flWlanWifiVapChScanlist
FL-MGD-INFRASTRUCT-MIB ·
.1.3.6.1.4.1.4346.11.11.27.2.1.1.8
Object
Configures the channel scan list. all(all channels), 1(channel-1), 2(channel-2), 3(channel-3), 4(channel-4), 5(channel-5), 6(channel-6), 7(channel-7), 8(channel-8), 9(channel-9), 10(channel-10), 11(channel-11), 12(channel-12), 13(channel-13), 14(channel-14), 36(channel-36), 40(channel-40), 44(channel-44), 48(channel-48), 52(channel-52), 56(channel-56), 60(channel-60), 64(channel-64), 132(channel-132), 136(channel-136), 140(channel-140), 149(channel-149), 153(channel-153), 157(channel-157), 161(channel-161), 165(channel-165)
Context
- MIB
- FL-MGD-INFRASTRUCT-MIB
- OID
.1.3.6.1.4.1.4346.11.11.27.2.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- flWlanWifiVapEntry
- Table
- flWlanWifiVapTable
- Siblings
- 29
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| flWlanWifiVapID Each VapID is the identification number of a virtual accesspoint instance {101, 102, ...} | column | Integer32 | .1.3.6.1.4.1.4346.11.11.27.2.1.1.1 |
| flWlanWifiVapStartScanning Starts a scan process | column | Enumeration | .1.3.6.1.4.1.4346.11.11.27.2.1.1.10 |
| flWlanWifiVapNetworkId Configure the Layer 3 instance the wifi device will be added to. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4346.11.11.27.2.1.1.11 |
| flWlanWifiVapManRoaming Format:
{normal 00:00:00:00:00:00}
{bssid xx:xx:xx:xx:xx:xx}
Examples:
1) Start a common scan process based on the best accesspoint using
the current configured ss… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4346.11.11.27.2.1.1.12 |
| flWlanWifiVapBgScanIdle Configure the roaming parameter for the wifi device.
Network idle time in milliseconds (ms). | column | Integer32 | .1.3.6.1.4.1.4346.11.11.27.2.1.1.13 |
| flWlanWifiVapRssiThrshForceScan Configure the roaming parameter for the wifi device.
Forced scan threshold in dBm.
RSSI value below which the device starts a forced scan
(without respecting the network traffic). | column | Integer32 | .1.3.6.1.4.1.4346.11.11.27.2.1.1.14 |
| flWlanWifiVapRssiChangeRoam Configure the roaming parameter for the wifi device.
Roaming threshold in dBm.
Difference in RSSI values for current AP and new AP before
considering a roaming to the new AP bgsca… | column | Integer32 | .1.3.6.1.4.1.4346.11.11.27.2.1.1.15 |
| flWlanWifiVapRssiChangeBgScan Configure the roaming parameter for the wifi device.
Background scan - RSSI change threshold in dBm
Difference in RSSI value for the current AP communication
before considering a… | column | Integer32 | .1.3.6.1.4.1.4346.11.11.27.2.1.1.16 |
| flWlanWifiVapRssiThrshBgScan Configure the roaming parameter for the wifi device.
Background scan threshold in dBm.
RSSI value below which the device starts background scans,
if the network traffic is idle. | column | Integer32 | .1.3.6.1.4.1.4346.11.11.27.2.1.1.17 |
| flWlanWifiVapScbManMac Configure the mac address, the device uses in scb mode.
Format of the value: {xx:xx:xx:xx:xx:xx} | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4346.11.11.27.2.1.1.18 |
| flWlanWifiVapScbMode Configure the way the device adopts its mac address. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.27.2.1.1.19 |
| flWlanWifiVapFastEapolRetry Configure the fast eapol retry mode.
Just available in access point mode. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.27.2.1.1.2 |
| flWlanWifiVapFragThreshold Configure the wlan fragmentation threshold of the wifi device. | column | Integer32 | .1.3.6.1.4.1.4346.11.11.27.2.1.1.20 |
| flWlanWifiVapTxPowerRadiated Configure the wlan transmission power in dBm of the wifi device. | column | Integer32 | .1.3.6.1.4.1.4346.11.11.27.2.1.1.21 |
| flWlanWifiVapCurrentTxPowerRadiated Shows the radiated transmit power in dBm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4346.11.11.27.2.1.1.22 |
| flWlanWifiVapChBandwidth Configure the wlan channel bandwidth in MHz of the wifi device.
The wlan channel bandwidth can be set to 20 MHz or to 40 MHz,
if higher throuput is required. The drawback on 40MHz… | column | Enumeration | .1.3.6.1.4.1.4346.11.11.27.2.1.1.23 |
| flWlanWifiVapWlanCh Configure the wlan channel of the wifi device.
2.4 GHz: (1-14)
5 GHz:(36) (40) (44) (48) (52) (56) (60) (64) (132) (136) (140)
(149) (153) (157) (161) (165) (indoor8) (indoor16) (… | column | Enumeration | .1.3.6.1.4.1.4346.11.11.27.2.1.1.24 |
| flWlanWifiVap80211Mode Configure the wlan ieee 802.11 mode of the wifi device.
{a 5 GHz | b 2.4 GHz | bg 2.4 GHz | an 5 GHz | gn 2.4 GHz} | column | Enumeration | .1.3.6.1.4.1.4346.11.11.27.2.1.1.25 |
| flWlanWifiVapHwID Shows the wlan radio hardware instance the wifi is derived from. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4346.11.11.27.2.1.1.26 |
| flWlanWifiVapOpMode Configure the operation mode of the wifi device. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.27.2.1.1.27 |
| flWlanWifiVapStatus Shows if the wifi interface is scanning or ready. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.27.2.1.1.28 |
| flWlanWifiVapActiveProfile Shows the active profile for this virtual access point. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4346.11.11.27.2.1.1.29 |
| flWlanWifiVapHideSsid Configure the hide ssid mode.
Default: disable (meaning the ssid is broadcasted via beacon frames) | column | Enumeration | .1.3.6.1.4.1.4346.11.11.27.2.1.1.3 |
| flWlanWifiVapRowStatus createAndGo(4) - create a new row/virtual access point entity.
destroy(6) - Removes a row/virtual access point entity. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4346.11.11.27.2.1.1.30 |
| flWlanWifiVapExcessiveRetries Configure the number of max. consecutive excessive retries before drop of connection. | column | Integer32 | .1.3.6.1.4.1.4346.11.11.27.2.1.1.4 |
| flWlanWifiVapWdsBroadcast Broadcast frames with unknown unicast destination to all ftb devices. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.27.2.1.1.5 |
| flWlanWifiVapWdsAgingTime The aging time in seconds for addresses learned from behind FTB devices can be configured.
Min Value: 60 seconds
Max Value: 4294967 seconds
Note: This option is only relevant for … | column | Integer32 | .1.3.6.1.4.1.4346.11.11.27.2.1.1.6 |
| flWlanWifiVapEnableState Configure the vap wlan enable / disable state. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.27.2.1.1.7 |
| flWlanWifiVapMaxNumClients Configures the maximal number of connectable clients. | column | Integer32 | .1.3.6.1.4.1.4346.11.11.27.2.1.1.9 |