extremePwNotificationLspIndex
EXTREME-MPLS-MIB ·
.1.3.6.1.4.1.1916.1.37.1.27
Object
scalar
SNMPv2-SMIUnsigned32
This variable indicates the index of the LSP that was added to or deleted from a given PW as reported by the corresponding notification.
Context
- MIB
- EXTREME-MPLS-MIB
- OID
.1.3.6.1.4.1.1916.1.37.1.27- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- extremeMplsScalars
- Siblings
- 22
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| extremePwNotificationPeerAddrType Denotes the address type of the peer node. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.1916.1.37.1.10 |
| extremePwNotificationPeerAddr This object contains the value of the peer node address. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.1916.1.37.1.11 |
| extremeMplsNotifTunnelIndex Uniquely identifies a set of tunnel instances
between a pair of ingress and egress LSRs.
Contains part of the index of a te tunnel that underwent
state change.
The same tunnel ca… | scalar | MPLS-TC-STD-MIBMplsTunnelIndex | .1.3.6.1.4.1.1916.1.37.1.12 |
| extremeMplsNotifTunnelInstance Uniquely identifies a particular instance of a
tunnel between a pair of ingress and egress LSRs. | scalar | MPLS-TC-STD-MIBMplsTunnelInstanceIndex | .1.3.6.1.4.1.1916.1.37.1.13 |
| extremeMplsNotifTunnelIngressLSRId Identity of the ingress LSR associated with this
tunnel instance. | scalar | MPLS-TC-STD-MIBMplsExtendedTunnelId | .1.3.6.1.4.1.1916.1.37.1.14 |
| extremeMplsNotifTunnelEgressLSRId Identity of the egress LSR associated with this
tunnel instance. | scalar | MPLS-TC-STD-MIBMplsExtendedTunnelId | .1.3.6.1.4.1.1916.1.37.1.15 |
| extremeMplsNotifTunnelAdminStatus Reports the desired operational status of this tunnel. | scalar | Enumeration | .1.3.6.1.4.1.1916.1.37.1.16 |
| extremeMplsNotifTunnelOperStatus Reports the actual operational status of this
tunnel, which is typically but not limited to, a
function of the state of individual segments of
this tunnel. | scalar | Enumeration | .1.3.6.1.4.1.1916.1.37.1.17 |
| extremeMplsNotifLdpEntityLdpId The LDP identifier. This is the primary index to identify
a row in the mplsLdpEntityTable (RFC 3815). | scalar | MPLS-TC-STD-MIBMplsLdpIdentifier | .1.3.6.1.4.1.1916.1.37.1.18 |
| extremeMplsNotifLdpEntityIndex This index is used as a secondary index to uniquely identify
a row in the mplsLdpEntityTable (RFC 3815).
This object is meaningful to some but not all, LDP
implementati… | scalar | IndexInteger | .1.3.6.1.4.1.1916.1.37.1.19 |
| extremeMplsNotifLdpPeerLdpId The LDP identifier of this LDP Peer. | scalar | MPLS-TC-STD-MIBMplsLdpIdentifier | .1.3.6.1.4.1.1916.1.37.1.20 |
| extremeMplsNotifLdpSessionState The current state of the session, all of the
states 1 to 5 are based on the state machine
for session negotiation behavior. | scalar | Enumeration | .1.3.6.1.4.1.1916.1.37.1.21 |
| extremeMplsNotifLdpSessionDiscontinuityTime The initial value of this object is the value of
sysUpTime when the entry was created in this table.
Subsequent notifications report the time when the session
between a… | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.1916.1.37.1.22 |
| extremeVplsNotifConfigIndex Unique index for the conceptual row identifying
a VPLS service in the vplsConfigTable. | scalar | Unsigned32 | .1.3.6.1.4.1.1916.1.37.1.23 |
| extremeVplsNotifConfigVpnId This objects indicates the IEEE 802-1990 VPN ID of the
associated VPLS service.
This object has the same value as vplsConfigVpnId in the
vplsConfigTable for an index v… | scalar | VPN-TC-STD-MIBVPNIdOrZero | .1.3.6.1.4.1.1916.1.37.1.24 |
| extremeVplsNotifConfigAdminStatus The administrative state of the VPLS service.
This object has the same value as vplsConfigAdminStatus in the
vplsConfigTable for an index value equal to
extre… | scalar | Enumeration | .1.3.6.1.4.1.1916.1.37.1.25 |
| extremeVplsNotifStatusOperStatus The current operational state of this VPLS Service.
A value of up(1) indicates that all pseudo-wires for this
vpls are up and the attachment circuit is up.
… | scalar | Enumeration | .1.3.6.1.4.1.1916.1.37.1.26 |
| extremePwUpDownNotificationEnable If this object is set to true(1), then it enables
the emission of pwUp and pwDown
notifications; otherwise these notifications are not
emitted. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.37.1.5 |
| extremePwDeletedNotificationEnable If this object is set to true(1), then it enables the
emission of pwDeleted notification; otherwise this
notification is not emitted. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.37.1.6 |
| extremePwNotificationMaxRate This variable indicates the maximum number of
notifications issued per second. If events occur
more rapidly, the implementation may simply fail to
emit these notifications during … | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1916.1.37.1.7 |
| extremePwNotificationPwIndex This variable indicates the index of the pseudowire
that either went up, down, or was deleted as reported
by the corresponding notification.
To obtain further informati… | scalar | PW-TC-STD-MIBPwIndexType | .1.3.6.1.4.1.1916.1.37.1.8 |
| extremePwNotificationPwOperStatus This variable is used to report the value of pwOperStatus
in pwTable (RFC 5601) associated with the pseudowire that
went up or down. | scalar | PW-TC-STD-MIBPwOperStatusTC | .1.3.6.1.4.1.1916.1.37.1.9 |