etsysConvEndPointDetectionEndPointType
ENTERASYS-CONVERGENCE-END-POINT-MIB ·
.1.3.6.1.4.1.5624.1.2.40.1.3.2.1.2
Object
column
r/w
Enumeration
The Convergence End Point device type that a 'hit' on this rule will indicate the presence of.
Context
- MIB
- ENTERASYS-CONVERGENCE-END-POINT-MIB
- OID
.1.3.6.1.4.1.5624.1.2.40.1.3.2.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- etsysConvEndPointDetectionEntry
- Table
- etsysConvEndPointDetectionTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | h323 |
1 | siemens |
2 | sip |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| etsysConvEndPointDetectionRuleIndex The index of this conceptual row. This row represents a
single rule for determining if an incoming IP packet
indicates the presence of a Convergence End Point device.
The lower t… | column | Integer32 | .1.3.6.1.4.1.5624.1.2.40.1.3.2.1.1 |
| etsysConvEndPointDetectionRowStatus The status of this row as defined by the RowStatus textual
convention.
Rows in this table can only transition to 'notInService',
or to 'active' if the etsysConvEndP… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.5624.1.2.40.1.3.2.1.10 |
| etsysConvEndPointDetectionProtocol The IP protocol type that the following port range
applies to. If no bits are set then the destination
port will not be evaluated as part of the detection
process. | column | Bits | .1.3.6.1.4.1.5624.1.2.40.1.3.2.1.3 |
| etsysConvEndPointDetectionPortLow The low end of the range of the IP destination port that
will be used for Convergence End Point detection. This
value represents the low value in a range of port numbers
that will… | column | Integer32 | .1.3.6.1.4.1.5624.1.2.40.1.3.2.1.4 |
| etsysConvEndPointDetectionPortHigh The high end of the range of the IP destination port that
will be used for Convergence End Point detection. This
value represents the high value in a range of port numbers
that wi… | column | Integer32 | .1.3.6.1.4.1.5624.1.2.40.1.3.2.1.5 |
| etsysConvEndPointDetectionAddrType The destination address type that will be used for Convergence
End Point detection. If the address type is 'unknown', then
this value will not be evaluated as part of the detectio… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.5624.1.2.40.1.3.2.1.6 |
| etsysConvEndPointDetectionAddr The destination IP address that will be used for Convergence
End Point detection. If this address is null, then this value
will not be evaluated as part of the detection process. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.5624.1.2.40.1.3.2.1.7 |
| etsysConvEndPointDetectionAddrMaskType The address type of the mask that will be applied to the
destination IP address as part of the Convergence End Point
detection process. If the address type is 'unknown', then
thi… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.5624.1.2.40.1.3.2.1.8 |
| etsysConvEndPointDetectionAddrMask The destination address mask that will be used for Convergence
End Point detection. If the mask is null, then this value will
not be evaluated as part of the detection process. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.5624.1.2.40.1.3.2.1.9 |