etsysEntitySfpSensorState
ENTERASYS-ENTITY-SENSOR-MIB-EXT-MIB ·
.1.3.6.1.4.1.5624.1.2.85.1.2.1.1.1
Object
column
Enumeration
This object indicates the state of the SFP sensor.
Context
- MIB
- ENTERASYS-ENTITY-SENSOR-MIB-EXT-MIB
- OID
.1.3.6.1.4.1.5624.1.2.85.1.2.1.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- etsysEntitySfpSensorExtEntry
- Table
- etsysEntitySfpSensorExtTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unknown |
2 | lowAlarm |
3 | lowWarning |
4 | normal |
5 | highWarning |
6 | highAlarm |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| etsysEntitySfpSensorRxDdm This value represents the Rx dB from low alarm. Host sets
it after the first 48 consecutive hours of operation since
PMD power cycle. Update only if Rx_LOS is not asserted. | column | Integer32 | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.10 |
| etsysEntitySfpSensorRxDdmLastGasp This value represents the last gasp of Rx dB from low alarm.
Host updates it every 48 hours. Update only if Rx_LOS is
not asserted. | column | Integer32 | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.11 |
| etsysEntitySfpSensorSupportedSpeeds This value represents the set of speeds supported
by transceivers present in the platform. For each
speed capability, 2 raised to the power noted below
is added to the sum. The … | column | Integer32 | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.12 |
| etsysEntitySfpSensorHighAlarm The threshold value above which the sensor reading
indicates an alarm state.
To correctly interpret the value of this object, the
associated entPhySensorType, entPh… | column | ENTITY-SENSOR-MIBEntitySensorValue | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.2 |
| etsysEntitySfpSensorHighWarning The threshold value above which the sensor reading
indicates a warning state, if it is below or equal the
hi alarm value.
To correctly interpret the value of this o… | column | ENTITY-SENSOR-MIBEntitySensorValue | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.3 |
| etsysEntitySfpSensorLowWarning The threshold value below which the sensor reading
indicates a warning state, if it is above or equal the
lo alarm value.
To correctly interpret the value of this o… | column | ENTITY-SENSOR-MIBEntitySensorValue | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.4 |
| etsysEntitySfpSensorLowAlarm The threshold value below which the sensor reading
indicates an alarm state.
To correctly interpret the value of this object, the
associated entPhySensorType, entPh… | column | ENTITY-SENSOR-MIBEntitySensorValue | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.5 |
| etsysEntitySfpSensorWavelength This object indicates nominal transmitter output wavelength
at room temperature. It is expressed in nano-meters. | column | Integer32 | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.6 |
| etsysEntitySfpSensorPowerOnCounter This object indicates the power-on counter. Host increments
it by 1 every 48 hours. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.7 |
| etsysEntitySfpSensorTxDdm This value represents the Tx dB from low alarm. Host sets
it once only, after the first 48 consecutive hours of operation.
Update only if Tx_disable is not active. | column | Integer32 | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.8 |
| etsysEntitySfpSensorTxDdmLastGasp This value represents the last gasp of Tx dB from low alarm.
Host updates it every 48 hours. Update only if Tx_disable is
not active. | column | Integer32 | .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.9 |