sysAttrPacketFilterEstablished

F5-BIGIP-SYSTEM-MIB · .1.3.6.1.4.1.3375.2.1.1.1.1.24
MIB view Table view

Object

scalar Enumeration 
The status of filter established feature. This option 
controls whether or not filter rules are applied to 
packets which are part of an existing, established 
connection or pseudo-connection. When this option is 
enabled, all ingress packets are subject to filter 
rules. When the option is disabled, filter rules are not 
applied to packets which are part of an existing 
connection. That is useful to prevent filtering of reply 
traffic. This option is disabled by default.

Context

MIB
F5-BIGIP-SYSTEM-MIB
OID
.1.3.6.1.4.1.3375.2.1.1.1.1.24
Type
scalar
Access
readonly
Status
current
Parent
sysGlobalAttr
Siblings
28

Syntax

Enumeration

Values & Constraints

Enumerated Values
0disabled
1enabled

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sysAttrArpMaxEntries
The maximum number of dynamic entries which can be exist at one time.
scalarRFC1155-SMIGauge.1.3.6.1.4.1.3375.2.1.1.1.1.1
sysAttrFailoverActiveMode deprecated
Deprecated! The redundant pair mode. Enabling is to use active-active mode. By default this is disable, active-standby mode is used.
scalarEnumeration.1.3.6.1.4.1.3375.2.1.1.1.1.10
sysAttrFailoverForceActive deprecated
Deprecated! The behavior of failover. Enabling makes failover daemon always attempt to become the active unit.
scalarEnumeration.1.3.6.1.4.1.3375.2.1.1.1.1.11
sysAttrFailoverForceStandby deprecated
Deprecated! The behavior of failover. Enabling makes failover daemon go to standby whenever is senses its peer alive.
scalarEnumeration.1.3.6.1.4.1.3375.2.1.1.1.1.12
sysAttrFailoverIsRedundant
The redundant mode of the system.
scalarEnumeration.1.3.6.1.4.1.3375.2.1.1.1.1.13
sysAttrFailoverMemoryRestartPercent deprecated
Deprecated! Refer sysAttrConnAdaptiveReaperHiwat and sysAttrConnAdaptiveReaperLowat for memory threshold when TMM (Traffic Management Module) takes actions. The percentage of m…
scalarRFC1155-SMIGauge.1.3.6.1.4.1.3375.2.1.1.1.1.14
sysAttrFailoverNetwork
The behavior of using the network as a backup to, or instead of, the serial line for failover if this value is 1. By default this feature is disabled.
scalarEnumeration.1.3.6.1.4.1.3375.2.1.1.1.1.15
sysAttrFailoverStandbyLinkDownTime
How long the external link is held down when the unit fails over and becomes standby. This is so an external switch will update its L2 tables and use the newly active unit's li…
scalarRFC1155-SMIGauge.1.3.6.1.4.1.3375.2.1.1.1.1.16
sysAttrFailoverSslhardware deprecated
Deprecated! This feature has been eliminated. Enables/disables the action prescribed by sysAttrFailoverSslhardwareAction (failover or reboot).
scalarEnumeration.1.3.6.1.4.1.3375.2.1.1.1.1.17
sysAttrFailoverSslhardwareAction deprecated
Deprecated! This feature has been eliminated. This is controlled by the sysAttrFailoverSslhardware. If sysAttrFailoverSslhardware is enabled, the action prescribed here will ta…
scalarEnumeration.1.3.6.1.4.1.3375.2.1.1.1.1.18
sysAttrFailoverUnitMask deprecated
Deprecated! Refer to sysCmTrafficGroupStatus, sysCmFailoverStatus, and sysCmFailoverStatusDetails. This data indicates whether the machine is active or standby. The value for this…
scalarRFC1155-SMIGauge.1.3.6.1.4.1.3375.2.1.1.1.1.19
sysAttrArpAddReciprocal
When enabled add the IP/MAC address of an ARP requester into the ARP table. Enabling this field can allow a malicious user on the local net to poison the ARP cache. Disabling i…
scalarEnumeration.1.3.6.1.4.1.3375.2.1.1.1.1.2
sysAttrFailoverUnitId deprecated
Deprecated! Refer to sysCmTrafficGroupStatus, sysCmFailoverStatus, and sysCmFailoverStatusDetails. The controller unique unit id, 1 or 2, in the event that network communication …
scalarRFC1155-SMIGauge.1.3.6.1.4.1.3375.2.1.1.1.1.20
sysAttrModeMaint
The state of system maintenance mode. disable - not in maintenance mode; enable - maintenance mode.
scalarEnumeration.1.3.6.1.4.1.3375.2.1.1.1.1.21
sysAttrPacketFilter
This option globally enables or disables processing of all packet filter options, including the rule list. The packet filter is enabled by default.
scalarEnumeration.1.3.6.1.4.1.3375.2.1.1.1.1.22
sysAttrPacketFilterAllowImportantIcmp
This option causes the packet filter to automatically accept a number of important ICMP types without requiring the addition of a rule to handle them. Acceptance of ICMP traffi…
scalarEnumeration.1.3.6.1.4.1.3375.2.1.1.1.1.23
sysAttrPacketFilterDefaultAction
The filter default action. This variable controls how to handle packets which did not match any rules. It can be either accept, discard or reject. The default value is accept.
scalarEnumeration.1.3.6.1.4.1.3375.2.1.1.1.1.25
sysAttrPacketFilterSendIcmpErrors
The feature to control the kind of errors to send for REJECT rules.
scalarEnumeration.1.3.6.1.4.1.3375.2.1.1.1.1.26
sysAttrPvaAcceleration
The type of hardware acceleration desired.
scalarEnumeration.1.3.6.1.4.1.3375.2.1.1.1.1.27
sysAttrVlanFDBTimeout
Controls how long before an entry expires in the L2 forwarding database.
scalarRFC1155-SMIGauge.1.3.6.1.4.1.3375.2.1.1.1.1.28
sysAttrWatchdogState
The state of watch dog feature - a hardware device that monitors the system for hardware failure.
scalarEnumeration.1.3.6.1.4.1.3375.2.1.1.1.1.29
sysAttrArpTimeout
Determine how long (in seconds) ARP entries are kept in the cache before being marked stale.
scalarRFC1155-SMIGauge.1.3.6.1.4.1.3375.2.1.1.1.1.3
sysAttrArpRetries
The maximum number of times to request an ARP before giving up and marking the IP address as unavailable.
scalarRFC1155-SMIGauge.1.3.6.1.4.1.3375.2.1.1.1.1.4
sysAttrBootQuiet
The behavior of boot message display during a reboot of the system. Enabling this suppresses the messages. Disabling this displays messages.
scalarEnumeration.1.3.6.1.4.1.3375.2.1.1.1.1.5
sysAttrConfigsyncState deprecated
Deprecated! Replaced by sysCmSyncStatus and sysCmSyncStatusDetails. Enumerated state between peer systems. -1 - uninitialized or disabled config state 0 - Synchronized 1 - Local c…
scalarF5-BIGIP-COMMON-MIBLongDisplayString.1.3.6.1.4.1.3375.2.1.1.1.1.6
sysAttrConnAdaptiveReaperHiwat
The high threshold for dynamic reaper, at which point no new connection will be allowed.
scalarRFC1155-SMIGauge.1.3.6.1.4.1.3375.2.1.1.1.1.7
sysAttrConnAdaptiveReaperLowat
The low threshold for dynamic reaper, at which point the reaper will kick in.
scalarRFC1155-SMIGauge.1.3.6.1.4.1.3375.2.1.1.1.1.8
sysAttrConnAutoLasthop
The behavior of automatic last hop pools.
scalarEnumeration.1.3.6.1.4.1.3375.2.1.1.1.1.9