eqlDiskStatus
EQLDISK-MIB ·
.1.3.6.1.4.1.12740.3.1.1.1.8
Object
column
Enumeration
Disk status will be on-line when the disk is being used in the raid set. Disk status will be spare when the disk is not currently being used by raid configuration but may be used when status of a currently on-line disk changes. Disk status will be failed when either it is faulted or when there is no power. Disk status will be offline when the disk doesn't fall into any of these other categories. Disk status will be alt-sig (foreign) when the disk belongs to a RAIDset from another EqualLogic system. The disk can be converted to a spare. Disk status will be too-small if drive is too small to be used. The drive cannot be converted to spare. Disk status will be history-of-failures if drive has a history of failures. The drive can be converted to spare. Disk status will be unsupported-version if drive label is from a later release. The drive can be converted to spare. Disk status will be unhealthy if drive is unhealthy. Disk status will be replacement if drive is a replacement drive. Disk status will be encrypted if the drive is encrypted and cannot be decrypted. Disk status will be notApproved if the drive is not DELL approved. Disk status will be preempt-failed if the drive is off-line due to excessive errors.
Context
- MIB
- EQLDISK-MIB
- OID
.1.3.6.1.4.1.12740.3.1.1.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- eqlDiskEntry
- Table
- eqlDiskTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | dsx1NoLoop |
2 | dsx1PayloadLoop |
3 | dsx1LineLoop |
4 | dsx1OtherLoop |
5 | dsx1InwardLoop |
6 | dsx1DualLoop |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqlDiskIndex The index value that uniquely identifies the disk.
It is equal to the disk slot number plus one. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.3.1.1.1.1 |
| eqlDiskId This variable specifies the disk id as specified by the subsystem. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.3.1.1.1.10 |
| eqlDiskSlot The zero-based slot number for the physical location of this disk, as marked on the back panel. | column | Integer32 | .1.3.6.1.4.1.12740.3.1.1.1.11 |
| eqlDiskTypeEnum Type of this disk. | column | Enumeration | .1.3.6.1.4.1.12740.3.1.1.1.12 |
| eqlDiskRPM This variable specifies the disk RPM(Revolutions per Minute) as specified by the manufacturer not measured.
if 0, disk RPM is unknown,
if 1, disk is non-rotating media - SSD(Solid… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.3.1.1.1.13 |
| eqlDiskSectorSize This variable specifies the disk sector size as specified by the manufacturer.
if 0, disk sector size is 512 bytes,
if 1, disk sector size is 4096 bytes | column | Enumeration | .1.3.6.1.4.1.12740.3.1.1.1.14 |
| eqlDiskManufacturingInfo This variable specifies manufacturing data for the drive. | column | OctetString | .1.3.6.1.4.1.12740.3.1.1.1.15 |
| eqlDiskPI This variable specifies whether Protection Information (PI) is enabled on the drive. | column | Enumeration | .1.3.6.1.4.1.12740.3.1.1.1.16 |
| eqlDiskHealth Disk status will be smart-status-not-available when the disk is offline or failed.
Disk status will be smart-ok when the disk does not report itself to have exceeded its internal
… | column | Enumeration | .1.3.6.1.4.1.12740.3.1.1.1.17 |
| eqlDiskType This variable specifies the disk type. | column | OctetString | .1.3.6.1.4.1.12740.3.1.1.1.2 |
| eqlDiskModelNumber This variable specifies the disk model. | column | OctetString | .1.3.6.1.4.1.12740.3.1.1.1.3 |
| eqlDiskRevisionNumber This variable specifies the disk revision number. | column | OctetString | .1.3.6.1.4.1.12740.3.1.1.1.4 |
| eqlDiskSerialNumber This variable specifies the disk serial number. | column | OctetString | .1.3.6.1.4.1.12740.3.1.1.1.5 |
| eqlDiskSize This variable specifies the disk size in MB. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.3.1.1.1.6 |
| eqlDiskAdminStatus Command to take the disk off line or put it on line.
This command is used in manual operation by the operator. | column | Enumeration | .1.3.6.1.4.1.12740.3.1.1.1.7 |
| eqlDiskErrors This variable specifies the number of disk errors since drive power on. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.12740.3.1.1.1.9 |