sysInterfaceStatus

F5-BIGIP-SYSTEM-MIB · .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.17
MIB view Table view

Object

column Enumeration 
The current state of the specified interface.
up            - has link and is initialized;  
down          - has no link and is initialized;
uninitialized - has not been initialized;	
unpopulated   - interface not physically populated.

Context

MIB
F5-BIGIP-SYSTEM-MIB
OID
.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.17
Type
column
Access
readonly
Status
current
Parent
sysInterfaceEntry
Table
sysInterfaceTable
Siblings
20

Syntax

Enumeration

Values & Constraints

Enumerated Values
0up
1down
3uninitialized
5unpopulated

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sysInterfaceName
The name of an interface.
columnF5-BIGIP-COMMON-MIBLongDisplayString.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.1
sysInterfaceFlowCtrlReq
The request pause state of the specified interface. none - no pause; txrx - pause all data flow; tx - pause out going data flow; rx - pause in coming data flow.
columnEnumeration.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.10
sysInterfaceStpLink
The STP link types for the specified interface.
columnEnumeration.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.11
sysInterfaceStpEdge
The edge-port state for the specified interface is enabled.
columnEnumeration.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.12
sysInterfaceStpEdgeActive
The active edge-port state for the specified interface is enabled.
columnEnumeration.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.13
sysInterfaceStpAuto
The auto edge-port detection state for the specified interface is enabled.
columnEnumeration.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.14
sysInterfaceStpEnable
The STP state for the specified interface is enabled.
columnEnumeration.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.15
sysInterfaceStpReset
The STP protocol detection reset state for the specified interface is enabled.
columnEnumeration.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.16
sysInterfaceComboPort
The state which indicates whether or not the specified interface is a dual media port supporting both fixed copper and SFP.
columnEnumeration.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.18
sysInterfacePreferSfp
The state which indicates whether or not SFP is the preferred media. This is only used only for dual media ports.
columnEnumeration.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.19
sysInterfaceMediaMaxSpeed
The best possible media speed in MBPS for the specified interface.
columnRFC1155-SMIGauge.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.2
sysInterfaceSfpMedia
The state indicating whether or not the specified interface supports SFP media.
columnEnumeration.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.20
sysInterfacePhyMaster
The configured SFP media type of the specified interface.
columnEnumeration.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.21
sysInterfaceMediaMaxDuplex
The best possible media duplex mode for the specified interface. half - Force half duplex; full - Force full duplex; none - All media is deselected.
columnEnumeration.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.3
sysInterfaceMediaActiveSpeed
The current active media speed for the specified interface.
columnRFC1155-SMIGauge.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.4
sysInterfaceMediaActiveDuplex
The active media duplex mode for the specified interface. half - Force half duplex; full - Force full duplex; none - All media is deselected.
columnEnumeration.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.5
sysInterfaceMacAddr
The MAC address of the specified interface.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.6
sysInterfaceMtu
The maximum transmission unit size of datagram which can be sent/received on the specified interface.
columnRFC1155-SMIGauge.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.7
sysInterfaceEnabled
The state of the specified interface, whether it is enabled.
columnEnumeration.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.8
sysInterfaceLearnMode
The learn mode of the specified interface.
columnEnumeration.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.9