extremeVplsNotifStatusOperStatus

EXTREME-MPLS-MIB · .1.3.6.1.4.1.1916.1.37.1.26
MIB view Table view

Object

scalar Enumeration 
The current operational state of this VPLS Service.
          
A value of up(1) indicates that all pseudo-wires for this  
 vpls are up and the attachment circuit is up.
          
A value of degraded(2) indicates that at least one
pseudo-wires for this vpls is up and the attachment circuit
 is up.
          
A value of down(3) indicates that all pseudo-wires for this  
 vpls are down or the attachment circuit is down.

Context

MIB
EXTREME-MPLS-MIB
OID
.1.3.6.1.4.1.1916.1.37.1.26
Type
scalar
Access
notifyonly
Status
current
Parent
extremeMplsScalars
Siblings
22

Syntax

Enumeration

Values & Constraints

Enumerated Values
1up
2degraded
3down

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
extremePwNotificationPeerAddrType
Denotes the address type of the peer node.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.1916.1.37.1.10
extremePwNotificationPeerAddr
This object contains the value of the peer node address.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.1916.1.37.1.11
extremeMplsNotifTunnelIndex
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Contains part of the index of a te tunnel that underwent state change. The same tunnel ca…
scalarMPLS-TC-STD-MIBMplsTunnelIndex.1.3.6.1.4.1.1916.1.37.1.12
extremeMplsNotifTunnelInstance
Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs.
scalarMPLS-TC-STD-MIBMplsTunnelInstanceIndex.1.3.6.1.4.1.1916.1.37.1.13
extremeMplsNotifTunnelIngressLSRId
Identity of the ingress LSR associated with this tunnel instance.
scalarMPLS-TC-STD-MIBMplsExtendedTunnelId.1.3.6.1.4.1.1916.1.37.1.14
extremeMplsNotifTunnelEgressLSRId
Identity of the egress LSR associated with this tunnel instance.
scalarMPLS-TC-STD-MIBMplsExtendedTunnelId.1.3.6.1.4.1.1916.1.37.1.15
extremeMplsNotifTunnelAdminStatus
Reports the desired operational status of this tunnel.
scalarEnumeration.1.3.6.1.4.1.1916.1.37.1.16
extremeMplsNotifTunnelOperStatus
Reports the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel.
scalarEnumeration.1.3.6.1.4.1.1916.1.37.1.17
extremeMplsNotifLdpEntityLdpId
The LDP identifier. This is the primary index to identify a row in the mplsLdpEntityTable (RFC 3815).
scalarMPLS-TC-STD-MIBMplsLdpIdentifier.1.3.6.1.4.1.1916.1.37.1.18
extremeMplsNotifLdpEntityIndex
This index is used as a secondary index to uniquely identify a row in the mplsLdpEntityTable (RFC 3815). This object is meaningful to some but not all, LDP implementati…
scalarIndexInteger.1.3.6.1.4.1.1916.1.37.1.19
extremeMplsNotifLdpPeerLdpId
The LDP identifier of this LDP Peer.
scalarMPLS-TC-STD-MIBMplsLdpIdentifier.1.3.6.1.4.1.1916.1.37.1.20
extremeMplsNotifLdpSessionState
The current state of the session, all of the states 1 to 5 are based on the state machine for session negotiation behavior.
scalarEnumeration.1.3.6.1.4.1.1916.1.37.1.21
extremeMplsNotifLdpSessionDiscontinuityTime
The initial value of this object is the value of sysUpTime when the entry was created in this table. Subsequent notifications report the time when the session between a…
scalarSNMPv2-TCTimeStamp.1.3.6.1.4.1.1916.1.37.1.22
extremeVplsNotifConfigIndex
Unique index for the conceptual row identifying a VPLS service in the vplsConfigTable.
scalarUnsigned32.1.3.6.1.4.1.1916.1.37.1.23
extremeVplsNotifConfigVpnId
This objects indicates the IEEE 802-1990 VPN ID of the associated VPLS service. This object has the same value as vplsConfigVpnId in the vplsConfigTable for an index v…
scalarVPN-TC-STD-MIBVPNIdOrZero.1.3.6.1.4.1.1916.1.37.1.24
extremeVplsNotifConfigAdminStatus
The administrative state of the VPLS service. This object has the same value as vplsConfigAdminStatus in the vplsConfigTable for an index value equal to extre…
scalarEnumeration.1.3.6.1.4.1.1916.1.37.1.25
extremePwNotificationLspIndex
This variable indicates the index of the LSP that was added to or deleted from a given PW as reported by the corresponding notification.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1916.1.37.1.27
extremePwUpDownNotificationEnable
If this object is set to true(1), then it enables the emission of pwUp and pwDown notifications; otherwise these notifications are not emitted.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.1916.1.37.1.5
extremePwDeletedNotificationEnable
If this object is set to true(1), then it enables the emission of pwDeleted notification; otherwise this notification is not emitted.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.1916.1.37.1.6
extremePwNotificationMaxRate
This variable indicates the maximum number of notifications issued per second. If events occur more rapidly, the implementation may simply fail to emit these notifications during …
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1916.1.37.1.7
extremePwNotificationPwIndex
This variable indicates the index of the pseudowire that either went up, down, or was deleted as reported by the corresponding notification. To obtain further informati…
scalarPW-TC-STD-MIBPwIndexType.1.3.6.1.4.1.1916.1.37.1.8
extremePwNotificationPwOperStatus
This variable is used to report the value of pwOperStatus in pwTable (RFC 5601) associated with the pseudowire that went up or down.
scalarPW-TC-STD-MIBPwOperStatusTC.1.3.6.1.4.1.1916.1.37.1.9