locActiveTxModulation
ExaltComProducts ·
.1.3.6.1.4.1.25651.1.2.4.3.1.101
Object
scalar
ExaltCommAcmModulationT
The active Tx modulation when ACM is enabled. See Web, Monitor, Performance, Tx modulation.
Context
- MIB
- ExaltComProducts
- OID
.1.3.6.1.4.1.25651.1.2.4.3.1.101- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- perfLocal
- Siblings
- 32
Values & Constraints
Type Values
-9999 | notAvailable |
0 | mQPSK |
1 | m16QAM |
2 | m64QAM |
3 | m128QAM |
4 | m256QAM |
5 | m32QAM |
6 | m512QAM |
7 | m8PSK |
8 | mBPSK2 |
9 | mQPSK2 |
10 | m8PSK2 |
11 | m32QAM2 |
12 | m64QAM2 |
13 | m128QAM2 |
14 | m16QAM2 |
15 | m512QAM2 |
16 | mQPSK3 |
17 | mBPSK3 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| locCurrentBER The Curent Bit-Error Rate as scaled integer for local radio.
The BER multiplied by 1,000,000.
If the link is operating perfectly, this should indicate zero.
See Web, Monitor, Perf… | scalar | BER * 1000000.0 SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25651.1.2.4.3.1.1 |
| locMinRSLstr The Minimum RSL value as a string. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.25651.1.2.4.3.1.10 |
| locMaximumTxModulation The highest/maximum Tx modulation when ACM is enabled since the last counter reset.
See Web, Monitor, Performance, Tx modulation. | scalar | ExaltCommAcmModulationT | .1.3.6.1.4.1.25651.1.2.4.3.1.100 |
| locResetStats Write 'reset' to locResetStats to clear the Performance statistics. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.25651.1.2.4.3.1.1000 |
| locMinimumTxModulation The lowest/minimum Tx modulation when ACM is enabled since the last counter reset.
See Web, Monitor, Performance, Tx modulation. | scalar | ExaltCommAcmModulationT | .1.3.6.1.4.1.25651.1.2.4.3.1.102 |
| locMaximumRxModulation The highest/maximum Rx modulation when ACM is enabled since the last counter reset.
See Web, Monitor, Performance, Rx modulation. | scalar | ExaltCommAcmModulationT | .1.3.6.1.4.1.25651.1.2.4.3.1.103 |
| locActiveRxModulation The active Rx modulation when ACM is enabled.
See Web, Monitor, Performance, Rx modulation. | scalar | ExaltCommAcmModulationT | .1.3.6.1.4.1.25651.1.2.4.3.1.104 |
| locMinimumRxModulation The lowest/minimum Rx modulation when ACM is enabled since the last counter reset.
See Web, Monitor, Performance, Rx modulation. | scalar | ExaltCommAcmModulationT | .1.3.6.1.4.1.25651.1.2.4.3.1.105 |
| locMaximumTxEthernetThroughput The highest/maximum Tx Ethernet throughput in Mbps when ACM is enabled
since the last counter reset.
See Web, Monitor, Performance, Tx Ethernet Throughput. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25651.1.2.4.3.1.106 |
| locActiveTxEthernetThroughput The active Tx Ethernet throughput in Mbps when ACM is enabled.
See Web, Monitor, Performance, Tx Ethernet Throughput. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25651.1.2.4.3.1.107 |
| locMinimumTxEthernetThroughput The lowest/minimum Tx Ethernet throughput in Mbps when ACM is enabled
since the last counter reset.
See Web, Monitor, Performance, Tx Ethernet Throughput. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25651.1.2.4.3.1.108 |
| locMaximumRxEthernetThroughput The highest/maximum Rx Ethernet throughput in Mbps when ACM is enabled
since the last counter reset.
See Web, Monitor, Performance, Rx Ethernet Throughput. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25651.1.2.4.3.1.109 |
| locMinRSLtimestamp The Minimum RSL Timestamp indicates the date and time when the Minimum RSL occurred.
See Web, Monitor, Performance, Minimum RSL Timestamp | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.25651.1.2.4.3.1.11 |
| locActiveRxEthernetThroughput The active Rx Ethernet throughput in Mbps when ACM is enabled.
See Web, Monitor, Performance, Rx Ethernet Throughput. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25651.1.2.4.3.1.110 |
| locMinimumRxEthernetThroughput The lowest/minimum Rx Ethernet throughput in Mbps when ACM is enabled
since the last counter reset.
See Web, Monitor, Performance, Rx Ethernet Throughput. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25651.1.2.4.3.1.111 |
| locMaxRSL The Maximum RSL indicates the best (highest) RSL
that occurred since the last counter reset.
See Web, Monitor, Performance, Maximum RSL | scalar | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25651.1.2.4.3.1.12 |
| locMaxRSLstr The Maximum RSL level As string. | scalar | dBm SNMPv2-TCDisplayString | .1.3.6.1.4.1.25651.1.2.4.3.1.13 |
| locSampleDuration The Sample Duration indicates the amount of time passed since the last counter reset.
See Web, Monitor, Performance, Time Since Reset | scalar | Seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25651.1.2.4.3.1.14 |
| locSampleDurationStr The Sample Duration value as a formatted string. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.25651.1.2.4.3.1.15 |
| locEthPerfInterfaces Performance characteristics of local Ethernet interfaces | table | - | .1.3.6.1.4.1.25651.1.2.4.3.1.16 |
| locEthUtilizationWatermarkEnabled Ethernet utilization watermark enable(1)/disable(0).
See Web, Analysis, Ethernet Utilization, Ethernet Utilization Watermark. | scalar | ExaltCommExaltEnableT | .1.3.6.1.4.1.25651.1.2.4.3.1.17 |
| locEthUtilizationWatermark Ethernet utilization watermark level (%).
See Web, Analysis, Ethernet Utilization, Watermark level. | scalar | Integer32 | .1.3.6.1.4.1.25651.1.2.4.3.1.18 |
| locEthUtilizationWatermarkTrapEnabled Ethernet utilization watermark trap enable(1)/disable(0).
The watermark trap function allows administrators to receive an SNMP trap
when watermark conditions are exceeded.
See Web… | scalar | ExaltCommExaltEnableT | .1.3.6.1.4.1.25651.1.2.4.3.1.19 |
| locCurrentBERstr The Current Bit-Error Rate as a string. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.25651.1.2.4.3.1.2 |
| locEthUtilizationWatermarkTrapDuration Ethernet utilization trap limit in minutes/day (0-1440 minutes).
See Web, Analysis, Ethernet Utilization, Send trap if watermark hit duration exceeds. | scalar | Integer32 | .1.3.6.1.4.1.25651.1.2.4.3.1.20 |
| locCurrentRSL Current RSL is the measurement of the received signal level.
When the RSL falls below the threshold specification,
the link disconnects and will not reconnect until
the RSL is a… | scalar | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25651.1.2.4.3.1.3 |
| locCurrentRSLstr The Current RSL as a string. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.25651.1.2.4.3.1.4 |
| locErrorDuration The Error Duration indicates the total number of seconds that occurred where
there was at least one bit error since the last time that
the radio statistics counter was reset.
Se… | scalar | Seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25651.1.2.4.3.1.5 |
| locErrorDurationStr The Error Duration as a formatted string. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.25651.1.2.4.3.1.6 |
| locUnavailDuration Unavailable Duration keeps track of every second where the BER equals or exceeds 1x10-3,
as well as any seconds where there is a complete loss of radio communication.
See Web, Mo… | scalar | Seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25651.1.2.4.3.1.7 |
| locUnavailDurationStr The Unavailable Duration as a formatted string. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.25651.1.2.4.3.1.8 |
| locMinRSL The Minimum RSL indicates the worst (lowest) received signal level
that occurred since the last counter reset.
See Web, Monitor, Performance, Minimum RSL | scalar | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25651.1.2.4.3.1.9 |