flWorkNetPortModus
FL-MGD-INFRASTRUCT-MIB ·
.1.3.6.1.4.1.4346.11.11.4.2.2.1.9
Object
column
r/w
Enumeration
The modus of this port defined by the user:
autonegotiation(1) - auto negotiation
half-10(2) - 10 MBit Half Duplex
full-10(3) - 10 MBit Full Duplex
half-100(4) - 100 MBit Half Duplex
full-100(5) - 100 MBit Full Duplex
autoneg10-100(20) - auto negotiation 10/100MBit only
fast-startup(21) - fast startup
Note:
a) The ports support auto crossover only in
the modus auto negotiation!
b) FX and HCS ports only support 100 MBit/s full
duplex.
If you try to set a FX or HCS port to a
port modus not equal full-100(5) you get
a snmp response indicating an error!
Context
- MIB
- FL-MGD-INFRASTRUCT-MIB
- OID
.1.3.6.1.4.1.4346.11.11.4.2.2.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- flWorkNetPortEntry
- Table
- flWorkNetPortTable
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| flWorkNetPortIndex This object identifies the port. This value
is never greater then flWorkNetPortCapacity. | column | Integer32 | .1.3.6.1.4.1.4346.11.11.4.2.2.1.1 |
| flWorkNetPortSTPEnable deprecated Firmware with Rapid Spanning Tree:
The value of this object is equal to the status
of the object dot1dStpPortEnable.
When Rapid Spanning Tree is operating this objects
handles th… | column | Enumeration | .1.3.6.1.4.1.4346.11.11.4.2.2.1.10 |
| flWorkNetPortIfIndex The ifIndex of this application 'logical port' (see
interface table of the mib2). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4346.11.11.4.2.2.1.11 |
| flWorkNetPortLLWHPort A value that uniquely identifies a application 'logical port'
(i.e., IEEE 802.3ad Aggregator) in the stack. This is
a 'Layered Linear With Holes' (LLWH) port number that may may h… | column | Integer32 | .1.3.6.1.4.1.4346.11.11.4.2.2.1.12 |
| flWorkNetPortType The media type of this port. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4346.11.11.4.2.2.1.13 |
| flWorkNetPortModuleName The textual name of this module. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4346.11.11.4.2.2.1.14 |
| flWorkNetPortInterfaceName The textual name of this interface
according to the labeling of the device. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4346.11.11.4.2.2.1.15 |
| flWorkNetPortPriorityLevel Choose the priority level for the incoming
packets of one port in the switch
by selecting a level in the range from 0 to 7. | column | Integer32 | .1.3.6.1.4.1.4346.11.11.4.2.2.1.16 |
| flWorkNetPortPofTransmittingPower This objects shows the selected
transmitting power of POF ports.
For polymer fiber (POF) paths < 20 m
(65.62 ft.) the transmission power must
be reduced by sliding the switch on t… | column | Enumeration | .1.3.6.1.4.1.4346.11.11.4.2.2.1.17 |
| flWorkNetPortStpMode The mode of Spanning Tree Protocol the
port is currently running. The value stp(1)
indicates the Spanning Tree Protocol,
rstp(2) indicates the Rapid Spanning
Tree Protocol and non… | column | Enumeration | .1.3.6.1.4.1.4346.11.11.4.2.2.1.18 |
| flWorkNetPortLinkState Get back the current state of the port link.
The state farEndFault(3) indicates that this
fiber optic port receives a signal but the
other port of the path don't get a signal.
Th… | column | Enumeration | .1.3.6.1.4.1.4346.11.11.4.2.2.1.2 |
| flWorkNetPortFlowControl Setting this object to disable(1) inactivates the
flow control mechanism for this port. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.4.2.2.1.20 |
| flWorkNetPortMaxFrameSize This object configures the maximum transmission unit(MTU) or
the size of the largest packet that can be sent/received on the
interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4346.11.11.4.2.2.1.21 |
| flWorkNetPortJumboFrame This object enables/disables jumbo frames on an interface. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.4.2.2.1.22 |
| flWorkNetPortCableLength The length of the table connected to this port in meters. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4346.11.11.4.2.2.1.23 |
| flWorkNetPortPHYcompatibility This object activates some compatibility modes for PHY. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4346.11.11.4.2.2.1.24 |
| flWorkNetPortSpeed The current interface's bandwidth in bits per second. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.4346.11.11.4.2.2.1.3 |
| flWorkNetPortDuplexMode The current duplex mode of this port. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.4.2.2.1.4 |
| flWorkNetPortNegotiation This object gives an information
if auto negotiation is active or not. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.4.2.2.1.5 |
| flWorkNetPortName The textual name of this interface, e.g., 'robot 1'. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4346.11.11.4.2.2.1.6 |
| flWorkNetPortEnable This object is enable(2) when this interface is enabled and
disable(1) when it is disabled. A disabled interfaces doesn't
send any data packets. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.4.2.2.1.7 |
| flWorkNetPortLinkMonitoring Setting this object to enable(2) activates the
link monitoring for this. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.4.2.2.1.8 |