ltmDiametersessionProfileVendorId
F5-BIGIP-LOCAL-MIB ·
.1.3.6.1.4.1.3375.2.2.6.39.1.2.1.30
Object
column
RFC1155-SMIGauge
Specifies the vendor identification number assigned to your diameter server by the Internet Assigned Numbers Authority (IANA). The default is 0.
Context
- MIB
- F5-BIGIP-LOCAL-MIB
- OID
.1.3.6.1.4.1.3375.2.2.6.39.1.2.1.30- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ltmDiametersessionProfileEntry
- Table
- ltmDiametersessionProfileTable
- Siblings
- 49
Syntax
RFC1155-SMIGauge
- Source
- RFC1155-SMIGauge
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ltmDiametersessionProfileName The Name of the diametersession profile. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.1 |
| ltmDiametersessionProfileRetransmissionAction Specifies the action to be
performed when retransmission is triggered for a request message.
disable: retransmission is disabled busy: A busy answer is sent to
the originator of t… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.10 |
| ltmDiametersessionProfileArrayRetransmissionErrorCode Specifies a list of
DIAMETER error codes that if an answer message is received
containing one of the listed error codes, the corresponding
request will be retransmitted as directe… | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.11 |
| ltmDiametersessionProfileRetransmissionQueueMaxMessages Specifies the
maximum number of messages that may be held in the retransmission
message queue. If a request message is received that is enabled
for retransmission and the retransm… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.12 |
| ltmDiametersessionProfileRetransmissionQueueMaxBytes Specifies the maximum
number of bytes that may be held in the retransmission message
queue. If a request message is received that is enabled for
retransmission and the retransmiss… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.13 |
| ltmDiametersessionProfileRetransmissionQueueLimitHigh Specifies the high
watermark for the retransmission queue in percent. If the number
of messages or bytes in the retransmission queue for a connection
exceeds the high watermark, t… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.14 |
| ltmDiametersessionProfileRetransmissionQueueLimitLow Specifies the low
watermark for the retransmission queue in percent. If the number
of messages or bytes in the retransmission queue for a connection
drops below the low watermark,… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.15 |
| ltmDiametersessionProfileDiscardUnroutable If enabled,
discard unroutable messages. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.16 |
| ltmDiametersessionProfileLoopDetection If enabled, detect and
reject (error response) looped request messages. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.17 |
| ltmDiametersessionProfileWatchdogTimeout Specifies the watchdog timeout in
seconds. This setting specifies the number of seconds that a
connection is idle before the device watchdog request is sent. The
default value is … | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.18 |
| ltmDiametersessionProfileMaxMessageSize Maximum bytes that will be allowed
for the messages. The default value is 0, which means no such
restriction is allowed in BIG-IP. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.19 |
| ltmDiametersessionProfileConfigSource The state that specifies whether this is a base/pre-configured profile
or user defined profile. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.2 |
| ltmDiametersessionProfilePersistType Specifies the type of the persistence.
None - Persistence is disabled
AVP - To persist based on avp in the message.
Custom - To persist based on the custom key specified using iRu… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.20 |
| ltmDiametersessionProfilePersistAvp Specifies the Diameter AVP that is used
for persistence. The format is avp[index] for a single AVP or
a[x]:b[y]:c[z]:d[w] for a grouped AVP. There may be at most 4 AVPs
in a group… | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.21 |
| ltmDiametersessionProfilePersistTimeout Indicates the timeout value for
persistence entries in seconds. Its recommended to have the
persist-timeout to be greater than transaction timeout, specified
in the Diameter route… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.22 |
| ltmDiametersessionProfileOriginHostRewrite Rewrites the Origin-Host AVP to
the specified value on the egress. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.23 |
| ltmDiametersessionProfileOriginRealmRewrite Rewrites the Origin-Host AVP to
the specified value on the egress. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.24 |
| ltmDiametersessionProfileDestHostRewrite Rewrites the Destination-Host AVP
to the specified value on the egress. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.25 |
| ltmDiametersessionProfileDestRealmRewrite Rewrites the Destination-Realm AVP
to the specified value on the egress. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.26 |
| ltmDiametersessionProfileOriginHost Specifies the identifier of the
originating server in the form siteserver.f5.com. Must specify the
origin-host. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.27 |
| ltmDiametersessionProfileOriginRealm Origin-Realm AVP data. Must specify the
origin-realm. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.28 |
| ltmDiametersessionProfileHostIpAddress Specifies the IP address of the
diameter server. If no value is specified, the system uses the
BIG-IP system's IP address on the VLAN that the system uses to
generate traffic to t… | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.29 |
| ltmDiametersessionProfileDefaultName The name of the profile from which the specified profile derives
its attribute default values. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.3 |
| ltmDiametersessionProfileFirmwareRevision Specifies the firmware revision of
the issuing device to inform a diameter peer. The default value
is 1. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.31 |
| ltmDiametersessionProfileProductName Specifies the vendor-assigned name for
the product. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.32 |
| ltmDiametersessionProfileAuthApplicationId Specifies the Authentication and
Authorization identifier for a specific application, as specified
in RFC 6733. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.33 |
| ltmDiametersessionProfileAcctApplicationId Specifies the Accounting
identifier for a specific application, as specified in RFC
6733. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.34 |
| ltmDiametersessionProfileArrayAuthApplicationId Specifies a space separted
list of Authentication and Authorization identifiers for a
specific application, as specified in RFC 6733. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.35 |
| ltmDiametersessionProfileArrayAcctApplicationId Specifies a space separated
list of Accounting identifiers for a specific application, as
specified in RFC 6733. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.36 |
| ltmDiametersessionProfileVendorSpecificVendorId Specifies the vendor
identification number for the vendor-specific application. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.37 |
| ltmDiametersessionProfileVendorSpecificAuthApplicationId Specifies the
authentication identification number for the vendor-specific
application. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.38 |
| ltmDiametersessionProfileVendorSpecificAcctApplicationId Specifies the
accounting identification number for the vendor-specific
application. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.39 |
| ltmDiametersessionProfileRouteUnconfiguredPeers When it is
enabled, unconfigured peers is added to the route table. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.4 |
| ltmDiametersessionProfilePeerDelayCriticalLimit Specifies the critical limit
threshold for peer delay. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.40 |
| ltmDiametersessionProfileEgressCriticalMessageRateLimit Specifies the
critical message rate limit threshold for messages sent to peer. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.41 |
| ltmDiametersessionProfileEgressMajorMessageRateLimit Specifies the
major message rate limit threshold for messages sent to peer. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.42 |
| ltmDiametersessionProfileIngressCriticalMessageRateLimit Specifies the
critical message rate limit threshold for messages received from peer. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.43 |
| ltmDiametersessionProfileIngressMajorMessageRateLimit Specifies the
major message rate limit threshold for messages received peer. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.44 |
| ltmDiametersessionProfileDynamicRouteInsertion If enabled,
dynamically add routes for connected peers. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.45 |
| ltmDiametersessionProfileDynamicRouteLookup If enabled,
route messages based on dynamically added routes. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.46 |
| ltmDiametersessionProfileDynamicRouteTimeout Specifies the duration after
which dynamic routes will be removed after the releated peer
connections are closed. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.47 |
| ltmDiametersessionProfilePeerErrorsMajorThreshold Specifies the major limit
threshold for peer errors. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.48 |
| ltmDiametersessionProfilePeerTimeoutsMajorThreshold Specifies the major limit
threshold for peer timeouts. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.49 |
| ltmDiametersessionProfileHandshakeTimeout Indicates the number of seconds
before the handshake times out to a peer. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.5 |
| ltmDiametersessionProfileDisconnectPeerAction Specifies the type of action
taken when Disconnect Peer Request received from peer.
None: Terminates connection on receiving DPR.Connection can be re-established between peer… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.50 |
| ltmDiametersessionProfileMaxRetransmissions Number of times, the peer tries to
retransmit the message. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.6 |
| ltmDiametersessionProfileMaxWatchdogFailures Specifies the maximum number of
device watchdog failures that the traffic management system can
take before it tears down the connection. After the system
receives this number of … | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.7 |
| ltmDiametersessionProfileResetOnTimeout When it is enabled
and the watchdog failures exceed the max watchdog failure, the
system resets the connection. The default value is enabled. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.8 |
| ltmDiametersessionProfileRetransmissionTimeout Specifies the retransmission
timeout in seconds. This setting specifies the number of seconds
the BIG-IP waits to retransmit the request messages if it does not
receive the corres… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.39.1.2.1.9 |