sysInterfaceFlowCtrlReq
F5-BIGIP-SYSTEM-MIB ·
.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.10
Object
column
Enumeration
The request pause state of the specified interface. none - no pause; txrx - pause all data flow; tx - pause out going data flow; rx - pause in coming data flow.
Context
- MIB
- F5-BIGIP-SYSTEM-MIB
- OID
.1.3.6.1.4.1.3375.2.1.2.4.1.2.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- sysInterfaceEntry
- Table
- sysInterfaceTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | none |
1 | txrx |
2 | tx |
3 | rx |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sysInterfaceName The name of an interface. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.1 |
| sysInterfaceStpLink The STP link types for the specified interface. | column | Enumeration | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.11 |
| sysInterfaceStpEdge The edge-port state for the specified interface is enabled. | column | Enumeration | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.12 |
| sysInterfaceStpEdgeActive The active edge-port state for the specified interface is enabled. | column | Enumeration | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.13 |
| sysInterfaceStpAuto The auto edge-port detection state for the specified interface is enabled. | column | Enumeration | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.14 |
| sysInterfaceStpEnable The STP state for the specified interface is enabled. | column | Enumeration | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.15 |
| sysInterfaceStpReset The STP protocol detection reset state for the specified interface is enabled. | column | Enumeration | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.16 |
| sysInterfaceStatus The current state of the specified interface.
up - has link and is initialized;
down - has no link and is initialized;
uninitialized - has not been initializ… | column | Enumeration | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.17 |
| sysInterfaceComboPort The state which indicates whether or not the specified interface is a dual media
port supporting both fixed copper and SFP. | column | Enumeration | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.18 |
| sysInterfacePreferSfp The state which indicates whether or not SFP is the preferred media.
This is only used only for dual media ports. | column | Enumeration | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.19 |
| sysInterfaceMediaMaxSpeed The best possible media speed in MBPS for the specified interface. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.2 |
| sysInterfaceSfpMedia The state indicating whether or not the specified interface supports SFP media. | column | Enumeration | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.20 |
| sysInterfacePhyMaster The configured SFP media type of the specified interface. | column | Enumeration | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.21 |
| sysInterfaceMediaMaxDuplex The best possible media duplex mode for the specified interface.
half - Force half duplex;
full - Force full duplex;
none - All media is deselected. | column | Enumeration | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.3 |
| sysInterfaceMediaActiveSpeed The current active media speed for the specified interface. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.4 |
| sysInterfaceMediaActiveDuplex The active media duplex mode for the specified interface.
half - Force half duplex;
full - Force full duplex;
none - All media is deselected. | column | Enumeration | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.5 |
| sysInterfaceMacAddr The MAC address of the specified interface. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.6 |
| sysInterfaceMtu The maximum transmission unit size of datagram which can be
sent/received on the specified interface. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.7 |
| sysInterfaceEnabled The state of the specified interface, whether it is enabled. | column | Enumeration | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.8 |
| sysInterfaceLearnMode The learn mode of the specified interface. | column | Enumeration | .1.3.6.1.4.1.3375.2.1.2.4.1.2.1.9 |