flWorkNetPortPofScrjIfAlarmContactEnable
FL-MGD-INFRASTRUCT-MIB ·
.1.3.6.1.4.1.4346.11.11.4.2.4.1.21
Object
column
r/w
Enumeration
If this object is switched to enable the alarm contact will open if this POF SCRJ transceiver reaches a critical RX power state. See object flWorkFWCtrlAlarmContactEventPoFScrjTransCritical for global enabling and disabling of alarm contact actions for this sort of event.
Context
- MIB
- FL-MGD-INFRASTRUCT-MIB
- OID
.1.3.6.1.4.1.4346.11.11.4.2.4.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- flWorkNetPortPofScrjIfEntry
- Table
- flWorkNetPortPofScrjIfTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| flWorkNetPortPofScrjIfIndex This object identifies the port. This value
is never greater then flWorkNetPortCapacity. | column | Integer32 | .1.3.6.1.4.1.4346.11.11.4.2.4.1.1 |
| flWorkNetPortPofScrjIfRxPowerLowAlarm Deliverst if the Rx power low alarm for a given port is
set (present(2)) or not set (notPresent(1)) | column | Enumeration | .1.3.6.1.4.1.4346.11.11.4.2.4.1.10 |
| flWorkNetPortPofScrjIfRxPowerHighWarning Deliverst if the Rx power high warning for a given port is
set (present(2)) or not set (notPresent(1)) | column | Enumeration | .1.3.6.1.4.1.4346.11.11.4.2.4.1.11 |
| flWorkNetPortPofScrjIfRxPowerLowWarning Delivers if the Rx power low warning for a given port is
set (present(2)) or not set (notPresent(1)) | column | Enumeration | .1.3.6.1.4.1.4346.11.11.4.2.4.1.12 |
| flWorkNetPortPofScrjIfManufacturer Delivers the name of the manufacturer that
did produce the POF SCRJ transceiver device
on the given port | column | OctetString | .1.3.6.1.4.1.4346.11.11.4.2.4.1.13 |
| flWorkNetPortPofScrjIfManufactOui Delivers the IEEE manufacturer ID of the
manufacturer that did produce the POF SCRJ
transceiver device on the given port | column | OctetString | .1.3.6.1.4.1.4346.11.11.4.2.4.1.14 |
| flWorkNetPortPofScrjIfRevision Delivers the revision of the POF SCRJ
transceiver device on the given port | column | OctetString | .1.3.6.1.4.1.4346.11.11.4.2.4.1.16 |
| flWorkNetPortPofScrjIfWavelength Delivers the wavelength in units of nm the POF SCRJ
transceiver device on the given port is using for signal
generation | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4346.11.11.4.2.4.1.17 |
| flWorkNetPortPofScrjIfTransceiverOptions Gives detailed informations about the
implemented features of th POF SCRJ transceiver
on the given port.
You have to take a look at the binary representation
of the returned num… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4346.11.11.4.2.4.1.18 |
| flWorkNetPortPofScrjIfSerialNumber Delivers the serial number of the POF SCRJ
transceiver device on the given port | column | OctetString | .1.3.6.1.4.1.4346.11.11.4.2.4.1.19 |
| flWorkNetPortPofScrjIfStatus This delivers the current status of the POF SCRJ interface
on the selected port. Meanings are:
notSupported(1) = The actual hw does not support POF SCRJ interface diagno… | column | Enumeration | .1.3.6.1.4.1.4346.11.11.4.2.4.1.2 |
| flWorkNetPortPofScrjIfDatecodeAndLot Delivers the manufacturing date an lot number of
the POF SCRJ transceiver on the given port.
BYTE 1 + 2: Year
BYTE 3 + 4: MONTH
BYTE 5 + 6: DAY
BYTE 7 + 8: LOT Number | column | OctetString | .1.3.6.1.4.1.4346.11.11.4.2.4.1.20 |
| flWorkNetPortPofScrjIfSupplyVoltage Delivers the actual supply voltage of the
transceiver device on the given port
in 0.1 Volt. (i.e. range is von 0 to 6,5V) | column | Integer32 | .1.3.6.1.4.1.4346.11.11.4.2.4.1.4 |
| flWorkNetPortPofScrjIfTxPower Delivers the actual transmission power of the
transceiver device on the given port
in 0.1uW. (i.e. range is von 0 to 0,006553 W) | column | Integer32 | .1.3.6.1.4.1.4346.11.11.4.2.4.1.6 |
| flWorkNetPortPofScrjIfRxPower Delivers the actual reception power of the
transceiver device on the given port
in 0.1uW. (i.e. range is von 0 to 0,006553 W) | column | Integer32 | .1.3.6.1.4.1.4346.11.11.4.2.4.1.7 |
| flWorkNetPortPofScrjIfSystemReserve Delivers the remaining system reserve in units of 0.1dB | column | Integer32 | .1.3.6.1.4.1.4346.11.11.4.2.4.1.8 |
| flWorkNetPortPofScrjIfRxPowerHighAlarm Deliverst if the Rx power high alarm for a given port is
set (present(2)) or not set (notPresent(1)) | column | Enumeration | .1.3.6.1.4.1.4346.11.11.4.2.4.1.9 |