dupsAlarmOutVoltOverLimit
DeltaUPSv5-MIB ·
.1.3.6.1.4.1.2254.2.5.9.24
Object
scalar
mandatory
Enumeration
To indicate the output voltage is over limit.
Context
- MIB
- DeltaUPSv5-MIB
- OID
.1.3.6.1.4.1.2254.2.5.9.24- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- dupsAlarm
- Siblings
- 37
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | on |
2 | off |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dupsAlarmDisconnect mandatory Indicate the communication of the UPS is connected
or disconnect? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.1 |
| dupsAlarmOutputOverload mandatory The output load exceeds the UPS output capacity. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.10 |
| dupsAlarmInverterAbnormal mandatory Representing the inverter fail alarm. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.11 |
| dupsAlarmLoadOnReserve mandatory Does the UPS load on reserve? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.12 |
| dupsAlarmTemperature mandatory Representing one of the temperature sensors has
been determined its value is out of the limits. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.13 |
| dupsAlarmBypassOutOfRange mandatory The bypass power is out of range. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.14 |
| dupsAlarmStandby mandatory The UPS system is in the standby state. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.15 |
| dupsAlarmChargerFail mandatory An incorrected problem has been detected
within the UPS charger subsystem | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.16 |
| dupsAlarmFanFail mandatory The failure of one or more fans in the UPS
has been detected. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.17 |
| dupsAlarmEconomicMode mandatory The UPS is working in the economic mode
(act like an off-line UPS). | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.18 |
| dupsAlarmOutputOff mandatory UPS output is turned off. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.19 |
| dupsAlarmInputOutOfRange mandatory Representing the input power is out of tolerance.
This item is used to indicate the input power fail,
a test condition should not set this item on. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.2 |
| dupsAlarmSmartShutdown mandatory Indicates whether the Smart Shutdown is in progress. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.20 |
| dupsAlarmEmergencyPowerOff mandatory Representing the UPS is shutdown due to the
Emergency Power Off button is pressed. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.21 |
| dupsAlarmUPSShutdown mandatory The UPS has been shutdown including remote and
fault shutdown. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.22 |
| dupsAlarmEPO mandatory Representing the UPS is shutdown due to the
Emergency Power Off button is pressed. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.23 |
| dupsAlarmOutVoltUnderLimit mandatory To indicate the output voltage is under limit. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.25 |
| dupsAlarmPowerModule mandatory To indicate there is at least one alarm from power module. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.26 |
| dupsAlarmOutputBreaker mandatory To indicate the output breaker is detected open or close. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.27 |
| dupsAlarmOutletBank1Breaker mandatory To indicate the outlet bank-1 breaker is detected open or close. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.28 |
| dupsAlarmOutletBank2Breaker mandatory To indicate the outlet bank-2 breaker is detected open or close. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.29 |
| dupsAlarmBatteryLow mandatory Are the UPS batteries low? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.3 |
| dupsAlarmOutletBank3Breaker mandatory To indicate the outlet bank-3 breaker is detected open or close. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.30 |
| dupsAlarmOutletBank4Breaker mandatory To indicate the outlet bank-4 breaker is detected open or close. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.31 |
| dupsAlarmSummary mandatory To indicate the alarm level for the UPS. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.32 |
| dupsAlarmRedundancyLoss mandatory To indicate the capacity of redundancy lost in a modular UPS. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.33 |
| dupsAlarmPhaseAsynchronous mandatory To indicate the Phase is detected asynchronous or synchronous. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.34 |
| dupsAlarmRectifierAbnormal mandatory To indicate the Rectifier is detected alarm or normal. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.35 |
| dupsAlarmBypassBreakerOpen mandatory To indicate the bypass breaker is detected open or close. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.36 |
| dupsAlarmMainInputBreakerOpen mandatory To indicate the main input breaker is detected open or close. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.37 |
| dupsAlarmManualBypassBreaker mandatory To indicate the manual bypass breaker is detected open or close. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.38 |
| dupsAlarmLoadOnBypass mandatory Does the UPS load on bypass? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.4 |
| dupsAlarmOther mandatory Indicate there is an alarm detected but which
is not defined here. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.5 |
| dupsAlarmBatteryGroundFault mandatory To indicate the battery ground fault has
been detected. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.6 |
| dupsAlarmTestInProgress mandatory Does the UPS test in progress? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.7 |
| dupsAlarmBatteryTestFail mandatory Does the UPS test fail? | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.8 |
| dupsAlarmFuseFailure mandatory The failure of one or more fuses has been detected. | scalar | Enumeration | .1.3.6.1.4.1.2254.2.5.9.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| IT-WATCHDOGS-V4-MIBrpmSensorVoltageMax RPM Sensor Voltage (Max) | column | Volts (rms) SNMPv2-SMIGauge32 | .1.3.6.1.4.1.17373.4.1.10.1.7 |