flWlanWifiVapCurrentTxPowerRadiated

FL-MGD-INFRASTRUCT-MIB · .1.3.6.1.4.1.4346.11.11.27.2.1.1.22
MIB view Table view

Object

column SNMPv2-SMIInteger32 
Shows the radiated transmit power in dBm.

Context

MIB
FL-MGD-INFRASTRUCT-MIB
OID
.1.3.6.1.4.1.4346.11.11.27.2.1.1.22
Type
column
Access
readonly
Status
current
Parent
flWlanWifiVapEntry
Table
flWlanWifiVapTable
Siblings
29

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
flWlanWifiVapID
Each VapID is the identification number of a virtual accesspoint instance {101, 102, ...}
columnInteger32.1.3.6.1.4.1.4346.11.11.27.2.1.1.1
flWlanWifiVapStartScanning
Starts a scan process
columnEnumeration.1.3.6.1.4.1.4346.11.11.27.2.1.1.10
flWlanWifiVapNetworkId
Configure the Layer 3 instance the wifi device will be added to.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4346.11.11.27.2.1.1.11
flWlanWifiVapManRoaming
Format: {normal 00:00:00:00:00:00} {bssid xx:xx:xx:xx:xx:xx} Examples: 1) Start a common scan process based on the best accesspoint using the current configured ss…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4346.11.11.27.2.1.1.12
flWlanWifiVapBgScanIdle
Configure the roaming parameter for the wifi device. Network idle time in milliseconds (ms).
columnInteger32.1.3.6.1.4.1.4346.11.11.27.2.1.1.13
flWlanWifiVapRssiThrshForceScan
Configure the roaming parameter for the wifi device. Forced scan threshold in dBm. RSSI value below which the device starts a forced scan (without respecting the network traffic).
columnInteger32.1.3.6.1.4.1.4346.11.11.27.2.1.1.14
flWlanWifiVapRssiChangeRoam
Configure the roaming parameter for the wifi device. Roaming threshold in dBm. Difference in RSSI values for current AP and new AP before considering a roaming to the new AP bgsca…
columnInteger32.1.3.6.1.4.1.4346.11.11.27.2.1.1.15
flWlanWifiVapRssiChangeBgScan
Configure the roaming parameter for the wifi device. Background scan - RSSI change threshold in dBm Difference in RSSI value for the current AP communication before considering a…
columnInteger32.1.3.6.1.4.1.4346.11.11.27.2.1.1.16
flWlanWifiVapRssiThrshBgScan
Configure the roaming parameter for the wifi device. Background scan threshold in dBm. RSSI value below which the device starts background scans, if the network traffic is idle.
columnInteger32.1.3.6.1.4.1.4346.11.11.27.2.1.1.17
flWlanWifiVapScbManMac
Configure the mac address, the device uses in scb mode. Format of the value: {xx:xx:xx:xx:xx:xx}
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4346.11.11.27.2.1.1.18
flWlanWifiVapScbMode
Configure the way the device adopts its mac address.
columnEnumeration.1.3.6.1.4.1.4346.11.11.27.2.1.1.19
flWlanWifiVapFastEapolRetry
Configure the fast eapol retry mode. Just available in access point mode.
columnEnumeration.1.3.6.1.4.1.4346.11.11.27.2.1.1.2
flWlanWifiVapFragThreshold
Configure the wlan fragmentation threshold of the wifi device.
columnInteger32.1.3.6.1.4.1.4346.11.11.27.2.1.1.20
flWlanWifiVapTxPowerRadiated
Configure the wlan transmission power in dBm of the wifi device.
columnInteger32.1.3.6.1.4.1.4346.11.11.27.2.1.1.21
flWlanWifiVapChBandwidth
Configure the wlan channel bandwidth in MHz of the wifi device. The wlan channel bandwidth can be set to 20 MHz or to 40 MHz, if higher throuput is required. The drawback on 40MHz…
columnEnumeration.1.3.6.1.4.1.4346.11.11.27.2.1.1.23
flWlanWifiVapWlanCh
Configure the wlan channel of the wifi device. 2.4 GHz: (1-14) 5 GHz:(36) (40) (44) (48) (52) (56) (60) (64) (132) (136) (140) (149) (153) (157) (161) (165) (indoor8) (indoor16) (…
columnEnumeration.1.3.6.1.4.1.4346.11.11.27.2.1.1.24
flWlanWifiVap80211Mode
Configure the wlan ieee 802.11 mode of the wifi device. {a 5 GHz | b 2.4 GHz | bg 2.4 GHz | an 5 GHz | gn 2.4 GHz}
columnEnumeration.1.3.6.1.4.1.4346.11.11.27.2.1.1.25
flWlanWifiVapHwID
Shows the wlan radio hardware instance the wifi is derived from.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4346.11.11.27.2.1.1.26
flWlanWifiVapOpMode
Configure the operation mode of the wifi device.
columnEnumeration.1.3.6.1.4.1.4346.11.11.27.2.1.1.27
flWlanWifiVapStatus
Shows if the wifi interface is scanning or ready.
columnEnumeration.1.3.6.1.4.1.4346.11.11.27.2.1.1.28
flWlanWifiVapActiveProfile
Shows the active profile for this virtual access point.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4346.11.11.27.2.1.1.29
flWlanWifiVapHideSsid
Configure the hide ssid mode. Default: disable (meaning the ssid is broadcasted via beacon frames)
columnEnumeration.1.3.6.1.4.1.4346.11.11.27.2.1.1.3
flWlanWifiVapRowStatus
createAndGo(4) - create a new row/virtual access point entity. destroy(6) - Removes a row/virtual access point entity.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.4346.11.11.27.2.1.1.30
flWlanWifiVapExcessiveRetries
Configure the number of max. consecutive excessive retries before drop of connection.
columnInteger32.1.3.6.1.4.1.4346.11.11.27.2.1.1.4
flWlanWifiVapWdsBroadcast
Broadcast frames with unknown unicast destination to all ftb devices.
columnEnumeration.1.3.6.1.4.1.4346.11.11.27.2.1.1.5
flWlanWifiVapWdsAgingTime
The aging time in seconds for addresses learned from behind FTB devices can be configured. Min Value: 60 seconds Max Value: 4294967 seconds Note: This option is only relevant for …
columnInteger32.1.3.6.1.4.1.4346.11.11.27.2.1.1.6
flWlanWifiVapEnableState
Configure the vap wlan enable / disable state.
columnEnumeration.1.3.6.1.4.1.4346.11.11.27.2.1.1.7
flWlanWifiVapChScanlist
Configures the channel scan list. all(all channels), 1(channel-1), 2(channel-2), 3(channel-3), 4(channel-4), 5(channel-5), 6(channel-6), 7(channel-7), 8(channel-8), 9(channel-9), …
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4346.11.11.27.2.1.1.8
flWlanWifiVapMaxNumClients
Configures the maximal number of connectable clients.
columnInteger32.1.3.6.1.4.1.4346.11.11.27.2.1.1.9