eqlDiskManufacturingInfo
EQLDISK-MIB ·
.1.3.6.1.4.1.12740.3.1.1.1.15
Object
column
OctetString
This variable specifies manufacturing data for the drive.
Context
- MIB
- EQLDISK-MIB
- OID
.1.3.6.1.4.1.12740.3.1.1.1.15- Type
- column
- Access
- readonly
- Status
- current
- Parent
- eqlDiskEntry
- Table
- eqlDiskTable
- Siblings
- 16
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-20
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqlDiskIndex The index value that uniquely identifies the disk.
It is equal to the disk slot number plus one. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.3.1.1.1.1 |
| eqlDiskId This variable specifies the disk id as specified by the subsystem. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.3.1.1.1.10 |
| eqlDiskSlot The zero-based slot number for the physical location of this disk, as marked on the back panel. | column | Integer32 | .1.3.6.1.4.1.12740.3.1.1.1.11 |
| eqlDiskTypeEnum Type of this disk. | column | Enumeration | .1.3.6.1.4.1.12740.3.1.1.1.12 |
| eqlDiskRPM This variable specifies the disk RPM(Revolutions per Minute) as specified by the manufacturer not measured.
if 0, disk RPM is unknown,
if 1, disk is non-rotating media - SSD(Solid… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.3.1.1.1.13 |
| eqlDiskSectorSize This variable specifies the disk sector size as specified by the manufacturer.
if 0, disk sector size is 512 bytes,
if 1, disk sector size is 4096 bytes | column | Enumeration | .1.3.6.1.4.1.12740.3.1.1.1.14 |
| eqlDiskPI This variable specifies whether Protection Information (PI) is enabled on the drive. | column | Enumeration | .1.3.6.1.4.1.12740.3.1.1.1.16 |
| eqlDiskHealth Disk status will be smart-status-not-available when the disk is offline or failed.
Disk status will be smart-ok when the disk does not report itself to have exceeded its internal
… | column | Enumeration | .1.3.6.1.4.1.12740.3.1.1.1.17 |
| eqlDiskType This variable specifies the disk type. | column | OctetString | .1.3.6.1.4.1.12740.3.1.1.1.2 |
| eqlDiskModelNumber This variable specifies the disk model. | column | OctetString | .1.3.6.1.4.1.12740.3.1.1.1.3 |
| eqlDiskRevisionNumber This variable specifies the disk revision number. | column | OctetString | .1.3.6.1.4.1.12740.3.1.1.1.4 |
| eqlDiskSerialNumber This variable specifies the disk serial number. | column | OctetString | .1.3.6.1.4.1.12740.3.1.1.1.5 |
| eqlDiskSize This variable specifies the disk size in MB. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.3.1.1.1.6 |
| eqlDiskAdminStatus Command to take the disk off line or put it on line.
This command is used in manual operation by the operator. | column | Enumeration | .1.3.6.1.4.1.12740.3.1.1.1.7 |
| eqlDiskStatus Disk status will be on-line when the disk is being used in the raid set.
Disk status will be spare when the disk is not currently being used by raid configuration
but may be u… | column | Enumeration | .1.3.6.1.4.1.12740.3.1.1.1.8 |
| eqlDiskErrors This variable specifies the number of disk errors since drive power on. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.12740.3.1.1.1.9 |