etsysPolicyRuleStatsAutoClearOnProfile
ENTERASYS-POLICY-PROFILE-MIB ·
.1.3.6.1.4.1.5624.1.2.6.11.14
Object
If set to enabled(1), when a rule assigning a PolicyProfile (whose etsysPolicyRuleProfileIndex is zero(0)) is activated, all the rule usage bits associated with the rules bound to the PolicyProfile specified by the etsysPolicyRuleOperPid and the port specified by the etsysPolicyRulePort are cleared (if there is no port specified or no valid etsysPolicyRuleProfileIndex specified, then no action follows). This ability is further scoped to the list of ports defined by etsysPolicyRuleStatsAutoClearPorts. This leaf is optional and will have no effect on an agent which has rule use accounting disabled or does not support rule use accounting. By default, the rule use accounting information will not be modified by the creation or activation of PolicyProfile assignment rules.
Context
- MIB
- ENTERASYS-POLICY-PROFILE-MIB
- OID
.1.3.6.1.4.1.5624.1.2.6.11.14- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- etsysPolicyRules
- Siblings
- 19
Syntax
P-BRIDGE-MIBEnabledStatus
- Source
- P-BRIDGE-MIBEnabledStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| etsysPolicyRulesMaxEntries The maximum number of entries allowed in the
etsysPolicyRulesTable. | scalar | Integer32 | .1.3.6.1.4.1.5624.1.2.6.11.1 |
| etsysPolicyRuleDefaultDynamicTrapStatus If enabled(1), rules dynamically created will set
etsysPolicyRuleAuditTrapEnable to enabled. If
disabled(2) a dynamically created rule will have
etsysPolicyRuleAuditTrapEnable s… | scalar | TriStateStatus | .1.3.6.1.4.1.5624.1.2.6.11.10 |
| etsysPolicyRuleStatsAutoClearOnLink If set to enabled(1), when operstatus up is detected on any
port the agent will clear the rule usage information
associated with that port.
This ability is further scoped to t… | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.6.11.11 |
| etsysPolicyRuleStatsAutoClearInterval The interval at which the device will automatically clear rule
usage statistics, in minutes. This ability is disabled (usage
statistics will not be automatically cleared) if set … | scalar | Integer32 | .1.3.6.1.4.1.5624.1.2.6.11.12 |
| etsysPolicyRuleStatsAutoClearPorts The list ports on which rule usage statistics will be
cleared by one of the AutoClear actions
(etsysPolicyRuleStatsAutoClearInterval,
etsysPolicyRuleStatsAutoClearOnProfile, … | scalar | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.5624.1.2.6.11.13 |
| etsysPolicyRuleStatsDroppedNotifications A count of the number of times the agent has dropped
notification (syslog or trap) of a etsysPolicyRuleUsageList
bit transition. A management entity might use this leaf as
an … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5624.1.2.6.11.15 |
| etsysPolicyRuleSylogMachineReadableFormat If enabled, the device should format rule usage messages so
that they might be processed by a machine (scripting backend,
etc). If disabled, the messages should be formatted fo… | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.6.11.16 |
| etsysPolicyRuleSylogExtendedFormat If enabled, the device should provide additional information
in rule-hit syslog messages. This information MAY include what
actions may have been initiated by the rule (if any) o… | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.6.11.17 |
| etsysPolicyRuleSylogEveryTime If enabled, the device will syslog on every rule hit (or profile
hit) which specifies SYSLOG as the action, instead of only when
the associated bit in the etsysPolicyProfileUsageL… | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.6.11.18 |
| etsysPolicyNonVolatileRulesLastChange The sysUpTime at which the etsysPolicyNonVolatileRuleTable
was last modified. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.5624.1.2.6.11.19 |
| etsysPolicyRulesNumEntries The current number of entries in the
etsysPolicyRulesTable. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5624.1.2.6.11.2 |
| etsysPolicyNonVolatileRuleTable A table containing rules bound to individual policies. The
rules here contained are representations of the non-volatile
rules contained in the etsysPolicyRuleTable defined in th… | table | - | .1.3.6.1.4.1.5624.1.2.6.11.20 |
| etsysPolicyRulesLastChange The sysUpTime at which the etsysPolicyRulesTable
was last modified. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.5624.1.2.6.11.3 |
| etsysPolicyRulesAccountingEnable Controls the collection of rule usage statistics. If
disabled, no usage statistics are gathered and no auditing
messages will be sent. When enabled, rule will gather
usage sta… | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.6.11.4 |
| etsysPolicyRulesPortDisabledList A portlist containing bits representing the dot1dBridgePorts
which have been disabled via the mechanism described in the
etsysPolicyRuleDisablePort leaf. A set bit indicates a
… | scalar | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.5624.1.2.6.11.5 |
| etsysPolicyRuleTable A table containing rules bound to individual policies. A
Rule is comprised of three components, a unique description
of the network traffic, an associated list of actions, and
an… | table | - | .1.3.6.1.4.1.5624.1.2.6.11.6 |
| etsysPolicyRulePortTable The purpose of this table is to provide an agent the
ability to easily determine which rules have been used
on a given bridge port. A row will only be present when
the rule which… | table | - | .1.3.6.1.4.1.5624.1.2.6.11.7 |
| etsysPolicyRuleDynamicProfileAssignmentOverride If true, administratively assigned profile assignment
rules override dynamically assigned profiles assignments
for a given rule. If false, the dynamically assigned
value (typica… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5624.1.2.6.11.8 |
| etsysPolicyRuleDefaultDynamicSyslogStatus If enabled(1), rules dynamically created will set
etsysPolicyRuleAuditSyslogEnable to enabled. If
disabled(2) a dynamically created rule will have
etsysPolicyRuleAuditSyslogEnab… | scalar | TriStateStatus | .1.3.6.1.4.1.5624.1.2.6.11.9 |