mldSnoopQueryMaxResponseTime
ECS2100-MIB ·
.1.3.6.1.4.1.259.10.1.43.1.54.5
Object
scalar
r/w
Integer32
The time after a query, during which a response is expected from an endstation. If a querier has sent a number of queries defined by mldSnoopRobustness, but an endstation has not responded, a countdown timer is started using an initial value set by mldSnoopQueryMaxResponseTime. If the countdown finishes, and the endstation still has not responded, then that the endstation is deemed to have left the multicast group.
Context
- MIB
- ECS2100-MIB
- OID
.1.3.6.1.4.1.259.10.1.43.1.54.5- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- mldSnoopMgt
- Siblings
- 23
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mldSnoopStatus Parameter to enable or disable MLD snooping on the device.
When enabled, the device will examine MLD packets and set
up filters for MLD ports. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.43.1.54.1 |
| mldSnoopRouterStaticTable Table for static router ports. | table | - | .1.3.6.1.4.1.259.10.1.43.1.54.10 |
| mldSnoopMulticastCurrentTable Table for current multicast addresses. | table | - | .1.3.6.1.4.1.259.10.1.43.1.54.11 |
| mldSnoopMulticastStaticTable Table for static multicast addresses. | table | - | .1.3.6.1.4.1.259.10.1.43.1.54.12 |
| mldSnoopCurrentVlanTable Table for configuring MLD snooping for each VLAN
which exists in the device by (local or network)
management, or dynamically created as a result of
GVRP requests received. | table | - | .1.3.6.1.4.1.259.10.1.43.1.54.13 |
| mldSnoopProxyReporting Parameter to enable or disable MLD snooping proxy reporting
on the device. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.43.1.54.14 |
| mldSnoopUnsolicitedReportInterval Setting this value to specify how long (in seconds) the
uplink ports should transmit unsolicited reports. | scalar | Unsigned32 | .1.3.6.1.4.1.259.10.1.43.1.54.15 |
| mldSnoopPortTable Table of MLD Snooping service per port. | table | - | .1.3.6.1.4.1.259.10.1.43.1.54.16 |
| mldSnoopFilterStatus Parameter to enable or disable MLD filtering on the device. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.43.1.54.17 |
| mldSnoopProfileTable The table for configuring the MLD snooping profile. | table | - | .1.3.6.1.4.1.259.10.1.43.1.54.18 |
| mldSnoopProfileCtl | node | - | .1.3.6.1.4.1.259.10.1.43.1.54.19 |
| mldSnoopQuerier Enables (disables) whether the switch acts as an MLD
querier. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.43.1.54.2 |
| mldSnoopProfileRangeTable The table for configuring the range of the MLD snooping
profile. | table | - | .1.3.6.1.4.1.259.10.1.43.1.54.20 |
| mldSnoopFilterPortTable Table for port configuration in MLD filtering. | table | - | .1.3.6.1.4.1.259.10.1.43.1.54.21 |
| mldSnoopThrottlePortTable Table for port configuration in MLD throttling. | table | - | .1.3.6.1.4.1.259.10.1.43.1.54.22 |
| mldSnoopClearDynamicGroups The current number of MLD groups that the interface has joined. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.43.1.54.23 |
| mldSnoopVlanTable Table of MLD Snooping service per port. | table | - | .1.3.6.1.4.1.259.10.1.43.1.54.24 |
| mldSnoopRobustness The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. MLD is
robust to (Ro… | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.43.1.54.3 |
| mldSnoopQueryInterval The interval (in seconds) between MLD host-query
messages sent by the switch. | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.43.1.54.4 |
| mldSnoopRouterPortExpireTime Sets the time (in seconds) the switch waits after
the previous querier has stopped querying before
the router port (which received query packets from
previous querier) expires. | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.43.1.54.6 |
| mldSnoopVersion MLD version snooped | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.43.1.54.7 |
| mldSnoopUnknownMcastMode Sets the mldSnoopUnknownMcastMode to define the flooding
behavior when receive the unknown multicast traffic. | scalar | Enumeration | .1.3.6.1.4.1.259.10.1.43.1.54.8 |
| mldSnoopRouterCurrentTable Table for current router ports. | table | - | .1.3.6.1.4.1.259.10.1.43.1.54.9 |