igmpSnoopReportSuppressionStatus
ECS2100-MIB ·
.1.3.6.1.4.1.259.10.1.43.1.9.16
Object
Parameter to enable or disable IGMP snooping report suppression on the device. When enabled, the device will suppress superabundance report and leave packets. Only the First copy of Report Packet or the Last copy of Leave Packet for the same Group will be forwarded to route ports. Status changed to deprecated:this function is always enable.
Context
- MIB
- ECS2100-MIB
- OID
.1.3.6.1.4.1.259.10.1.43.1.9.16- Type
- scalar
- Access
- readwrite
- Status
- deprecated
- Parent
- igmpSnoopMgt
- Siblings
- 21
Syntax
P-BRIDGE-MIBEnabledStatus
- Source
- P-BRIDGE-MIBEnabledStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| igmpSnoopStatus Parameter to enable or disable IGMP snooping on the device.
When enabled, the device will examine IGMP packets and set
up filters for IGMP ports. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.43.1.9.1 |
| igmpSnoopMulticastStaticTable Table for static multicast addresses. | table | - | .1.3.6.1.4.1.259.10.1.43.1.9.11 |
| igmpSnoopCurrentVlanTable Table for enabling or disabling IGMP snooping per VLAN. | table | - | .1.3.6.1.4.1.259.10.1.43.1.9.14 |
| igmpSnoopMulticastGroupTable Table for current multicast addresses. | table | - | .1.3.6.1.4.1.259.10.1.43.1.9.15 |
| igmpSnoopFilterStatus Parameter to enable or disable IGMP filtering on the device. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.43.1.9.17 |
| igmpSnoopProfileTable The table for configuring the IGMP snooping profile. | table | - | .1.3.6.1.4.1.259.10.1.43.1.9.18 |
| igmpSnoopProfileCtl | node | - | .1.3.6.1.4.1.259.10.1.43.1.9.19 |
| igmpSnoopQuerier Enables (disables) whether the switch acts as an IGMP
querier. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.10.1.43.1.9.2 |
| igmpSnoopProfileRangeTable The table for configuring the range of the IGMP snooping
profile. | table | - | .1.3.6.1.4.1.259.10.1.43.1.9.20 |
| igmpSnoopFilterPortTable Table for port configuration in IGMP filtering. | table | - | .1.3.6.1.4.1.259.10.1.43.1.9.21 |
| igmpSnoopThrottlePortTable Table for port configuration in IGMP throttling. | table | - | .1.3.6.1.4.1.259.10.1.43.1.9.22 |
| igmpSnoopPortTable Table of IGMP Snooping service per port. | table | - | .1.3.6.1.4.1.259.10.1.43.1.9.27 |
| igmpSnoopGlobalMgt | node | - | .1.3.6.1.4.1.259.10.1.43.1.9.28 |
| igmpSnoopForwardingPriority Configure IGMP snooping multicast stream forwarding priority.
If value is 65535, it means the priority is disabled | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.43.1.9.29 |
| igmpSnoopQueryDropTable Table of IGMP Snooping query drop per vlan and per vlan configuration. | table | - | .1.3.6.1.4.1.259.10.1.43.1.9.30 |
| igmpSnoopClearDynamicGroups Clear all IGMP groups which are learned by IGMP report and MVR. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.10.1.43.1.9.32 |
| igmpSnoopVlanTable Table of IGMP Snooping service per port. | table | - | .1.3.6.1.4.1.259.10.1.43.1.9.33 |
| igmpSnoopRouterPortExpireTime Sets the time (in seconds) the switch waits after
the previous querier has stopped querying before
the router port (which received query packets from
previous querier) expires. | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.43.1.9.6 |
| igmpSnoopVersion IGMP version snooped | scalar | Integer32 | .1.3.6.1.4.1.259.10.1.43.1.9.7 |
| igmpSnoopRouterCurrentTable Table for current router ports. | table | - | .1.3.6.1.4.1.259.10.1.43.1.9.8 |
| igmpSnoopRouterStaticTable Table for static router ports. | table | - | .1.3.6.1.4.1.259.10.1.43.1.9.9 |