etsysEntitySfpSensorSupportedSpeeds
ENTERASYS-ENTITY-SENSOR-MIB-EXT-MIB ·
.1.3.6.1.4.1.5624.1.2.85.1.2.1.1.12
Object
column
Integer32
This value represents the set of speeds supported
by transceivers present in the platform. For each
speed capability, 2 raised to the power noted below
is added to the sum. The unit for speed capability
is 1 Mbps.
For example, a transceiver that supports 10G would
have a value of (2**6) or 64. In contrast, a transceiver
that supports both 1G and 10G would have a value of
((2**3) + (2**6)) or 72.
Power Capability
0 other or unknown
1 10
2 100
3 1000
4 2500
5 5000
6 10000
7 20000
8 25000
9 40000
10 50000
11 100000
12 400000
Context
- MIB
- ENTERASYS-ENTITY-SENSOR-MIB-EXT-MIB
- OID
.1.3.6.1.4.1.5624.1.2.85.1.2.1.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- etsysEntitySfpSensorExtEntry
- Table
- etsysEntitySfpSensorExtTable
- Siblings
- 11
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| etsysEntitySfpSensorState This object indicates the state of the SFP sensor. | column | Enumeration | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.1 |
| etsysEntitySfpSensorRxDdm This value represents the Rx dB from low alarm. Host sets
it after the first 48 consecutive hours of operation since
PMD power cycle. Update only if Rx_LOS is not asserted. | column | Integer32 | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.10 |
| etsysEntitySfpSensorRxDdmLastGasp This value represents the last gasp of Rx dB from low alarm.
Host updates it every 48 hours. Update only if Rx_LOS is
not asserted. | column | Integer32 | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.11 |
| etsysEntitySfpSensorHighAlarm The threshold value above which the sensor reading
indicates an alarm state.
To correctly interpret the value of this object, the
associated entPhySensorType, entPh… | column | ENTITY-SENSOR-MIBEntitySensorValue | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.2 |
| etsysEntitySfpSensorHighWarning The threshold value above which the sensor reading
indicates a warning state, if it is below or equal the
hi alarm value.
To correctly interpret the value of this o… | column | ENTITY-SENSOR-MIBEntitySensorValue | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.3 |
| etsysEntitySfpSensorLowWarning The threshold value below which the sensor reading
indicates a warning state, if it is above or equal the
lo alarm value.
To correctly interpret the value of this o… | column | ENTITY-SENSOR-MIBEntitySensorValue | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.4 |
| etsysEntitySfpSensorLowAlarm The threshold value below which the sensor reading
indicates an alarm state.
To correctly interpret the value of this object, the
associated entPhySensorType, entPh… | column | ENTITY-SENSOR-MIBEntitySensorValue | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.5 |
| etsysEntitySfpSensorWavelength This object indicates nominal transmitter output wavelength
at room temperature. It is expressed in nano-meters. | column | Integer32 | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.6 |
| etsysEntitySfpSensorPowerOnCounter This object indicates the power-on counter. Host increments
it by 1 every 48 hours. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.7 |
| etsysEntitySfpSensorTxDdm This value represents the Tx dB from low alarm. Host sets
it once only, after the first 48 consecutive hours of operation.
Update only if Tx_disable is not active. | column | Integer32 | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.8 |
| etsysEntitySfpSensorTxDdmLastGasp This value represents the last gasp of Tx dB from low alarm.
Host updates it every 48 hours. Update only if Tx_disable is
not active. | column | Integer32 | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.9 |