sysAttrFailoverActiveMode
F5-BIGIP-SYSTEM-MIB ·
.1.3.6.1.4.1.3375.2.1.1.1.1.10
Object
scalar
deprecated
Enumeration
Deprecated! The redundant pair mode. Enabling is to use active-active mode. By default this is disable, active-standby mode is used.
Context
- MIB
- F5-BIGIP-SYSTEM-MIB
- OID
.1.3.6.1.4.1.3375.2.1.1.1.1.10- Type
- scalar
- Access
- readonly
- Status
- deprecated
- Parent
- sysGlobalAttr
- Siblings
- 28
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sysAttrArpMaxEntries The maximum number of dynamic entries which can be exist
at one time. | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.1.1.1.1.1 |
| sysAttrFailoverForceActive deprecated Deprecated! The behavior of failover. Enabling makes failover daemon
always attempt to become the active unit. | scalar | Enumeration | .1.3.6.1.4.1.3375.2.1.1.1.1.11 |
| sysAttrFailoverForceStandby deprecated Deprecated! The behavior of failover. Enabling makes failover daemon
go to standby whenever is senses its peer alive. | scalar | Enumeration | .1.3.6.1.4.1.3375.2.1.1.1.1.12 |
| sysAttrFailoverIsRedundant The redundant mode of the system. | scalar | Enumeration | .1.3.6.1.4.1.3375.2.1.1.1.1.13 |
| sysAttrFailoverMemoryRestartPercent deprecated Deprecated! Refer sysAttrConnAdaptiveReaperHiwat and sysAttrConnAdaptiveReaperLowat
for memory threshold when TMM (Traffic Management Module) takes actions.
The percentage of m… | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.1.1.1.1.14 |
| sysAttrFailoverNetwork The behavior of using the network as a backup to, or
instead of, the serial line for failover if this value
is 1. By default this feature is disabled. | scalar | Enumeration | .1.3.6.1.4.1.3375.2.1.1.1.1.15 |
| sysAttrFailoverStandbyLinkDownTime How long the external link is held down when the unit
fails over and becomes standby. This is so an external
switch will update its L2 tables and use the newly active
unit's li… | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.1.1.1.1.16 |
| sysAttrFailoverSslhardware deprecated Deprecated! This feature has been eliminated.
Enables/disables the action prescribed by
sysAttrFailoverSslhardwareAction (failover or reboot). | scalar | Enumeration | .1.3.6.1.4.1.3375.2.1.1.1.1.17 |
| sysAttrFailoverSslhardwareAction deprecated Deprecated! This feature has been eliminated.
This is controlled by the sysAttrFailoverSslhardware.
If sysAttrFailoverSslhardware is enabled, the action
prescribed here will ta… | scalar | Enumeration | .1.3.6.1.4.1.3375.2.1.1.1.1.18 |
| sysAttrFailoverUnitMask deprecated Deprecated! Refer to sysCmTrafficGroupStatus, sysCmFailoverStatus, and
sysCmFailoverStatusDetails.
This data indicates whether the machine is active or standby.
The value for this… | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.1.1.1.1.19 |
| sysAttrArpAddReciprocal When enabled add the IP/MAC address of an ARP requester
into the ARP table. Enabling this field can allow a malicious
user on the local net to poison the ARP cache. Disabling
i… | scalar | Enumeration | .1.3.6.1.4.1.3375.2.1.1.1.1.2 |
| sysAttrFailoverUnitId deprecated Deprecated! Refer to sysCmTrafficGroupStatus, sysCmFailoverStatus, and
sysCmFailoverStatusDetails.
The controller unique unit id, 1 or 2, in the event that
network communication … | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.1.1.1.1.20 |
| sysAttrModeMaint The state of system maintenance mode.
disable - not in maintenance mode;
enable - maintenance mode. | scalar | Enumeration | .1.3.6.1.4.1.3375.2.1.1.1.1.21 |
| sysAttrPacketFilter This option globally enables or disables processing of all
packet filter options, including the rule list. The packet
filter is enabled by default. | scalar | Enumeration | .1.3.6.1.4.1.3375.2.1.1.1.1.22 |
| sysAttrPacketFilterAllowImportantIcmp This option causes the packet filter to automatically
accept a number of important ICMP types without requiring
the addition of a rule to handle them. Acceptance of ICMP
traffi… | scalar | Enumeration | .1.3.6.1.4.1.3375.2.1.1.1.1.23 |
| sysAttrPacketFilterEstablished The status of filter established feature. This option
controls whether or not filter rules are applied to
packets which are part of an existing, established
connection or pseud… | scalar | Enumeration | .1.3.6.1.4.1.3375.2.1.1.1.1.24 |
| sysAttrPacketFilterDefaultAction The filter default action. This variable controls how to
handle packets which did not match any rules. It can be
either accept, discard or reject. The default value is
accept. | scalar | Enumeration | .1.3.6.1.4.1.3375.2.1.1.1.1.25 |
| sysAttrPacketFilterSendIcmpErrors The feature to control the kind of errors to send for REJECT rules. | scalar | Enumeration | .1.3.6.1.4.1.3375.2.1.1.1.1.26 |
| sysAttrPvaAcceleration The type of hardware acceleration desired. | scalar | Enumeration | .1.3.6.1.4.1.3375.2.1.1.1.1.27 |
| sysAttrVlanFDBTimeout Controls how long before an entry expires in the L2 forwarding
database. | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.1.1.1.1.28 |
| sysAttrWatchdogState The state of watch dog feature - a hardware device that
monitors the system for hardware failure. | scalar | Enumeration | .1.3.6.1.4.1.3375.2.1.1.1.1.29 |
| sysAttrArpTimeout Determine how long (in seconds) ARP entries are kept in
the cache before being marked stale. | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.1.1.1.1.3 |
| sysAttrArpRetries The maximum number of times to request an ARP before
giving up and marking the IP address as unavailable. | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.1.1.1.1.4 |
| sysAttrBootQuiet The behavior of boot message display during a reboot of
the system. Enabling this suppresses the messages.
Disabling this displays messages. | scalar | Enumeration | .1.3.6.1.4.1.3375.2.1.1.1.1.5 |
| sysAttrConfigsyncState deprecated Deprecated! Replaced by sysCmSyncStatus and sysCmSyncStatusDetails.
Enumerated state between peer systems.
-1 - uninitialized or disabled config state
0 - Synchronized
1 - Local c… | scalar | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.1.1.1.1.6 |
| sysAttrConnAdaptiveReaperHiwat The high threshold for dynamic reaper, at which point no
new connection will be allowed. | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.1.1.1.1.7 |
| sysAttrConnAdaptiveReaperLowat The low threshold for dynamic reaper, at which point the
reaper will kick in. | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.1.1.1.1.8 |
| sysAttrConnAutoLasthop The behavior of automatic last hop pools. | scalar | Enumeration | .1.3.6.1.4.1.3375.2.1.1.1.1.9 |