN ID).	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.1991.1.1.3.2.7.1.1
snVLanByPortCfgQos The Stand alone stackable switch VLAN Priority values are: level0(0) -- low prority level1(1) -- high prority. The BigIron switch VLAN Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5…	PortQosTCr/w Type Values: 0 level0 1 level1 2 level2 3 level3 4 level4 5 level5 6 level6 7 level7 127 invalid	.1.3.6.1.4.1.1991.1.1.3.2.7.1.2
snVLanByPortCfgStpMode Spanning Tree Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. disable(0)...........no Spanning Tree enableStp(1).........activate Spanning Tree enableRstp(2)........activ…	Enumerationr/w Enumerated Values: 0 disable 1 enableStp 2 enableRstp	.1.3.6.1.4.1.1991.1.1.3.2.7.1.3
snVLanByPortCfgStpPriority dot1dStpPriority : The value of the write-able portion of the Stp ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of the base bridge…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1991.1.1.3.2.7.1.4
snVLanByPortCfgStpGroupMaxAge dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the va…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.1.3.2.7.1.5
snVLanByPortCfgStpGroupHelloTime dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB). The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An age…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.1.3.2.7.1.6
snVLanByPortCfgStpGroupForwardDelay dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB). The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is relate…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.1.3.2.7.1.7
snVLanByPortCfgBaseNumPorts The number of ports controlled by this bridging entity.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.1.3.2.7.1.8
snVLanByPortCfgBaseType Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.	Enumeration Enumerated Values: 1 unknown 2 transparentOnly 3 sourcerouteOnly 4 srt	.1.3.6.1.4.1.1991.1.1.3.2.7.1.9
snVLanByPortCfgStpProtocolSpecification An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If fut…	Enumeration Enumerated Values: 1 unknown 2 decLb100 3 ieee8021d	.1.3.6.1.4.1.1991.1.1.3.2.7.1.10
snVLanByPortCfgStpMaxAge dot1dStpMaxAge: From RFC1493(Bridge MIB). The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value …	Timeout	.1.3.6.1.4.1.1991.1.1.3.2.7.1.11
snVLanByPortCfgStpHelloTime dot1dStpHelloTime: From RFC1493(Bridge MIB). The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of…	Timeout	.1.3.6.1.4.1.1991.1.1.3.2.7.1.12
snVLanByPortCfgStpHoldTime dot1dStpHoldTime: From RFC1493(Bridge MIB). This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.1.3.2.7.1.13
snVLanByPortCfgStpForwardDelay dot1dStpForwardDelay: From RFC1493(Bridge MIB). This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value dete…	Timeout	.1.3.6.1.4.1.1991.1.1.3.2.7.1.14
snVLanByPortCfgStpTimeSinceTopologyChange The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.2.7.1.15
snVLanByPortCfgStpTopChanges The total number of topology changes detected by this bridge since the management entity was last reset or initialized.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.2.7.1.16
snVLanByPortCfgStpRootCost dot1dStpRootCost: From RFC1493(Bridge MIB). The cost of the path to the root as seen from this bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.1.3.2.7.1.17
snVLanByPortCfgStpRootPort dot1dStpRootPort: From RFC1493(Bridge MIB). The port number of the port which offers the lowest cost path from this bridge to the root bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.1.3.2.7.1.18
snVLanByPortCfgStpDesignatedRoot dot1dStpDesignatedRoot: From RFC1493(Bridge MIB). The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier p…	BridgeId Type Constraints: range: 8	.1.3.6.1.4.1.1991.1.1.3.2.7.1.19
snVLanByPortCfgBaseBridgeAddress The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only req…	FOUNDRY-SN-AGENT-MIBMacAddress Type Constraints: range: 6	.1.3.6.1.4.1.1991.1.1.3.2.7.1.20
snVLanByPortCfgVLanName VLAN Community Name string.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1991.1.1.3.2.7.1.21
snVLanByPortCfgRouterIntf Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.1.3.2.7.1.22
snVLanByPortCfgRowStatus Use object to delete a vlan entry.	Enumerationr/w Enumerated Values: 1 other 2 valid 3 delete	.1.3.6.1.4.1.1991.1.1.3.2.7.1.23
snVLanByPortCfgStpVersion The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning Tree Protocol…	Enumerationr/w Enumerated Values: 0 stpCompatible 2 rstp	.1.3.6.1.4.1.1991.1.1.3.2.7.1.24
snVLanByPortCfgInOctetsdeprecated The number of bytes received on this VLAN. This can be used as the per VE couter, if there is one-to-one map for VLAN-VE.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.1991.1.1.3.2.7.1.25
snVLanByPortCfgMcastMode Multicast (IGMP snooping) mode on the VLAN can be set either active or passive or disabled and the default is disabled. disabled(0)..... IP Multicast is disabled on this VLAN active(1)........this VLAN generates IG…	Enumerationr/w Enumerated Values: 0 disabled 1 active 2 passive	.1.3.6.1.4.1.1991.1.1.3.2.7.1.26
snVLanByPortCfgMcastVersion Multicast version at this VLAN can be set 2 or 3, and the default is 2. The initial value is 0	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.1.3.2.7.1.27

A specific snSwIfInfo group consists of a number of 
switch ports.

snSwIfInfoEntry row .1.3.6.1.4.1.1991.1.1.3.3.5.1

An entry in the snSwIfInfo table indicates the
configuration on a specified port. A SNMP SET PDU
for a row of the snSwIfInfoTable requires the entire
sequence of the MIB Objects in each
snSwIfInfoEntry stored in one…

Indexes

snSwIfInfoPortNum

Column	Syntax	OID
snSwIfInfoPortNum The port/interface index (ifindex).	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.1991.1.1.3.3.5.1.1
snSwIfInfoMonitorModedeprecated DEPRECATED by snSwIf2MirrorMode and snPortMonitorTable.	Enumerationr/w Enumerated Values: 0 disabled 1 input 2 output 3 both	.1.3.6.1.4.1.1991.1.1.3.3.5.1.2
snSwIfInfoMirrorPorts The list of port/interface index (ifindex), which mirror this interface, when monitoring is enabled.	OctetStringr/w	.1.3.6.1.4.1.1991.1.1.3.3.5.1.3
snSwIfInfoTagMode Configure an interface as tagged member of non-default VLAN, untagged VLAN membership of the interface will not be modified, be it is default-VLAN or non-default VLAN. Configure an interface as untagged member of non…	Enumerationr/w Enumerated Values: 1 tagged 2 untagged 3 dual	.1.3.6.1.4.1.1991.1.1.3.3.5.1.4
snSwIfInfoTagType The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet packet is the tag value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.1.3.3.5.1.5
snSwIfInfoChnMode The port can be configured to operate in either half or full duplex mode. The values are: halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The read-back channel status from hardware are: none(0).....…	Enumerationr/w Enumerated Values: 0 none 1 halfDuplex 2 fullDuplex	.1.3.6.1.4.1.1991.1.1.3.3.5.1.6
snSwIfInfoSpeed The speed configuration for a port. The values are: none(0)..........link down or no traffic. sAutoSense(1)....Auto-sensing 10 or 100Mbits. s10M(2)..........10Mbits per second. s100M(3).........100Mbits per second. s1G(…	Enumerationr/w Enumerated Values: 0 none 1 sAutoSense 2 s10M 3 s100M 4 s1G 5 s1GM 6 s155M 7 s10G 8 s622M 9 s2488M 10 s9953M 11 s16G 12 sOpticBased 13 s40G 14 s2500M 15 s5000M 16 s100G 17 s25G	.1.3.6.1.4.1.1991.1.1.3.3.5.1.7
snSwIfInfoMediaType The media type for the port. The values are: other(1).........other or unknown media. m100BaseTX(2)....100Mbits per second copper. m100BaseFX(3)....100Mbits per second fiber. m1000BaseFX(4)...1Gbits per second f…	Enumeration Enumerated Values: 1 other 2 m100BaseTX 3 m100BaseFX 4 m1000BaseFX 5 mT3 6 m155ATM 7 m1000BaseTX 8 m622ATM 9 m155POS 10 m622POS 11 m2488POS 12 m10000BaseFX 13 m9953POS 14 m16GStacking 16 m40GStacking 19 m2500BaseTX 20 m100GBaseTX 21 mMultiGigBZ 22 m40GBaseTX 23 m25GBaseFX	.1.3.6.1.4.1.1991.1.1.3.3.5.1.8
snSwIfInfoConnectorType The type of connector that the port offers. The values are: other(1)...........other or unknown connector copper(2)..........Copper connector fiber(3)...........Fiber connector This describes the physical connector t…	Enumeration Enumerated Values: 1 other 2 copper 3 fiber	.1.3.6.1.4.1.1991.1.1.3.3.5.1.9
snSwIfInfoAdminStatus The desired state of all ports. The testing(3) state indicates that no operational packets can be passed. (same as ifAdminStatus in MIB-II)	Enumerationr/w Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.1991.1.1.3.3.5.1.10
snSwIfInfoLinkStatus The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifOperStatus in MIB-II)	Enumeration Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.1991.1.1.3.3.5.1.11
snSwIfInfoPortQos The Stand alone stackable switch Port Qos Priority values are: low(0) -- low prority high(1) -- high prority. The BigIron Port Qos Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5),…	Enumerationr/w Enumerated Values: 0 level0 1 level1 2 level2 3 level3 4 level4 5 level5 6 level6 7 level7	.1.3.6.1.4.1.1991.1.1.3.3.5.1.12
snSwIfInfoPhysAddress The port physical address. The physical address represents the switch port.	PhysAddress	.1.3.6.1.4.1.1991.1.1.3.3.5.1.13
snSwIfLockAddressCount The number of source MAC addresses are allowed for a port. Writing 0 to this object will allow any number of addresses.	Integer32r/w Constraints: range: 0-2048	.1.3.6.1.4.1.1991.1.1.3.3.5.1.14
snSwIfStpPortEnable The enabled/disabled status of the port.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.1991.1.1.3.3.5.1.15
snSwIfDhcpGateListId The ID for a DHCP gateway list entry relative to this switch port. 0 = unset or no assigned ID	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.1991.1.1.3.3.5.1.16
snSwIfName Port Name string.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.1991.1.1.3.3.5.1.17
snSwIfDescr A textual string containing the slot/port information about the interface.	FOUNDRY-SN-AGENT-MIBDisplayString	.1.3.6.1.4.1.1991.1.1.3.3.5.1.18
snSwIfInfoAutoNegotiate This feature only applies to Gigabit Ethernet ports. If set to disable(0), port will be put to non-negotiation mode. If set to enable(1), port will start auto-negotiation indefinitely until succeed. If set to negFullAut…	Enumerationr/w Enumerated Values: 0 disabled 1 enabled 2 negFullAuto 3 global 4 other	.1.3.6.1.4.1.1991.1.1.3.3.5.1.19
snSwIfInfoFlowControl Enable/Disbale port flow control.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.1991.1.1.3.3.5.1.20
snSwIfInfoGigType The media type for the port. The values are: m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver. m1000BaseLX(1)....1Gbits per second fiber, with a long wavelength transceiver (3km). m10…	Enumeration Enumerated Values: 0 m1000BaseSX 1 m1000BaseLX 2 m1000BaseLH 3 m1000BaseLHA 4 m1000BaseLHB 5 m1000BaseTX 6 m10000BaseSR 7 m10000BaseLR 8 m10000BaseER 9 sfpCWDM1470nm80Km 10 sfpCWDM1490nm80Km 11 sfpCWDM1510nm80Km 12 sfpCWDM1530nm80Km 13 sfpCWDM1550nm80Km 14 sfpCWDM1570nm80Km 15 sfpCWDM1590nm80Km 16 sfpCWDM1610nm80Km 17 sfpCWDM1470nm100Km 18 sfpCWDM1490nm100Km 19 sfpCWDM1510nm100Km 20 sfpCWDM1530nm100Km 21 sfpCWDM1550nm100Km 22 sfpCWDM1570nm100Km 23 sfpCWDM1590nm100Km 24 sfpCWDM1610nm100Km 25 m1000BaseLHX 26 m1000BaseSX2 27 mSFP1000BaseBXU 28 mSFP1000BaseBXD 29 mSFP100BaseBX 30 mSFP100BaseBXU 31 mSFP100BaseBXD 32 mSFP100BaseFX 33 mSFP100BaseFXIR 34 mSFP100BaseFXLR 35 m1000BaseLMC 36 mXFP10000BaseSR 37 mXFP10000BaseLR 38 mXFP10000BaseER 39 mXFP10000BaseSW 40 mXFP10000BaseLW 41 mXFP10000BaseEW 42 mXFP10000BaseCX4 43 mXFP10000BaseZR 44 mXFP10000BaseZRD 45 m1000BaseC6553 46 mXFP10000BaseSRSW 47 mXFP10000BaseLRLW 48 mXFP10000BaseEREW 49 m10000BaseT 50 m2500BaseTX 51 m100GBaseTX 52 mMultiGigBZ 53 m40GBaseTX 54 m25GBaseFX 127 m1000BaseGBXU 128 m1000BaseGBXD 129 m1000BaseFBX 130 m1000BaseFBXU 131 m1000BaseFBXD 132 m1000BaseFX 133 m1000BaseFXIR 134 m1000BaseFXLR 136 m1000BaseXGSR 137 m1000BaseXGLR 138 m1000BaseXGER 139 m1000BaseXGSW 140 m1000BaseXGLW 141 m1000BaseXGEW 142 m1000BaseXGCX4 143 m1000BaseXGZR 144 m1000BaseXGZRD 255 notApplicable	.1.3.6.1.4.1.1991.1.1.3.3.5.1.21
snSwIfFastSpanPortEnable The enabled/disabled fast span port status of the port.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.1991.1.1.3.3.5.1.22
snSwIfFastSpanUplinkEnable The enabled/disabled fast span uplink status of the port.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.1991.1.1.3.3.5.1.23
snSwIfVlanIddeprecated This object return 0 due to no support for this object from FI 08.0.80 release. Write operation not-supported for this object.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.1991.1.1.3.3.5.1.24
snSwIfRouteOnly Enable/Disable L2 switching of a routing switch port. By default, the routing switch performs routing first. If routing failed, it performs switching. Enable route only instrcuts the routing switch to perform routing on…	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.1991.1.1.3.3.5.1.25
snSwIfPresent Indicate if the port is absent or present. This object only valid for M4 module.	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.1991.1.1.3.3.5.1.26
snSwIfGBICStatus Indicate if the gig port has GBICs on them. If set to GBIC(1), it means that the port is GBIC. If set to miniGBIC(2), it means that the port miniGBIC. If set to empty(3), it means that the GBIC is missing. Value other…	Enumeration Enumerated Values: 1 gbic 2 miniGBIC 3 empty 4 other	.1.3.6.1.4.1.1991.1.1.3.3.5.1.27
snSwIfLoadInterval The time in seconds for which average port utilization should be carried out. The value should be incremental of 30 seconds, between the ranges specified.	Integer32r/w Constraints: range: 30-300	.1.3.6.1.4.1.1991.1.1.3.3.5.1.28
snSwIfStatsInFrames The total number of packets received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.29
snSwIfStatsOutFrames The total number of packets transmitted out of the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.30
snSwIfStatsAlignErrors dot3StatsAlignmentErrors : A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance o…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.31
snSwIfStatsFCSErrors dot3StatsFCSErrors : A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this obj…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.32
snSwIfStatsMultiColliFrames dot3StatsMultipleCollisionFrames : A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an insta…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.33
snSwIfStatsTxColliFrames A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by a combination of both dot3StatsSingleCollisi…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.34
snSwIfStatsRxColliFrames A count of successfully received frames on a particular interface for which transmission is inhibited by more than one collision. This object is not specified in dot3 but it has the same functionarity as snSwIfStatsTxC…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.35
snSwIfStatsFrameTooLongs dot3StatsFrameTooLongs : A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the fr…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.36
snSwIfStatsFrameTooShorts A count of frames received on a particular interface that below the minimum permitted frame size.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.37
snSwIfStatsInBcastFrames The total number of broadcast packets received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.38
snSwIfStatsOutBcastFrames The total number of broadcast packets transmitted out of the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.39
snSwIfStatsInMcastFrames The total number of multicast packets received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.40
snSwIfStatsOutMcastFrames The total number of multicast packets transmitted out of the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.41
snSwIfStatsInDiscard The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet co…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.42
snSwIfStatsOutDiscard The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer s…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.43
snSwIfStatsMacStations The total number of MAC Stations connected to the interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.1.3.3.5.1.44
snSwIfStatsLinkChange The total number of link state change of the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.45
snSwIfInOctets The total number of octets received on the interface, including framing characters. This object is a 64-bit counter of the ifInOctets object, defined in RFC 1213. The octet string is in big-endian byte order.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.1991.1.1.3.3.5.1.46
snSwIfOutOctets The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit counter of the ifOutOctets object, defined in RFC 1213. The octet string is in big-endian byte order.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.1991.1.1.3.3.5.1.47
snSwIfStatsInBitsPerSec The number of bits per second received on the interface over a 5 minutes interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.48
snSwIfStatsOutBitsPerSec The number of bits per second transmitted out of the interface over a 5 minutes interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.49
snSwIfStatsInPktsPerSec The number of packets per second received on the interface over a 5 minutes interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.50
snSwIfStatsOutPktsPerSec The number of packets per second transmitted out of the interface over a 5 minutes interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.51
snSwIfStatsInUtilization The input network utilization in hundredths of a percent over a 5 minutes interval.	Integer32 Constraints: range: 0-10000	.1.3.6.1.4.1.1991.1.1.3.3.5.1.52
snSwIfStatsOutUtilization The output network utilization in hundredths of a percent over a 5 minutes interval.	Integer32 Constraints: range: 0-10000	.1.3.6.1.4.1.1991.1.1.3.3.5.1.53
snSwIfStatsInKiloBitsPerSec Bit rate in kilobits per second received on the 10G and faster interface over a 5 minutes interval.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.54
snSwIfStatsOutKiloBitsPerSec Bit rate in kilobits per second transmitted out of the 10G and faster interface over a 5 minutes interval.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.5.1.55
snSwIfStatsInJumboFrames The total number of jumbo packets received on the interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.1991.1.1.3.3.5.1.56
snSwIfStatsOutJumboFrames The total number of jumbo packets transmitted out of the interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.1991.1.1.3.3.5.1.57
snSwIfInfoMirrorMode Enable/disable mirror on this port.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1991.1.1.3.3.5.1.58
snSwIfMacLearningDisable The status of MAC learning feature on an ethernet port. For POS port, Get operation will return the default value and Set operation will return an error.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1991.1.1.3.3.5.1.59
snSwIfInfoNativeMacAddress The port native MAC address. The native MAC address represents the switch port.	PhysAddress	.1.3.6.1.4.1.1991.1.1.3.3.5.1.62
snSwIfQosMonitorDropCounterMode Enable/disable monitoring egress drop counter on this port. ICX7150 has a set of queue drop counters. A port can be selected to associate with these counters. Only when the port is selected, these drop counters can be m…	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1991.1.1.3.3.5.1.63
snSwIfLRMAdapterPresent To display the state for Long Reach Module (LRM) adapter is presented on this port. Some FastIron ICX devices support LRM optics on 10G fiber ports. LRM adapter (Fluffy) is used to support LRM optics on those switch po…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1991.1.1.3.3.5.1.64
snSwIfStpBPDUGuardMode The status of the spanning tree BPDU guard on an ethernet port. The default is false state.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1991.1.1.3.3.5.1.65
snSwIfStpRootGuardMode The status of the spanning tree root guard on an ethernet port. Declare the port to be on root guard for all spanning trees. The default is false state.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1991.1.1.3.3.5.1.66
snSwIfRstpAdminEdgePortMode The status of the rapid spanning tree admin edge port on an ethernet port. Declare the port to be an operational edge for all vlans. The default is false state.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1991.1.1.3.3.5.1.67
snSwIfInfoClockMode The port can be configured to operate in either master or slave mode. The values are: none(0).........no configured or no support for clock mode, like fiber ports. master(1).......master mode slave(2)........slave…	Enumerationr/w Enumerated Values: 0 none 1 master 2 slave 3 auto	.1.3.6.1.4.1.1991.1.1.3.3.5.1.68
snSwIfProtectedMode Protected port is a port-level, per-device/stack only, security feature that restricts communication with a device connected to the port. The default is false state.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1991.1.1.3.3.5.1.69
snSwIfTrustDscpMode The status of Trust DSCP on an ethernet port. The default is false state.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1991.1.1.3.3.5.1.70
snSwIfVoiceVlanId VLAN can be configurated as a voice over IP VLAN on an ethernet port. The valid range of voice VLAN ID is 1-4095. The value 0 means that the voice VLAN is not configurated or is not applicable	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.1.3.3.5.1.71

This table lists the instrumented parameters of all
optical interfaces.

snIfOpticalMonitoringInfoEntry row .1.3.6.1.4.1.1991.1.1.3.3.6.1

Only the ifIndices of optical interfaces
whose parameters need to be monitored will
be used to index this table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
snIfOpticalMonitoringTemperature This object holds the value of the transmitter laser diode temperature for the interface. This object indicates the health of the transmitter. The format is xxx.yyyy C(elcius), followed by whether the …	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.1991.1.1.3.3.6.1.1
snIfOpticalMonitoringTxPower This object holds the value of the transmitter optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.1991.1.1.3.3.6.1.2
snIfOpticalMonitoringRxPower This object holds the value of the receiver optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.1991.1.1.3.3.6.1.3
snIfOpticalMonitoringTxBiasCurrent Tx Bias Current. It is measured in mA, and is followed by whether this is a normal value, or high/low warning or alarm.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.1991.1.1.3.3.6.1.4

This table lists the information of the media device
(SFP/XFP/Copper) installed in the physical port.
Only the ifIndices of Ethernet ports those are associated
with the operational cards will be included in this table.

snIfMediaInfoEntry row .1.3.6.1.4.1.1991.1.1.3.3.9.1

An entry in the Interface Media Information table.
The ifIndices of ethernet interfaces will be used
to index this table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
snIfMediaType The type of the media installed in the physical port.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.1991.1.1.3.3.9.1.1
snIfMediaVendorName The media vendor name, full name of the corporation.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.1991.1.1.3.3.9.1.2
snIfMediaVersion The media vendor product version number.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.1991.1.1.3.3.9.1.3
snIfMediaPartNumber The media vendor part number.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.1991.1.1.3.3.9.1.4
snIfMediaSerialNumber The vendor serial number of the media device.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.1991.1.1.3.3.9.1.5

This table lists the instrumented parameters of all
lanes within a 100G optic of type LR4 and LR10.
LR4 has 4 lanes per optic, LR10 has 10 lanes per optic.

snIfOpticalLaneMonitoringEntry row .1.3.6.1.4.1.1991.1.1.3.3.10.1

Only the ifIndices of optical interfaces
whose parameters need to be monitored will
be used to index this table.

Indexes

IF-MIBifIndex snIfOpticalLaneMonitoringLane

Column	Syntax	OID
snIfOpticalLaneMonitoringLane The lane number of this 100G optic. LR4 has 4, and LR10 has 10 lanes.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.3.10.1.1
snIfOpticalLaneMonitoringTemperature This object holds the value of the transmitter laser diode temperature for the lane in the interface. This object indicates the health of the transmitter. The format is xxx.yyyy C(elcius), followed by whe…	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.1991.1.1.3.3.10.1.2
snIfOpticalLaneMonitoringTxPower This object holds the value of the transmitter optical signal power for the lane in the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.1991.1.1.3.3.10.1.3
snIfOpticalLaneMonitoringRxPower This object holds the value of the receiver optical signal power for the lane in the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.1991.1.1.3.3.10.1.4
snIfOpticalLaneMonitoringTxBiasCurrent Tx Bias Current. It is measured in mA, and is followed by whether this is a normal value, or high/low warning or alarm.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.1991.1.1.3.3.10.1.5
snIfOpticalLaneMonitoringVoltage This object holds the value of the transmitter laser diode voltage for the lane in the interface. This object indicates the health of the transmitter. The format is xxx.yyyy volts, followed by whether the…	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.1991.1.1.3.3.10.1.6